Skip to lesson
P

Topic 9 Practice · Electricity

Gravity in calculations: use g = 9.81 m/s² (9.81 N/kg) near Earth, unless the question or activity supplies a different value. Keep the supplied value throughout the calculation.

How to use this bank
32 original MCQs train the recurring Topic 9 techniques found in the uploaded electricity papers while staying inside 9.1–9.3. 8 Structured Questions use Cambridge-style marks and worked solutions. The questions are original rather than reproductions of past-paper wording.
Topic separation
This bank deliberately excludes e.m.f./internal resistance, Kirchhoff's laws, combined-resistor networks and potential dividers. Those are kept for Topic 10 D.C. circuits.

Multiple Choice Questions

Q1. Easy9.1
A current of $4.8\,\mathrm{mA}$ flows for $25\,\mathrm s$. What charge passes a point?
device current 4.8 mA time 25 s
  • A. $0.012\,\mathrm C$
  • B. $0.12\,\mathrm C$
  • C. $1.2\,\mathrm C$
  • D. $120\,\mathrm C$
Convert $4.8\,\mathrm{mA}=4.8\times10^{-3}\,\mathrm A$. Then $Q=It=(4.8\times10^{-3})(25)=0.12\,\mathrm C$. Answer: B.
Q2. Medium9.1
A current decreases uniformly from $0.20\,\mathrm A$ to $0.08\,\mathrm A$ in $6.0\,\mathrm s$. What charge is transferred?
tI
  • A. $0.48\,\mathrm C$
  • B. $0.72\,\mathrm C$
  • C. $0.84\,\mathrm C$
  • D. $1.20\,\mathrm C$
The area under the $I$–$t$ graph is a trapezium: $Q=\tfrac12(0.20+0.08)(6.0)=0.84\,\mathrm C$. Answer: C.
Q3. Easy9.1
How many electrons have a total charge magnitude of $3.2\times10^{-3}\,\mathrm C$?
e⁻ total charge magnitude = 3.2 × 10⁻³ C How many elementary charges?
  • A. $2.0\times10^{16}$
  • B. $5.0\times10^{15}$
  • C. $2.0\times10^{19}$
  • D. $5.0\times10^{21}$
$N=Q/e=(3.2\times10^{-3})/(1.60\times10^{-19})=2.0\times10^{16}$. Answer: A.
Q4. Medium9.1
Which charge could be carried by an isolated object if charge is quantised in units of $e=1.60\times10^{-19}\,\mathrm C$?
charge occurs in packets of e = 1.60 × 10⁻¹⁹ C e e e Q = N e
  • A. $2.4\times10^{-19}\,\mathrm C$
  • B. $3.0\times10^{-19}\,\mathrm C$
  • C. $4.0\times10^{-19}\,\mathrm C$
  • D. $4.8\times10^{-19}\,\mathrm C$
$4.8\times10^{-19}\,\mathrm C=3e$, an integer multiple of the elementary charge. Answer: D.
Q5. Hard9.1
A conductor has $n=8.0\times10^{28}\,\mathrm{m^{-3}}$, area $0.50\,\mathrm{mm^2}$ and electron drift speed $2.0\times10^{-4}\,\mathrm{m\,s^{-1}}$. What current does it carry?
−−−−−−−− conventional current I electron drift velocity v area A
  • A. $0.128\,\mathrm A$
  • B. $1.28\,\mathrm A$
  • C. $12.8\,\mathrm A$
  • D. $128\,\mathrm A$
Use $A=0.50\times10^{-6}\,\mathrm{m^2}$ and $I=Anve$. This gives $I=1.28\,\mathrm A$. Answer: B.
Q6. Medium9.1
A wire carries a fixed current. Its diameter is doubled while $n$ and $q$ are unchanged. What happens to the drift speed?
same current I diameter d same current I diameter 2d
  • A. It doubles.
  • B. It halves.
  • C. It becomes one quarter.
  • D. It becomes four times larger.
Doubling diameter makes cross-sectional area four times larger. Since $v=I/(Anq)$ for fixed $I$, the drift speed becomes one quarter. Answer: C.
Q7. Easy9.1
In a metal wire, which statement about conventional current and electron drift is correct?
conventional current → electron drift direction ?
  • A. They are in opposite directions.
  • B. They are always in the same direction.
  • C. Electrons do not move when current flows.
  • D. Conventional current is defined in the direction of negative charge flow.
Conventional current is the direction positive charge would move, so electron drift in a metal is opposite. Answer: A.
Q8. Medium9.1
The current pulse shown is triangular, rising from zero to $0.30\,\mathrm A$ and returning to zero over $4.0\,\mathrm s$. What charge passes?
4.0 s0.30 AtI
  • A. $0.15\,\mathrm C$
  • B. $0.30\,\mathrm C$
  • C. $1.20\,\mathrm C$
  • D. $0.60\,\mathrm C$
Charge is the triangular area: $Q=\tfrac12(4.0)(0.30)=0.60\,\mathrm C$. Answer: D.
Q9. Medium9.1
A current of $2.4\,\mathrm A$ in a metal corresponds to approximately how many electrons passing a cross-section each second?
I = 2.4 A electrons crossing section each second
