1
Topic 6 · Deformation of Solids
Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
What Cambridge is really testing
Topic 6 is about connecting a force to the deformation it produces. The strongest answers move confidently between a specimen's dimensions, its force–extension graph, stress, strain, Young modulus and the energy transferred during deformation.
6.1 · Stress and strain
The deformation language
| Term | Meaning | Exam thought |
|---|---|---|
| load | The applied force that deforms the object. | A hanging mass provides load $F=mg$. |
| extension $x$ | Increase in length: $x=L-L_0$. | Do not confuse final length with extension. |
| compression | Decrease in length caused by compressive forces. | The same Hooke-law ideas apply to the magnitude of compression. |
| limit of proportionality | Point beyond which load is no longer proportional to extension. | Beyond it, the $F$–$x$ graph is no longer a straight line through the origin. |
One-dimensional deformation: in this topic the force and the change in length are treated along one line. Always identify the original length first, then find the extension or compression.
Hooke's law and spring constant
Hooke's law
Within the limit of proportionality, extension is directly proportional to applied force:
$$\boxed{F=kx}$$
so
$$\boxed{k=\frac{F}{x}}.$$
The spring constant $k$ measures the stiffness of the particular spring or specimen and has unit $\mathrm{N\,m^{-1}}$.
On an $F$–$x$ graph, the straight-line gradient is
$$\boxed{k=\frac{\Delta F}{\Delta x}}.$$
Point P marks the limit of proportionality. After P, Hooke's law no longer applies even though the material may still be elastic for some further deformation.
Common mistake
Limit of proportionality ≠ elastic limit. The first tells you when the graph stops being proportional; the second tells you whether the object fully returns to its original dimensions after unloading. Do not automatically place them at the same point.
Quick Check 1
A spring has natural length $18.0\,\mathrm{cm}$ and length $23.0\,\mathrm{cm}$ under a $10.0\,\mathrm N$ load. Find its extension and spring constant.
$x=5.0\,\mathrm{cm}=0.050\,\mathrm m$, so $k=F/x=10.0/0.050=200\,\mathrm{N\,m^{-1}}$.
2
Stress, strain and Young modulus
- StressTensile force per cross-sectional area.
- StrainExtension divided by original length.
- They let you compare materials without confusing a sample’s dimensions with its material stiffness.
- Within the linear elastic region, Young modulus is stress/strain.
- Extension is final length minus original length.
Stress
Stress is force per unit cross-sectional area:
$$\boxed{\sigma=\frac{F}{A}}$$
Unit: $\mathrm{Pa}=\mathrm{N\,m^{-2}}$.
Strain
Strain is extension divided by original length:
$$\boxed{\varepsilon=\frac{x}{L}}$$
It is a ratio and therefore has no unit. If strain is given as a percentage, divide by $100$ before using it in equations.
Young modulus
Within the proportional region,
$$\boxed{E=\frac{\text{stress}}{\text{strain}}=\frac{\sigma}{\varepsilon}}$$
and therefore
$$\boxed{E=\frac{FL}{Ax}}.$$
Young modulus is a material property. Its SI unit is the pascal.
On a stress–strain graph,
$$\boxed{E=\frac{\Delta\sigma}{\Delta\varepsilon}}.$$
Do not mix up the two gradients: $F$–$x$ gives $k$; stress–strain gives $E$.
The diameter-squared trap
Circular wires
For diameter $d$,
$$\boxed{A=\frac{\pi d^2}{4}}.$$
So doubling the diameter makes the area four times larger. For the same force, the stress becomes one quarter as large.
Exam technique · percentages and prefixes
Convert everything before substituting: $1\,\mathrm{mm}=10^{-3}\,\mathrm m$, $1\,\mathrm{mm^2}=10^{-6}\,\mathrm{m^2}$, $1\,\mathrm{MPa}=10^6\,\mathrm{Pa}$ and $0.30\%=0.0030$.
Quick Check 2
A wire of length $1.50\,\mathrm m$ extends by $0.90\,\mathrm{mm}$ under a stress of $1.20\times10^8\,\mathrm{Pa}$. Find the strain and Young modulus.
$\varepsilon=0.00090/1.50=6.0\times10^{-4}$. Then $E=\sigma/\varepsilon=(1.20\times10^8)/(6.0\times10^{-4})=2.0\times10^{11}\,\mathrm{Pa}$.
