Skip to lesson
1

Topic 15 · Ideal gases

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

Cambridge International A Level Physics 9702

The whole topic in one idea: macroscopic pressure, volume and temperature are linked to the number and random motion of microscopic particles.

Exact syllabus boundary
15.1 amount of substance; 15.2 equation of state for an ideal gas; 15.3 kinetic theory. Total internal-energy calculations and first-law bookkeeping belong to Topic 16.

15.1 · Amount of substance

Syllabus precision
Amount of substance is an SI base quantity, and its SI base unit is the mole (mol). One mole contains the Avogadro constant number of specified entities.
One mole contains the Avogadro constant number of specified entities: $N_A=6.02×10^{23}$ mol−1.
Mole and particle conversion bridgeMass is divided by molar mass to obtain amount in moles. Amount is multiplied by the Avogadro constant to obtain particle number.mass mkg or g consistentlyamount nmolparticles Nmolecules / atoms÷ M× Nₐ
$n=m/M,\qquad N=nN_A$

$m$ and molar mass $M$ must use compatible mass units. State the entity: atoms, molecules, ions or formula units.

Worked example
4.40 g of carbon dioxide, molar mass 44.0 g mol−1, is 0.100 mol and contains $6.02×10^{22}$ molecules. It contains three times as many atoms because each molecule has three atoms.
Common mistake
$n$ is amount in moles; $N$ is a number of particles. Never put $N$ into $pV=nRT$ or $n$ into $pV=NkT$.
2

Equation of state

Gas in a cylinder with a movable pistonA gas of volume V and pressure p is below a movable piston carrying a load. A thermometer indicates thermodynamic temperature T.Tmeasure p, V and thermodynamic T in SI units
An ideal gas obeys $pV∝T$ for a fixed amount of gas, with thermodynamic temperature $T$ in kelvin.
$pV=nRT=NkT,\qquad k=R/N_A$
QuantitySI unitFrequent conversion
$p$Pa1 kPa = $10^3$ Pa
$V$m³1 dm³ = $10^{-3}$ m³; 1 cm³ = $10^{-6}$ m³
$T$K$T=θ+273.15$
$n$moluse with $R=8.31$ J mol−1 K−1
$N$particlesuse with $k=1.38×10^{-23}$ J K−1

Two-state method (derived from $pV=nRT$)

  • An ideal gas is a model linking pressure, volume, temperature and particle number.
  • Choose either moles with R or individual particles with k.
  • The temperature is absolute, so it must be in kelvin.

For the same fixed sample, divide $pV=nRT$ for the two states:

$p_1V_1/T_1=p_2V_2/T_2$
Exam trap
This two-state relation is valid only when the amount of gas is unchanged. For leaking, added or transferred gas, return to $pV=nRT$ or $pV=NkT$ for each relevant system.
Explain · A fixed gas amount is heated at constant volume. Which relation applies to equilibrium states?

Your turn · Find pressure at 400 K if a fixed gas amount at fixed volume has pressure 90 kPa at 300 K.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

3

Graphs, density & combined containers

Ideal-gas straight-line graphs · fixed amount of gasIdeal-gas straight-line graphs · fixed amount of gaspVT / K0gradient = nRp1/V0gradient = nRT; fixed TUse kelvin: Celsius temperature does not give the same zero intercept.

Choose transformed axes

For fixed $n$, a $pV$–$T$ graph has gradient $nR$. At constant $T$, a $p$–$1/V$ graph has gradient $nRT$. A $p$–$V$ graph itself is a decreasing curve, not a straight line.

Density form (derived application)

With gas mass $m_g=ρV$ and $n=m_g/M$:

$pV=(ρV/M)RT\quad⇒\quad p=ρRT/M$

Connected rigid containers

  1. Find initial $n$ or $N$ in each container.
  2. Add amounts because particles are conserved.
  3. After equilibrium at common $T$, use the total rigid volume.
  4. Do not average pressures directly unless a derivation shows that it is valid for the stated volumes and temperatures.
Quick Check 1
Why can pressure fall when gas expands into an evacuated rigid container at unchanged temperature?
The same number of molecules occupies a larger total volume, so wall collisions per unit area per unit time are less frequent.
4