  • A. $3.8\times10^{18}$
  • B. $6.7\times10^{18}$
  • C. $1.5\times10^{19}$
  • D. $3.0\times10^{19}$
$N/t=I/e=2.4/(1.60\times10^{-19})=1.5\times10^{19}\,\mathrm{s^{-1}}$. Answer: C.
Q10. Medium9.1
Two wires contain the same carrier density and carriers with the same charge and drift speed. Wire X has half the cross-sectional area of wire Y. What is $I_X/I_Y$?
wire X area A/2 wire Y area A
  • A. $1/4$
  • B. $1/2$
  • C. $2$
  • D. $4$
From $I=Anvq$, current is proportional to area when $n,v,q$ are fixed, so $I_X/I_Y=1/2$. Answer: B.
Q11. Easy9.2
A component transfers $15\,\mathrm J$ of energy when $2.5\,\mathrm C$ passes through it. What is the p.d. across it?
component energy transferred = 15 J charge = 2.5 C
  • A. $6.0\,\mathrm V$
  • B. $17.5\,\mathrm V$
  • C. $37.5\,\mathrm V$
  • D. $0.17\,\mathrm V$
$V=W/Q=15/2.5=6.0\,\mathrm V$. Answer: A.
Q12. Easy9.2
A device operates at $12\,\mathrm V$ and draws $0.50\,\mathrm A$. What is its power?
device p.d. = 12 V current = 0.50 A
  • A. $0.042\,\mathrm W$
  • B. $0.50\,\mathrm W$
  • C. $24\,\mathrm W$
  • D. $6.0\,\mathrm W$
$P=VI=(12)(0.50)=6.0\,\mathrm W$. Answer: D.
Q13. Medium9.2
A current of $2.0\,\mathrm A$ flows through an $8.0\,\Omega$ resistor. What power is dissipated?
resistor current = 2.0 A R = 8.0 Ω
  • A. $4.0\,\mathrm W$
  • B. $16\,\mathrm W$
  • C. $32\,\mathrm W$
  • D. $64\,\mathrm W$
$P=I^2R=(2.0)^2(8.0)=32\,\mathrm W$. Answer: C.
Q14. Medium9.2
A $12\,\Omega$ resistor is connected across $6.0\,\mathrm V$. What power is dissipated?
resistor p.d. = 6.0 V R = 12 Ω
  • A. $0.50\,\mathrm W$
  • B. $3.0\,\mathrm W$
  • C. $6.0\,\mathrm W$
  • D. $72\,\mathrm W$
$P=V^2/R=36/12=3.0\,\mathrm W$. Answer: B.
Q15. Easy9.2
A device transfers energy at $24\,\mathrm W$ for $5.0\,\mathrm{min}$. How much energy is transferred?
device power = 24 W time = 5.0 min
  • A. $7.2\times10^3\,\mathrm J$
  • B. $120\,\mathrm J$
  • C. $4.8\,\mathrm J$
  • D. $1.2\times10^5\,\mathrm J$
Time $=300\,\mathrm s$. $W=Pt=24\times300=7.2\times10^3\,\mathrm J$. Answer: A.
Q16. Easy9.2
A charge of $0.40\,\mathrm C$ gains $3.2\,\mathrm J$ of energy. What is the potential difference?
component energy gain = 3.2 J charge = 0.40 C
  • A. $0.125\,\mathrm V$
  • B. $1.28\,\mathrm V$
  • C. $12.8\,\mathrm V$
  • D. $8.0\,\mathrm V$
$V=W/Q=3.2/0.40=8.0\,\mathrm V$. Answer: D.
Q17. Medium9.2
The resistance of a component is constant. Its p.d. is doubled. By what factor does its power change?
R, p.d. Vsame R, p.d. 2V compare power
  • A. $1/2$
  • B. $2$
  • C. $4$
  • D. $8$
For constant $R$, $P=V^2/R$. Doubling $V$ makes $P$ four times larger. Answer: C.
Q18. Medium9.2
A $9.0\,\mathrm V$ component transfers $540\,\mathrm J$ in $2.0\,\mathrm{min}$. What average current flows?
component p.d. = 9.0 V 540 J in 2.0 min
  • A. $0.25\,\mathrm A$
  • B. $0.50\,\mathrm A$
  • C. $1.0\,\mathrm A$
  • D. $5.0\,\mathrm A$
$Q=W/V=540/9=60\,\mathrm C$. Over $120\,\mathrm s$, $I=Q/t=0.50\,\mathrm A$. Answer: B.
Q19. Easy9.3
A component has $V=10\,\mathrm V$ and $I=0.25\,\mathrm A$. What is its resistance at this operating point?
component V = 10 V I = 0.25 A
  • A. $40\,\Omega$
  • B. $2.5\,\Omega$
  • C. $10.25\,\Omega$
  • D. $0.025\,\Omega$
$R=V/I=10/0.25=40\,\Omega$. Answer: A.
Q20. Easy9.3
Which is a correct statement of Ohm's law?
A V physical conditions held constant
  • A. The resistance of every component is constant.
  • B. The potential difference always equals current times a constant.
  • C. Current is proportional to resistance.
  • D. Current is directly proportional to p.d. provided physical conditions remain constant.
Ohm's law requires constant physical conditions, especially temperature. Answer: D.
Q21. Medium9.3
An $I$–$V$ graph for a resistor is a straight line through the origin with gradient $0.20\,\mathrm{A\,V^{-1}}$. What is its resistance?
VIgradient 0.20 A V⁻¹
  • A. $0.20\,\Omega$
  • B. $2.0\,\Omega$
  • C. $5.0\,\Omega$
  • D. $20\,\Omega$
For $I$ plotted against $V$, gradient $=I/V=1/R$. Hence $R=1/0.20=5.0\,\Omega$. Answer: C.
Q22. Medium9.3
A filament lamp carries $0.30\,\mathrm A$ at $6.0\,\mathrm V$. What is its resistance at this operating point?