3
Current syllabus boundary
Named Topic 6 outcomes are 6.1 Stress and strain and 6.2 Elastic and plastic behaviour. Connected wires and spring combinations below are included only as transfer applications of $F=kx$ and $x=FL/(EA)$; they are not separate syllabus headings.Wire scaling & connected specimens
The master deformation equation
Rearranging $E=FL/(Ax)$ gives
$$\boxed{x=\frac{FL}{EA}}.$$
For a wire of fixed material,
$$x\propto F,\qquad x\propto L,\qquad x\propto\frac1A,\qquad x\propto\frac1{d^2}.$$
| Change | Effect on extension $x$ | Reason |
|---|---|---|
| double $F$ | $\times2$ | $x\propto F$ |
| double $L$ | $\times2$ | $x\propto L$ |
| double $A$ | $\times\tfrac12$ | $x\propto1/A$ |
| double $d$ | $\times\tfrac14$ | $A\propto d^2$ |
| double $E$ | $\times\tfrac12$ | stiffer material |
Young modulus versus spring constant
Material property vs specimen property
From $F=kx$ and $x=FL/(EA)$,
$$\boxed{k=\frac{EA}{L}}\qquad\text{and}\qquad\boxed{E=\frac{kL}{A}}.$$
$E$ belongs to the material. $k$ belongs to the particular specimen. The same material can have different $k$ values if its length or area changes.
Common mistake
If a question changes the dimensions of a steel wire, its Young modulus does not change. What changes is the specimen's extension and therefore its spring constant.
Connected wires end-to-end
For sections joined in series, the tensile force is the same through each section (when the junction is in equilibrium), but each section may extend by a different amount:
$$x_\text{total}=x_1+x_2+\cdots$$
with
$$x_i=\frac{F L_i}{E_iA_i}.$$
Connected springs
Series
Same force acts through each spring. Extensions add. For identical springs, the arrangement is softer than one spring.Parallel
The load is shared between springs. For identical springs carrying the load symmetrically, the arrangement is stiffer.You do not need to memorise a long list of spring-combination formulas. In unfamiliar diagrams, use equilibrium + $F=kx$ for each spring.
Quick Check 3
A wire extends by $2.0\,\mathrm{mm}$. A second wire of the same material carries the same force but is three times as long and twice the diameter. What is its extension?
Length gives $\times3$; doubled diameter gives area $\times4$, hence extension $\times\tfrac14$. Overall factor $3/4$, so $x=1.5\,\mathrm{mm}$.
4
Young modulus experiment
The experiment must provide four quantities:
$$F,\quad L,\quad A,\quad x.$$
Then
$$\boxed{E=\frac{FL}{Ax}}.$$
Exam-ready method
- Measure the wire's original length $L$ between the fixed point and the reference mark using a metre rule.
- Measure diameter $d$ with a micrometer screw gauge at several positions and in different orientations. Find the mean and calculate $A=\pi d^2/4$.
- Record the zero reading of the pointer/scale before adding extra load.
- Add known masses gradually. For each mass, calculate $F=mg$ and measure the extension $x$.
- Keep the measurements within the proportional region if using a straight-line gradient for Young modulus.
- Plot $F$ against $x$ and find a large-triangle gradient $k=\Delta F/\Delta x$.
- Calculate $E=kL/A$. Alternatively, plot stress against strain; then the gradient is $E$ directly.
Improving the measurement
Use a long wire so the extension is larger and the percentage uncertainty in $x$ is smaller. Average several diameter readings because $A\propto d^2$, so an error in $d$ has a strong effect. Take several load–extension pairs rather than relying on one reading.
Practical traps
- Do not use mass in kilograms as the force: convert with $F=mg$.
- Do not use the final wire length as $x$; extension is the change in length.
- Do not calculate circular area as $\pi d^2$; use $A=\pi d^2/4$.
- If the $F$–$x$ graph is not straight, do not take one overall gradient and call it $k$.
Quick Check 4
An $F$–$x$ graph for a wire has gradient $6.0\times10^3\,\mathrm{N\,m^{-1}}$. The wire has length $2.0\,\mathrm m$ and area $5.0\times10^{-8}\,\mathrm{m^2}$. Find $E$.
$E=kL/A=(6.0\times10^3)(2.0)/(5.0\times10^{-8})=2.4\times10^{11}\,\mathrm{Pa}$.
5
6.2 · Elastic and plastic behaviour
- The elastic limit concerns recovery; the limit of proportionality concerns a straight-line force–extension relationship.
Elastic deformation
When the load is removed, the object returns to its original shape and dimensions.Plastic deformation
When the load is removed, a permanent deformation remains. Elastic limit
The elastic limit is the greatest load/stress for which the deformation remains elastic. If the elastic limit is exceeded, unloading leaves a permanent extension or compression.
P can mark the end of proportional behaviour. The unloading path tells you whether the deformation is elastic. If unloading meets the extension axis at a non-zero value, that intercept is the permanent extension.
A subtle but important idea
A material can be elastic but not proportional: it may follow a curved $F$–$x$ path yet return to its original dimensions when unloaded. Hooke's law describes proportional behaviour; elasticity describes recovery after unloading.
Compression uses the same logic
A block or spring can also deform under compression. Use the magnitude of the compression as the change in length. Within the proportional region, $F=kx$ still applies and elastic deformation still means full recovery after the force is removed.
