Skip to lesson
1

Topic 23 · Nuclear Physics

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

Cambridge International A Level Physics 9702

Core idea: a bound nucleus has less mass-energy than its separated nucleons, and an unstable nucleus decays randomly with a constant probability per unit time.

Exact syllabus boundary
23.1 mass–energy, nuclear equations, binding energy, fission and fusion; 23.2 random/spontaneous decay, activity, decay constant, half-life and exponential laws. PET imaging belongs to Topic 24.

Nuclear-equation audit

For every nuclear equation, conserve total nucleon number $A$ and total proton number $Z$. Then check energy: an exothermic reaction has products with greater total binding energy and smaller total rest mass.

$E=mc^2$,   $Q=c^2\Delta m$
First move
Balance $A$ and $Z$ before using any masses. This often identifies an omitted neutron or charged product.
2

Mass defect and binding energy

  • Binding energy is the energy needed to separate a nucleus into its nucleons.
  • Mass defect links a bound system’s mass to this energy.
  • Radioactive decay describes a statistical loss of unstable nuclei over time.
Mass defect and binding energySeparated nucleons have a greater total mass and energy than the bound nucleus. The mass difference times c squared is the binding energy required to separate the nucleus.separated nucleons: larger massbound nucleus: smaller massΔm c²
Mass defect is the difference between the total mass of the separate nucleons and the mass of the bound nucleus.
Binding energy is the minimum energy required to separate a nucleus completely into its individual nucleons.
$\Delta m=Zm_p+Nm_n-m_{nucleus}$,   $E_b=\Delta mc^2$

Use nuclear masses consistently. If atomic masses are supplied, electron masses must cancel consistently in the complete nuclear reaction.

Sign trap
For a stable bound nucleus, separated nucleons have the larger mass. Write the subtraction in that order so mass defect and binding energy are positive.
3

Binding energy per nucleon

Binding energy per nucleon curveBinding energy per nucleon rises steeply for light nuclei, reaches a broad maximum near iron, then falls slowly for heavy nuclei. Fusion of light nuclei and fission of heavy nuclei can move products toward the maximum and release energy.near FefusionfissionBE/AA

Binding energy per nucleon is a measure of how tightly, on average, nucleons are bound. The broad maximum occurs near medium-mass nuclei.

$\text{binding energy per nucleon}=E_b/A$
ProcessMovement on the curveWhy energy is released
fusionlight nuclei combine and move right/upproducts have greater total binding energy
fissionheavy nucleus splits and products move left/upproducts have greater total binding energy
Calculation trap
Energy release uses the change in total binding energy. Multiply every quoted BE/A value by that nucleus’s nucleon number before subtracting.
4

Fission, fusion and energy release

Reusable Q-value route

  1. Balance nucleon and proton numbers.
  2. Calculate total binding energy before.
  3. Calculate total binding energy after.
  4. $Q=BE_{after}-BE_{before}$.
  5. Convert units only once: $1\,\mathrm{MeV}=1.60\times10^{-13}\,\mathrm J$.
  6. If requested, $\Delta m=Q/c^2$.
Meaning of a positive Q
If $Q>0$, products are more tightly bound and their total rest mass is smaller. The difference appears as kinetic energy and/or photon energy.
Common mistake
Do not subtract two BE/A numbers directly when the nuclei contain different numbers of nucleons.
5

Random and spontaneous radioactive decay

Exponential decay · equal times give equal fractionsExponential decay · equal times give equal fractions0N₀t½N₀/22t½N₀/43t½N₀/8timeAlso applies to activity and background-corrected count rate.
Random: the time at which one particular nucleus decays cannot be predicted.
Spontaneous: decay occurs without an external trigger and is unaffected by ordinary physical conditions.
$N=N_0e^{-\lambda t}$,   $A=A_0e^{-\lambda t}$,   $x=x_0e^{-\lambda t}$

$x$ may be number of nuclei, activity or a background-corrected count rate. Equal time intervals multiply the remaining quantity by the same factor.

Language trap
The decay probability per unit time is constant; the activity is not constant because the number of undecayed nuclei falls.
6

Activity, decay constant and measurement

Source and detector measurement chainA radioactive source emits in many directions. Only a fraction reaches and is recorded by the detector. The observed count rate also includes background, so background is subtracted before efficiency correction.detectoractivity Arecorded rate < A
$A=\lambda N$,   $1\,\mathrm{Bq}=1\,\mathrm{s^{-1}}$

The decay constant $\lambda$ is the probability per unit time that a nucleus decays. Its unit is the inverse of the time unit used.

From a detector reading to activity

  • Use consistent atomic or nuclear masses when finding a mass difference.
  • For decay, activity is λN; subtract background from detector readings before comparing source rates.
  • Half-life and decay constant are related by λt½ = ln 2.
  1. Convert counts in a time interval to count rate.
  2. Subtract background count rate.
  3. Correct for stated detection efficiency: $A=R_{source}/\varepsilon$.
  4. Only then use $A=\lambda N$.
Common mistake
A detector generally records only a fraction of all decays. Count rate is not automatically equal to activity.
Explain · What happens to source activity after one half-life?

7

Half-life and graph techniques

$\lambda=\ln2/t_{1/2}=0.693/t_{1/2}$

Linear graph form

$\ln x=\ln x_0-\lambda t$

A graph of $\ln x$ against $t$ is a straight line with gradient $-\lambda$ and intercept $\ln x_0$.

Graph/data formTechnique
ordinary exponential graphread two values separated by a factor of two
two activity values$\lambda=\ln(A_0/A)/t$
$\ln A$ against $t$$\lambda=-$gradient
raw detector countssubtract background before logs or ratios
Unit discipline
If $\lambda$ is in s⁻¹, every time in the exponential must be in seconds. Convert at the beginning, not halfway through.
Your turn · A source starts at 640 Bq. Find activity after four half-lives.

Decimals, scientific notation and compatible units are accepted. Keep any required sign.

8

Paper 4 technique & master equation sheet

Decision tree

  1. Nuclear equation? Conserve $A$ and $Z$.
  2. Nuclear masses? Find mass defect, then $c^2\Delta m$.
  3. BE/A data? Convert each to total BE, then compare final and initial.
  4. Sample mass? Find number of nuclei, then $A=\lambda N$.
  5. Detector data? Average, divide by time, subtract background, correct efficiency.
  6. Decay ratio? Use logarithms or number of half-lives.

Master equations

mass–energy$E=mc^2$
mass defect$\Delta m=Zm_p+Nm_n-m_{nucleus}$
binding energy$E_b=\Delta mc^2$
activity$A=\lambda N$
half-life$\lambda=0.693/t_{1/2}$
decay$x=x_0e^{-\lambda t}$
linear form$\ln x=\ln x_0-\lambda t$
Final traps
  • use total BE, not BE/A difference
  • keep mass units consistent
  • background-correct before decay ratios
  • Bq means s⁻¹
  • random timing does not mean an irregular large-sample law
Useful conversions
$1\,\mathrm u=1.66\times10^{-27}\,\mathrm{kg}$, $1\,\mathrm u\,c^2=931.5\,\mathrm{MeV}$, $1\,\mathrm{MeV}=1.60\times10^{-13}\,\mathrm J$.