6 V, 0.30 AVI
  • A. $0.050\,\Omega$
  • B. $20\,\Omega$
  • C. $1.8\,\Omega$
  • D. $180\,\Omega$
$R=V/I=6.0/0.30=20\,\Omega$. Answer: B.
Q23. Easy9.3
Which description best matches the I–V characteristic of a semiconductor diode?
VI
  • A. Very small current for one polarity and a rapid current increase for the conducting polarity.
  • B. A straight line through the origin for both polarities.
  • C. A symmetrical curve that becomes less steep as current increases.
  • D. Resistance is independent of polarity and temperature.
A diode conducts strongly in one direction and has very small current in the opposite direction over the normal range. Answer: A.
Q24. Medium9.3
Why does the resistance of a filament lamp increase as current increases?
filament lamp carrying increasing current consider what happens to the filament temperature
  • A. The electron charge becomes smaller.
  • B. The filament length becomes zero.
  • C. The number of electrons in the metal becomes zero.
  • D. The filament heats up, increasing lattice vibration and electron collisions.
Higher current heats the filament. Greater lattice vibration causes more collisions, so resistance increases. Answer: D.
Q25. Medium9.3
A wire has $\rho=1.5\times10^{-6}\,\Omega\,\mathrm m$, length $2.0\,\mathrm m$ and area $0.50\,\mathrm{mm^2}$. What is its resistance?
length L dA = πd²/4
  • A. $0.60\,\Omega$
  • B. $3.0\,\Omega$
  • C. $6.0\,\Omega$
  • D. $60\,\Omega$
Area $=0.50\times10^{-6}\,\mathrm{m^2}$. $R=\rho L/A=(1.5\times10^{-6})(2.0)/(0.50\times10^{-6})=6.0\,\Omega$. Answer: C.
Q26. Hard9.3
A wire is replaced by one of the same material with twice the length and half the diameter. What is $R_{new}/R_{old}$?
original length L, diameter d replacement length 2L, diameter d/2
  • A. $2$
  • B. $8$
  • C. $4$
  • D. $16$
$R\propto L/d^2$. Therefore $R_{new}/R_{old}=2/(1/2)^2=8$. Answer: B.
Q27. Hard9.3
A soft conducting wire is stretched to twice its length without changing volume or resistivity. What is its new resistance?
before stretching length L, area A after stretching length 2L, constant volume
  • A. $4R$
  • B. $2R$
  • C. $R/2$
  • D. $R/4$
Constant volume means $AL$ is constant. Doubling $L$ halves $A$, so $R\propto L/A$ increases by $2\times2=4$. Answer: A.
Q28. Hard9.3
A graph of resistance $R$ against length $L$ for a uniform wire has gradient $4.0\,\Omega\,\mathrm{m^{-1}}$. The wire area is $0.25\,\mathrm{mm^2}$. What is its resistivity?
LRgradient = ρ/A
  • A. $1.6\times10^{-5}\,\Omega\,\mathrm m$
  • B. $4.0\times10^{-6}\,\Omega\,\mathrm m$
  • C. $6.25\times10^{-8}\,\Omega\,\mathrm m$
  • D. $1.0\times10^{-6}\,\Omega\,\mathrm m$
Gradient $=\rho/A$. Thus $\rho=(4.0)(0.25\times10^{-6})=1.0\times10^{-6}\,\Omega\,\mathrm m$. Answer: D.
Q29. Medium9.3
Two wires are made of the same material and have the same length. Wire X has diameter $d$ and wire Y has diameter $2d$. What is $R_X/R_Y$?
wire X diameter d wire Y diameter 2d
  • A. $1/4$
  • B. $1/2$
  • C. $4$
  • D. $2$
Area is proportional to $d^2$, so wire Y has four times the area and one quarter the resistance. Therefore $R_X/R_Y=4$. Answer: C.
Q30. Easy9.3
What happens to the resistance of an LDR when light intensity increases?
light intensityR
  • A. It increases.
  • B. It decreases.
  • C. It stays exactly constant.
  • D. It first increases then becomes infinite.
For an LDR, increasing light intensity decreases resistance. Answer: B.
Q31. Easy9.3
What happens to the resistance of an NTC thermistor when its temperature increases?
temperatureR
  • A. It decreases.
  • B. It increases.
  • C. It is unaffected by temperature.
  • D. It becomes exactly zero.
NTC means negative temperature coefficient: resistance decreases as temperature increases. Answer: A.
Q32. Hard9.3
At one point on a curved $I$–$V$ graph, $V=4.0\,\mathrm V$ and $I=0.20\,\mathrm A$. What is the resistance at that point?
V I 4.0 V 0.20 A
  • A. $0.050\,\Omega$
  • B. $0.80\,\Omega$
  • C. $5.0\,\Omega$
  • D. $20\,\Omega$
Operating-point resistance is $R=V/I=4.0/0.20=20\,\Omega$. A tangent gradient is not required for this calculation. Answer: D.