Quick Check 5
A specimen's force–extension graph curves, but when the force is removed it returns exactly to its original length. Is the deformation elastic? Does Hooke's law hold throughout?
The deformation is elastic because the original length is recovered. Hooke's law does not hold throughout because the graph is not proportional throughout.
6
Work done & elastic potential energy
Area under the force–extension graph
For any loading path,
$$\boxed{\text{work done}=\text{area under the }F\text{–}x\text{ graph}}.$$
If the material is deformed within its limit of proportionality, the graph is a straight line from the origin and
$$\boxed{E_P=\frac12Fx=\frac12kx^2}.$$
Straight-line loading
Non-linear loading
The triangle-formula trap
$\frac12Fx$ is valid only when the force–extension relation is a straight line from the origin. For a curved graph, estimate or calculate the actual area under the curve.
Energy added between two extensions
For a Hooke-law spring, if extension changes from $x_1$ to $x_2$, the extra energy stored is
$$\boxed{\Delta E_P=\frac12k\left(x_2^2-x_1^2\right)}.$$On the graph this is simply the area under the line between $x_1$ and $x_2$.
Worked example
A spring has $k=300\,\mathrm{N\,m^{-1}}$. Its extension increases from $2.0\,\mathrm{cm}$ to $5.0\,\mathrm{cm}$.
$$\Delta E_P=\frac12(300)\left(0.050^2-0.020^2\right)=0.315\,\mathrm J.$$
Notice: do not calculate $\tfrac12F\Delta x$ using only the final force. The force changes throughout the interval.
Loading and unloading as an area problem
Useful graph extension
If a question gives different loading and unloading curves, calculate the work put in from the area under the loading curve and the energy returned from the area under the unloading curve. Their difference is the net energy transferred to internal/thermal processes. This follows directly from the area rule; it is not a separate formula to memorise.
Quick Check 6
A spring has $k=500\,\mathrm{N\,m^{-1}}$. How much energy is stored at an extension of $4.0\,\mathrm{cm}$?
$E_P=\tfrac12kx^2=\tfrac12(500)(0.040)^2=0.400\,\mathrm J$.
7
Topic 6 · Exam Toolbox
The six-question decision path
- Is the diagram giving length or extension/compression?
- Is the graph $F$–$x$ or stress–strain?
- Is the deformation still proportional?
- Do I need a wire area, especially $A=\pi d^2/4$?
- Is the question asking for a material property $E$ or a specimen property $k$?
- Is energy required from a formula or from the actual graph area?
Graph selector
| Graph | Gradient | Area |
|---|---|---|
| $F$ against extension $x$ | spring constant $k$ in proportional region | work done / energy transferred |
| extension $x$ against force $F$ | gradient $=x/F=1/k$ | invert the gradient to obtain $k$ |
| stress $\sigma$ against strain $\varepsilon$ | Young modulus $E$ in proportional region | not the ordinary elastic energy unless volume is also considered |
| $F$ against total length $L$ | same numerical slope as $F$–$x$ when natural length is a constant shift | first identify $x=L-L_0$ before using energy limits |
High-value traps
- mm vs mm²: $1\,\mathrm{mm}=10^{-3}\,\mathrm m$ but $1\,\mathrm{mm^2}=10^{-6}\,\mathrm{m^2}$.
- diameter: area depends on $d^2$.
- percentage strain: convert % to a decimal.
- natural length: energy uses extension, not total spring length.
- elastic vs proportional: recovery and proportionality are different tests.
- Young modulus: changing specimen dimensions does not change the material's $E$.
- curved graph: do not force $\tfrac12Fx$ onto a non-linear curve.
Master equations
$x=L-L_0$$F=kx$$k=F/x$$\sigma=F/A$$\varepsilon=x/L$$E=\sigma/\varepsilon$$E=FL/(Ax)$$x=FL/(EA)$$k=EA/L$$E_P=\tfrac12Fx=\tfrac12kx^2$
Synthesis example · two wire sections
Two wire sections of equal area carry the same tension. Section A has length $L$ and Young modulus $2E$. Section B has length $2L$ and Young modulus $E$.
Since $x=FL/(EA)$,
$$x_A\propto\frac{L}{2E},\qquad x_B\propto\frac{2L}{E}.$$
Therefore $x_B=4x_A$, and
$$x_{\text{total}}=5x_A.$$
This is typical higher-level Topic 6 reasoning: same force, different material/dimensions, extensions add.
Final Quick Check
A wire's diameter is halved and its length is doubled. The material and tensile force stay unchanged. By what factor does its extension change?
Halving diameter makes area $1/4$, so extension becomes $\times4$. Doubling length gives another $\times2$. Total factor $=8$.
Topic 6 in one sentence
Use the geometry of the specimen to connect load with deformation, use graph gradients to distinguish $k$ from $E$, use unloading to distinguish elastic from plastic behaviour, and use the area under an $F$–$x$ graph to track work and elastic energy.