Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.
How to use this bank
32 original MCQs train the recurring techniques from the uploaded Superposition papers while staying inside the current 8.1–8.4 syllabus. 8 Structured Questions use Cambridge-style marks and worked solutions. Questions are original rather than reproductions of past-paper wording.
Multiple Choice Questions
Q1. Easy8.1
When two waves overlap, which quantity is added according to the principle of superposition?
A. frequency
B. displacement
C. wavelength
D. intensity
The resultant displacement is the algebraic/vector sum of the individual displacements at the same point.
Q2. Easy8.1
Which pair of waves can form a stable stationary-wave pattern in the same medium?
A. Same direction, equal frequency
B. Opposite directions, different frequencies
C. Same direction, different amplitudes
D. Opposite directions, same frequency and equal amplitude
A stationary wave requires opposite-going waves of the same frequency; for fixed zero-amplitude nodes in the ideal pattern, the component amplitudes are equal.
Q3. Medium8.1
Adjacent nodes of a stationary wave are $0.225\,\mathrm{m}$ apart. The frequency is $160\,\mathrm{Hz}$. What is the speed of the progressive waves?
A. $72\,\mathrm{m\,s^{-1}}$
B. $36\,\mathrm{m\,s^{-1}}$
C. $28.8\,\mathrm{m\,s^{-1}}$
D. $144\,\mathrm{m\,s^{-1}}$
$\lambda=2(0.225)=0.450\,\mathrm m$ and $v=f\lambda=160(0.450)=72\,\mathrm{m\,s^{-1}}$.
Q4. Medium8.1
Two points lie at corresponding positions in adjacent loops of a stationary wave. How do they oscillate?
A. Different frequencies and antiphase
B. Same frequency and in phase
C. Same frequency and antiphase
D. Same amplitude at all times
All points oscillate at the same frequency. Adjacent loops are in antiphase.
Q5. Easy8.1
A stationary wave is shown at an instant when one loop is at maximum upward displacement. At a node, what is the displacement?
A. Always zero
B. Maximum upward
C. Maximum downward
D. It depends on frequency
A node has zero amplitude, so its displacement is zero at all times.
Q6. Medium8.1
A microwave detector moves through a stationary pattern. Successive signal maxima are $18\,\mathrm{mm}$ apart. What is the microwave wavelength?
A. $9\,\mathrm{mm}$
B. $18\,\mathrm{mm}$
C. $72\,\mathrm{mm}$
D. $36\,\mathrm{mm}$
Adjacent maxima are adjacent antinodes, separated by $\lambda/2$. Hence $\lambda=36\,\mathrm{mm}$.
Q7. Hard8.1
The distance from node 1 to node 7 in a stationary sound wave is $0.84\,\mathrm m$. What is the wavelength?
A. $0.14\,\mathrm m$
B. $0.21\,\mathrm m$
C. $0.28\,\mathrm m$
D. $1.68\,\mathrm m$
There are 6 node-to-node intervals. $6(\lambda/2)=0.84$, so $\lambda=0.28\,\mathrm m$.
Q8. Easy8.1
Which statement best distinguishes a stationary wave from a progressive wave?
A. Every particle in a stationary wave has zero amplitude.
B. A stationary wave has fixed nodes and no net energy transfer along the pattern.
C. A stationary wave has no frequency.
D. A progressive wave cannot interfere.
A stationary pattern has fixed nodes and no net energy transfer along the pattern; particles between nodes still oscillate.
Q9. Easy8.2
Which description best defines diffraction?
A. Spreading of a wave through a gap or around an obstacle
B. Change of speed when a wave enters a new medium
C. Addition of coherent waves only
D. Separation of white light into colours
Diffraction is wave spreading through a gap or around an obstacle.
Q10. Medium8.2
Water waves of fixed wavelength pass through a gap. Which change produces greater diffraction?
A. Make the gap wider and wider
B. Reduce the gap width towards the scale of the wavelength
C. Increase wave speed without changing wavelength
D. Increase amplitude only
Diffraction becomes more significant as the gap width becomes comparable with the wavelength.
Q11. Medium8.2
Two water waves pass through equal gaps. Wave X has the longer wavelength. Which statement is correct?
A. X diffracts less
B. They diffract equally because gap widths are equal
C. X diffracts more
D. Only X can diffract
For the same gap, a larger wavelength means the gap is smaller relative to $\lambda$, so spreading is greater.