Structured Questions

S1. Current, charge and quantisation Medium9.110 marks
The current through a component follows the graph shown. From $0$ to $2.0\,\mathrm s$ the current is $0.20\,\mathrm A$. From $2.0$ to $6.0\,\mathrm s$ it decreases uniformly to $0.05\,\mathrm A$.
2.0 s6.0 s0.20 A0.05 AtI
  • (a) State what is meant by electric current. [1]
  • (b) Calculate the charge transferred in the first $2.0\,\mathrm s$. [1]
  • (c) Calculate the charge transferred from $2.0$ to $6.0\,\mathrm s$. [2]
  • (d) Hence find the total charge transferred in $6.0\,\mathrm s$. [1]
  • (e) Calculate the number of electrons corresponding to this total charge. [2]
  • (f) Explain what is meant by saying charge is quantised. [2]
  • (g) State the relation between electron drift direction and conventional current in a metal. [1]
(a) Electric current is a flow of charge carriers / rate of flow of charge. [1]

(b) $Q=(0.20)(2.0)=0.40\,\mathrm C$. [1]

(c) Trapezium area $=\tfrac12(0.20+0.05)(4.0)=0.50\,\mathrm C$. [2]

(d) $Q_{total}=0.40+0.50=0.90\,\mathrm C$. [1]

(e) $N=Q/e=0.90/(1.60\times10^{-19})=5.6\times10^{18}$ electrons. [2]

(f) Charge exists in discrete packets / integer multiples of the elementary charge $e$. [2]

