Skip to lesson
1

Topic 22 · Quantum Physics

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

  • A photon transfers energy in a quantum E = hf.
  • Photoelectric emission requires sufficient energy in one photon to overcome the work function.
  • Intensity changes photon arrival rate; frequency changes energy per photon.
Cambridge International A Level Physics 9702

Core idea: electromagnetic radiation exchanges energy and momentum in discrete photons, while matter such as electrons can display wave behaviour.

Exact syllabus boundary
22.1 photon energy and momentum; 22.2 photoelectric effect; 22.3 wave-particle duality; 22.4 discrete energy levels and line spectra. Detailed atomic models and semiconductor bands are outside Topic 22.
Photon energy packets striking a surfaceA beam is shown as separate photon packets. Each carries energy h f and momentum E divided by c. Absorption transfers momentum p while normal reflection reverses momentum and transfers 2p.one photon: E = hfp = E/creflection: Δp = 2p
A photon is a quantum, or discrete packet, of electromagnetic energy.
$E=hf=hc/\lambda$,   $p=E/c=h/\lambda$
Quick check
Doubling frequency doubles photon energy and photon momentum. Doubling intensity at fixed frequency increases photon rate, not energy per photon.
2

Photon energy, electronvolts and photon rate

A reliable unit route

  1. Convert wavelength to metres or use frequency in hertz.
  2. Calculate one-photon energy in joules.
  3. For electronvolts, divide by $e=1.60\times10^{-19}\,\mathrm C$.
  4. For photon rate, use $N/t=P/E_{photon}$.
$1\,\mathrm{eV}=1.60\times10^{-19}\,\mathrm J$
Worked chain
For $\lambda=500\,\mathrm{nm}$, $E=hc/\lambda=3.98\times10^{-19}\,\mathrm J=2.49\,\mathrm{eV}$. A $2.0\,\mathrm{mW}$ beam therefore delivers about $5.0\times10^{15}$ photons each second.
Common mistake
A watt is joule per second. Divide power by energy per photon; do not multiply them.
3

Photon momentum and radiation force

A photon has no rest mass, but it carries momentum. A surface experiences force because photon momentum changes.

Interaction at normal incidenceMomentum change per photon
complete absorption$p=E/c$
reflection straight back$2p=2E/c$
fraction $r$ reflected, rest absorbedaverage $(1+r)p$
$F=\Delta p/\Delta t$; hence $F=P/c$ for absorption and $F=2P/c$ for normal reflection.
Vector technique
Choose the incident direction as positive. A reflected photon changes from $+p$ to $-p$, so its change has magnitude $2p$.
Exam trap
Use the power that actually reaches the surface. Intensity and power are not interchangeable unless an illuminated area is supplied.
4

Photoelectric emission

  • For emitted electrons, hf = Φ + K_max.
  • A stopping potential measures maximum kinetic energy per electron charge.
  • Discrete atomic energy changes produce particular photon frequencies, so line spectra reveal energy-level differences.
Photoelectric cell · stopping potentialPhotoelectric cell · stopping potentiallight: hfemitter (+)collector (−)Electrons leave the emitter with a range of kinetic energies.reverse supply+−At the stopping potential: eVₛ = KEmax = hf − Φ
Photoelectric emission is the release of electrons from a surface when electromagnetic radiation of sufficiently high frequency is incident on it.
$hf=\Phi+\tfrac12mv_{max}^{2}$

$\Phi$ is the work function: the minimum energy needed to remove an electron from the surface. At threshold, emitted electrons have zero maximum kinetic energy.