Q12. Easy8.2
Which arrangement gives the least noticeable diffraction?
A. Gap $\approx \lambda$
B. Gap slightly smaller than $\lambda$
C. Gap equal to $2\lambda$
D. Gap much larger than $\lambda$
When the gap is much larger than the wavelength, the emerging wavefronts are only weakly spread.
Q13. Easy8.3
Two sources are coherent when they have:
A. They have the same frequency and a constant phase difference
B. They have equal amplitude only
C. They have the same wavelength but random phase
D. They have equal intensity only
Coherence means same frequency and fixed phase difference.
Q14. Medium8.3
Which is NOT essential for a stable two-source interference pattern?
A. The waves overlap
B. The sources have equal amplitudes
C. The sources have the same frequency
D. The phase difference is constant
Equal amplitudes improve visibility but are not essential. Coherence and overlap are essential.
Q15. Medium8.3
Two in-phase sources have path difference $2\lambda$ to a detector. What is observed?
A. A minimum because $2\lambda$ is even
B. No interference
C. A maximum
D. The result depends only on amplitude
An integer multiple of $\lambda$ gives constructive interference for in-phase sources.
Q16. Medium8.3
For two in-phase coherent sources, which path difference gives destructive interference?
A. $2\lambda$
B. $3\lambda$
C. $4\lambda$
D. $\tfrac{5}{2}\lambda$
Half-integer multiples $(n+1/2)\lambda$ give destructive interference; $5\lambda/2$ is one.
Q17. Medium8.3
Light of wavelength $520\,\mathrm{nm}$ illuminates slits separated by $0.40\,\mathrm{mm}$. The screen is $2.0\,\mathrm m$ away. What is the fringe spacing?
For a grating, $d/\lambda=4.6$. What is the highest possible diffraction order?
A. 3
B. 4
C. 5
D. 9
Since $n\lambda\le d$, $n\le4.6$. The largest whole-number order is 4.
Q27. Medium8.4
A grating can produce orders up to $n=5$ on each side of the central beam. How many maxima are possible in total?
A. 5
B. 10
C. 11
D. 12
There are five positive, five negative and one central maximum: $2(5)+1=11$.
Q28. Hard8.4
A grating is replaced by one with more lines per metre, using the same wavelength. What generally happens?
A. More orders and smaller angles
B. Fewer orders and smaller angles
C. More orders and larger angles
D. Fewer orders and larger angles
More lines/m means smaller $d$. For fixed $n$, $\sin\theta=n\lambda/d$ increases, while the maximum possible $n$ decreases.
Q29. Hard8.4
At the same diffraction angle, third-order light of wavelength $640\,\mathrm{nm}$ coincides with fourth-order light. What is the second wavelength?
A. $480\,\mathrm{nm}$
B. $853\,\mathrm{nm}$
C. $640\,\mathrm{nm}$
D. $360\,\mathrm{nm}$
At the same angle, $n_1\lambda_1=n_2\lambda_2$. So $3(640)=4\lambda_2$, giving $480\,\mathrm{nm}$.
Q30. Hard8.4
A grating has $N$ lines per metre. For fixed order $n$, a graph of $\sin\theta$ against $\lambda$ is straight. What is its gradient?
A. $N/n$
B. $nN$
C. $1/(nN)$
D. $n/N$
$d\sin\theta=n\lambda$ and $d=1/N$, so $\sin\theta=nN\lambda$.
Q31. Medium8.4
Which measurement strategy best reduces a zero-direction error when determining wavelength with a grating?
A. Use only the central maximum
B. Use the highest intensity only
C. Measure matching $+n$ and $-n$ directions and average the angle magnitude
D. Measure slit width instead of line density
Symmetric measurements on both sides reduce sensitivity to an offset in the central direction.
Q32. Hard8.4
The measured angle between the $+3$ and $-3$ beams is $\alpha$. Which expression gives the wavelength?
A. $d\sin\alpha/3$
B. $3d\sin(\alpha/2)$
C. $d\sin(3\alpha)/2$
D. $d\sin(\alpha/2)/3$
Each third-order beam is at $\theta=\alpha/2$, so $\lambda=d\sin(\alpha/2)/3$.
Structured Questions
Marking
Each scenario is worth 10 marks. Try it on paper first, then reveal the worked solution. The solutions are learning guides, not official Cambridge mark schemes.