Kinetic model of an ideal gas

Assumptions worth marks

  • The molecular model explains pressure through momentum transfer at wall collisions.
  • For a fixed gas amount, pV/T stays constant between equilibrium states.
  • Mean molecular kinetic energy depends on temperature; it is not the total internal energy of every possible substance.
AssumptionMeaning in the model
many molecules in random motionall directions occur; bulk averages are stable
molecular volume negligiblecontainer volume approximates free gas volume
intermolecular forces negligible except during collisionsmolecules move at constant velocity between collisions
collisions perfectly elastictotal kinetic energy is conserved in collisions
collision duration negligiblemolecules spend almost all time in free flight
Newtonian mechanics appliesimpulse and momentum change determine wall force
Gas pressure arises from molecular momentum changes during collisions with the container walls. The wall experiences the equal-and-opposite impulse.
Common mistake
Ideal-gas molecules do not all have the same speed, and they do not have zero mass. The model uses a distribution of speeds and a non-zero molecular mass.
5

Deriving gas pressure

Molecular collision with a wall of a cubeA molecule with x component of velocity approaches a wall and rebounds elastically. Its x momentum changes by twice m c x. The distance between successive collisions with the same wall is two L.before: +mcₓafter: −mcₓΔpₓ = −2mcₓmagnitude 2mcₓ

One molecule in a cube of side $L$

  1. For an elastic collision with the x-wall, momentum change magnitude is $2mc_x$.
  2. Time between collisions with the same wall is $2L/c_x$.
  3. Mean force from that molecule is $(2mc_x)/(2L/c_x)=mc_x^2/L$.
  4. For many molecules, $F=(m/L)Σc_x^2$.
  5. Since wall area is $L^2$ and volume is $L^3$, $p=(m/V)Σc_x^2$.
  6. Random isotropic motion gives $Σc_x^2=(1/3)Σc^2$.
$pV=(1/3)Nm⟨c^2⟩$
Two recurring lost marks
The momentum change magnitude is $2mc_x$, not $mc_x$. The return distance to the same wall is $2L$, not $L$.
6

r.m.s. speed & molecular kinetic energy

The root-mean-square speed is $c_{rms}=√⟨c^2⟩$: square each molecular speed, average those squares, then take the square root.
$p=(1/3)ρc_{rms}^2,\qquad c_{rms}=√(3p/ρ)$

Compare the kinetic equation with $pV=NkT$:

$(1/3)Nm⟨c^2⟩=NkT\quad⇒\quad (1/2)m⟨c^2⟩=(3/2)kT$
The mean translational kinetic energy per molecule of an ideal gas is $(3/2)kT$.

Same temperature

Different ideal gases have the same mean translational kinetic energy per molecule.

Different molecular mass

At the same temperature, lighter molecules have a larger r.m.s. speed because $c_{rms}=√(3kT/m)$.
Common mistake
$c_{rms}$ is not the ordinary mean speed. In general, $√⟨c^2⟩≠⟨c⟩$.
7

Paper 4 technique & master sheet

Equation-choice routine

  1. Write all values in SI units and convert °C to K.
  2. Decide whether you know moles $n$ or particles $N$.
  3. Check whether the amount stays fixed before using a two-state ratio.
  4. For kinetic questions, distinguish molecular mass $m$ from total gas mass and molar mass $M$.
  5. Carry unrounded values and report a unit with sensible significant figures.

Master equations

Mole bridge$n=m/M$; $N=nN_A$
Ideal gas$pV=nRT=NkT$
Constant amount$p_1V_1/T_1=p_2V_2/T_2$
Constants bridge$k=R/N_A$
Density form$p=ρRT/M$
Kinetic equation$pV=(1/3)Nm⟨c^2⟩$
r.m.s. form$p=(1/3)ρc_{rms}^2$
Mean translational KE$(1/2)m⟨c^2⟩=(3/2)kT$
Common mistakes
  • Celsius in gas equations
  • cm³ or dm³ not converted
  • mixing $n,R$ with $N,k$
  • averaging pressures in unequal containers
  • losing the factor 2 or 1/3 in the derivation
  • calling r.m.s. speed the mean speed
Boundary check
Topic 15 derives mean translational kinetic energy per molecule. Questions about total internal energy or first-law signs are Topic 16.