$\Phi=hf_0=hc/\lambda_0$,   $eV_s=KE_{max}$
ChangeIf frequency remains above threshold
increase intensitymore photons per second → larger emission rate/current; unchanged $KE_{max}$
increase frequencylarger photon energy → larger $KE_{max}$ and stopping potential
frequency below thresholdno emission, however intense the light
Explain · At fixed frequency above threshold, increasing intensity mainly increases…

Your turn · Find maximum kinetic energy in eV for photon energy 4.8 eV and work function 2.3 eV.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

5

Photoelectric graphs and practical interpretation

Photoelectric stopping-potential graphStopping potential is zero at threshold frequency and rises linearly with frequency. The gradient is Planck constant divided by electron charge.f₀fVₛgradient = h/e
$V_s=(h/e)f-\Phi/e$

On a graph of stopping potential against frequency, gradient $=h/e$ and the frequency-axis intercept is $f_0$. The vertical intercept is $-\Phi/e$ if the straight line is extended.

Current–p.d. traces

Graph trap
The stopping potential is a positive magnitude even when it is applied as a reverse potential.
6

Wave-particle duality and electron diffraction

Electron diffraction experimentAn accelerated electron beam passes through a thin crystalline target and forms diffraction rings on a fluorescent screen. A larger accelerating potential gives greater momentum and a smaller de Broglie wavelength.electron gunthin crystalλ = h/p
$\lambda=h/p$

Electron diffraction produces rings or maxima characteristic of waves. The detections still occur as localised particle events. Together these provide evidence that electrons have both wave and particle aspects.

p=mv,   $eV=\tfrac12mv^2$,   $p=\sqrt{2meV}$ for a non-relativistic electron accelerated from rest
Direction of change
Increase accelerating p.d. → greater kinetic energy → greater momentum → shorter de Broglie wavelength → smaller diffraction angles/ring spacing.
Language trap
Do not say an electron “turns into a wave”. State that its diffraction behaviour is evidence of wave properties.
7

Discrete energy levels and line spectra

Discrete energy levels and line spectraAn atom can occupy only discrete energy levels. A downward transition emits one photon whose energy equals the energy-level difference. An upward transition requires absorption of a matching photon.E₁E₂E₃E₄hf = |Eᵤ − Eₗ|emissionabsorption

Bound electrons in an atom occupy only discrete energies. A downward transition emits one photon; an upward transition occurs only if a photon supplies exactly the required energy difference.

$hf=E_{upper}-E_{lower}$ in magnitude
ObservationInterpretation
bright lines on dark backgroundemission at allowed transition energies
dark lines within a continuous spectrumabsorption of matching photon energies
unique line patterneach element has a characteristic set of levels
Common mistake
Use the magnitude of the energy difference. Negative level values are binding-energy references; photon energy is positive.
8

Paper 4 technique & master equation sheet

Five recurring routes

  1. Light data: $\lambda\leftrightarrow f\rightarrow E\rightarrow$ photon rate or momentum.
  2. Photoelectric: compare $hf$ with $\Phi$ before calculating $KE_{max}$.
  3. Graphs: write the linear form before reading gradient or intercept.
  4. Electrons: find momentum, then use $\lambda=h/p$.
  5. Spectra: identify upper and lower energies, use a positive difference, then convert to $f$ or $\lambda$.

Master equations

photon$E=hf=hc/\lambda$
electronvolt$1\,\mathrm{eV}=1.60\times10^{-19}\,\mathrm J$
photon momentum$p=E/c=h/\lambda$
photoelectric$hf=\Phi+KE_{max}$, $eV_s=KE_{max}$
threshold$\Phi=hf_0=hc/\lambda_0$
matter wavelength$\lambda=h/p$
transition$hf=|E_u-E_l|$
Final traps
  • intensity does not set photon energy
  • below threshold, intensity cannot cause emission
  • reflection transfers twice the photon momentum
  • larger electron momentum means shorter wavelength
  • absorption energy must match a level gap
Constants
$h=6.63\times10^{-34}\,\mathrm{J\,s}$, $c=3.00\times10^8\,\mathrm{m\,s^{-1}}$, $e=1.60\times10^{-19}\,\mathrm C$, $m_e=9.11\times10^{-31}\,\mathrm{kg}$.