S1. Graphical formation of a stationary wave Hard8.110 marks
Two equal progressive waves of the same frequency travel in opposite directions along a string. The solid and dashed curves below show the resultant stationary wave at two instants when the displacement pattern is at opposite extremes.
(a) State the principle of superposition. [2]
(b) Describe the graphical method used to obtain a resultant displacement curve from the two component progressive-wave curves at one instant. [2]
(c) Explain how the diagram identifies the positions of nodes. [2]
(d) The distance between the first and fourth nodes is $0.72\,\mathrm{m}$. Determine the wavelength. [2]
(e) State the phase relationship of particles in adjacent loops. [2]
(a) When waves overlap, the resultant displacement at a point is the algebraic/vector sum of the individual displacements at that point. [2]
(b) At a chosen horizontal position, read the signed displacement of each component wave and add them; plot the sum. Repeat point by point along the wave to construct the resultant curve. [2]
(c) Nodes are positions that remain at zero displacement at both shown extremes (and therefore throughout the cycle); they are the fixed crossings of the equilibrium line. [2]
(d) From node 1 to node 4 there are three node-to-node intervals: $0.72=3(\lambda/2)$, so $\boxed{\lambda=0.48\,\mathrm{m}}$. [2]
(e) Adjacent loops oscillate in antiphase: phase difference $\pi$ rad or $180^\circ$. [2]
S2. Microwave stationary-wave experiment Medium8.110 marks
A microwave transmitter faces a metal reflector. A detector is moved along the line between them. Six successive detector minima occupy a distance of $12.5\,\mathrm{cm}$ from the first to the sixth. The microwave frequency is $6.00\,\mathrm{GHz}$.
(a) Explain how the stationary wave is formed. [2]
(b) Calculate the wavelength from the detector-minimum data. [3]
(c) Calculate the wave speed and comment on the value. [2]
(d) Explain why measuring five spacings is better than measuring one. [2]
(e) State what the detector would record at an antinode compared with a node. [1]
(a) The incident microwave is reflected from the metal plate; incident and reflected waves of the same frequency travel in opposite directions and superpose. [2]
(b) First-to-sixth minima contains five spacings. Each spacing $=12.5/5=2.50\,\mathrm{cm}=\lambda/2$, so $\lambda=5.00\,\mathrm{cm}=5.00\times10^{-2}\,\mathrm m$. [3]
(c) $v=f\lambda=(6.00\times10^9)(5.00\times10^{-2})=3.00\times10^8\,\mathrm{m\,s^{-1}}$, consistent with electromagnetic waves in air. [2]
(d) A longer measured distance reduces percentage uncertainty; divide by the number of intervals to obtain a mean spacing. [2]
(e) Larger/maximum signal at an antinode and minimum signal at a node. [1]
S3. Stretched-string pattern and wavelength Medium8.110 marks
A stationary wave on a stretched string has nodes at $x=0.00$, $0.32$, $0.64$, $0.96$ and $1.28\,\mathrm m$. The driving frequency is $75.0\,\mathrm{Hz}$.
(a) Determine the wavelength. [2]
(b) Calculate the speed of the progressive waves. [2]
(c) State the distance from a node to its nearest antinode. [1]
(d) Compare the frequency, amplitude and phase of two points at the centres of adjacent loops. [3]
(e) State two experimental quantities that must be measured to determine $\lambda$ reliably from a real string pattern. [2]
(a) Adjacent nodes are $0.32\,\mathrm m$ apart $=\lambda/2$, so $\lambda=0.64\,\mathrm m$. [2]
(d) Same frequency; at the loop centres both are antinodes so equal maximum amplitude for a symmetric pattern; adjacent loops are in antiphase. [3]
(e) Measure the positions/distance between well-defined nodes (preferably over several intervals) and count the number of node-to-node intervals. [2]
S4. Ripple-tank diffraction Medium8.210 marks
Plane water waves approach a gap of width $4.0\,\mathrm{cm}$. In run A the wavelength is $1.0\,\mathrm{cm}$; in run B it is $3.5\,\mathrm{cm}$.
(a) Define diffraction. [2]
(b) State which run gives the greater spreading and explain why. [2]
(c) Sketch or describe the emergent wavefronts for run B. [2]
(d) The wave speed is unchanged. Explain what change to frequency would produce run B from run A. [2]
(e) State one way to make the diffraction in run A more noticeable without changing wavelength. [2]
(a) Diffraction is the spreading of a wave as it passes through a gap or around an obstacle. [2]
(b) Run B; its wavelength is much closer to the gap width, so the emergent wave spreads more strongly. [2]
(c) Draw/describe strongly curved, approximately semicircular wavefronts emerging from the gap. [2]
(d) Since $v=f\lambda$ and $v$ is constant, increasing $\lambda$ requires decreasing $f$. [2]
(e) Reduce the gap width towards the scale of $1.0\,\mathrm{cm}$. [2]
S5. Two-source sound interference Hard8.310 marks
Two small loudspeakers S1 and S2 are driven in phase at $680\,\mathrm{Hz}$. The speed of sound is $340\,\mathrm{m\,s^{-1}}$. At point P the path lengths are $2.40\,\mathrm m$ and $2.65\,\mathrm m$.
(a) Define coherent sources. [2]
(b) Calculate the sound wavelength. [2]
(c) Determine the path difference at P. [1]
(d) State whether P is a maximum or minimum and justify using path difference. [3]
(e) Explain why making one loudspeaker slightly quieter does not destroy the interference pattern. [2]
(a) Same frequency and constant phase difference. [2]
(b) $\lambda=v/f=340/680=0.500\,\mathrm m$. [2]
(c) $\Delta r=2.65-2.40=0.25\,\mathrm m$. [1]
(d) $0.25\,\mathrm m=\lambda/2$, a half-integer multiple of $\lambda$, so the in-phase sources arrive in antiphase and give a minimum. [3]
(e) Coherence is unchanged; the waves still have fixed phase relation and overlap. Unequal amplitudes make the minimum less deep but do not remove interference. [2]
S6. Young double-slit data and scaling Hard8.310 marks
A laser illuminates slits separated by $0.60\,\mathrm{mm}$. The screen is $2.40\,\mathrm m$ from the slits. The distance across 12 adjacent fringe spacings is $28.8\,\mathrm{mm}$.
(a) Calculate the mean fringe spacing $x$. [2]
(b) Calculate the wavelength of the laser. [3]
(c) State why measuring many fringe spacings is preferable. [1]
(d) Predict the new fringe spacing if $D$ is reduced by 25% and $a$ is increased by 20%, with wavelength unchanged. [3]
(e) State what happens to fringe spacing if only light intensity is increased. [1]
(c) It reduces percentage uncertainty in the distance measurement. [1]
(d) $x_2/x_1=(0.75)/(1.20)=0.625$, so $x_2=0.625(2.40)=1.50\,\mathrm{mm}$. [3]
(e) Spacing is unchanged. [1]
S7. Diffraction grating wavelength experiment Medium8.410 marks
A grating is marked $400$ lines per mm. A monochromatic beam is incident normally. The angle from the central beam to each first-order maximum is $13.9^\circ$.
(a) Calculate the grating spacing $d$. [2]
(b) Calculate the wavelength. [3]
(c) Describe how the measurements could be taken using the $+1$ and $-1$ orders to improve reliability. [2]
(d) Explain why the order number must be identified. [1]
(e) State two quantities, other than $d$, needed to calculate wavelength from the grating equation. [2]
(a) $N=400\times10^3=4.00\times10^5\,\mathrm{m^{-1}}$ and $d=1/N=2.50\times10^{-6}\,\mathrm m$. [2]
(c) Measure the directions to both first-order beams relative to the central direction; use half the total angular separation or average the two angle magnitudes. [2]
(d) Because $\lambda=d\sin\theta/n$ depends directly on $n$. [1]
(e) The diffraction angle $\theta$ and order number $n$. [2]
S8. Grating analysis: symmetric angles and maximum order Hard8.410 marks
A grating has $600$ lines per mm. The angle between the two second-order beams for monochromatic light is $74.0^\circ$.
(a) Calculate $d$. [2]
(b) State the diffraction angle $\theta$ for one second-order beam. [1]
(c) Calculate the wavelength. [3]
(d) Determine the highest possible order for this wavelength. [2]
(e) Hence determine the maximum total number of principal maxima. [2]
(a) $N=600\times10^3=6.00\times10^5\,\mathrm{m^{-1}}$, so $d=1.667\times10^{-6}\,\mathrm m$. [2]