(g) Electron drift is opposite to conventional current. [1]
S2. Deriving and using the drift-current equation Hard9.110 marks
A metal wire contains free electrons of number density $8.5\times10^{28}\,\mathrm{m^{-3}}$. It has diameter $1.20\,\mathrm{mm}$ and carries current $3.0\,\mathrm A$.
−−−−−−−− conventional current I electron drift velocity v area A
  • (a) Starting from the carriers that pass a cross-section in time $t$, derive $I=Anvq$. [4]
  • (b) Calculate the mean drift speed of the electrons. [3]
  • (c) A second wire of the same material and half the diameter carries the same current. Calculate its drift speed. [2]
  • (d) Explain why the sign of electron charge does not make the current magnitude negative in your calculation. [1]
(a) In time $t$, carriers move distance $vt$; volume passing is $Avt$; number of carriers is $nAvt$; charge is $Q=nAvtq$; therefore $I=Q/t=Anvq$. Award up to [4].

(b) $A=\pi(0.60\times10^{-3})^2=1.13\times10^{-6}\,\mathrm{m^2}$. $v=I/(Ane)=3.0/[(1.13\times10^{-6})(8.5\times10^{28})(1.60\times10^{-19})]=1.95\times10^{-4}\,\mathrm{m\,s^{-1}}$. [3]

(c) Half the diameter means quarter the area, so the drift speed is four times larger: $7.8\times10^{-4}\,\mathrm{m\,s^{-1}}$. [2]

(d) The equation is being used for magnitudes; use $q=e$ as the magnitude of the electron charge, while direction is treated separately. [1]
S3. Potential difference, power and energy Medium9.210 marks
A heating element has resistance $12\,\Omega$ and is connected across a constant p.d. of $24\,\mathrm V$.
heater constant p.d. = 24 V R = 12 Ω
  • (a) Define potential difference across a component. [2]
  • (b) Calculate the current in the element. [1]
  • (c) Calculate its power. [1]
  • (d) Calculate the energy transferred in $6.0\,\mathrm{min}$. [2]
  • (e) Calculate the charge that passes in this time. [1]
  • (f) Use your answers to verify that $V=W/Q$. [1]
  • (g) The p.d. is reduced to $18\,\mathrm V$ and resistance is assumed unchanged. Calculate the new power. [2]
(a) Potential difference is energy transferred per unit charge. [2]

(b) $I=V/R=24/12=2.0\,\mathrm A$. [1]

(c) $P=VI=48\,\mathrm W$. [1]

(d) $t=360\,\mathrm s$; $W=Pt=(48)(360)=1.728\times10^4\,\mathrm J$. [2]

(e) $Q=It=(2.0)(360)=720\,\mathrm C$. [1]

(f) $W/Q=17280/720=24\,\mathrm{J\,C^{-1}}=24\,\mathrm V$. [1]

(g) $P=V^2/R=18^2/12=27\,\mathrm W$. [2]
S4. Filament-lamp I–V characteristic Hard9.310 marks
The graph shows the I–V characteristic of a filament lamp. Two marked operating points are approximately $(4.0\,\mathrm V,0.30\,\mathrm A)$ and $(8.0\,\mathrm V,0.46\,\mathrm A)$.
4 V, 0.30 A8 V, 0.46 A V / VI / A
  • (a) Calculate the resistance at $4.0\,\mathrm V$. [2]
  • (b) Calculate the resistance at $8.0\,\mathrm V$. [2]
  • (c) State how the resistance changes as current increases. [1]
  • (d) Explain this change in resistance in terms of the metal lattice. [2]
  • (e) A constant-temperature resistor has the same resistance as the lamp at $4.0\,\mathrm V$. Describe the straight line that would represent it on the same $I$–$V$ axes. [2]
  • (f) Explain why the resistance of the lamp at a point is found from $V/I$, not by simply taking the tangent gradient of this $I$–$V$ curve. [1]
(a) $R=V/I=4.0/0.30=13.3\,\Omega$. [2]

(b) $R=8.0/0.46=17.4\,\Omega$. [2]

(c) Resistance increases. [1]

(d) Larger current heats the filament; ions vibrate more strongly; electron collisions become more frequent, increasing resistance. [2]

(e) A straight line through the origin and the point $(4.0\,\mathrm V,0.30\,\mathrm A)$; for $I$ against $V$, gradient $=I/V=1/R$. [2]

(f) The resistance at the operating point is defined by the coordinate ratio $V/I$; a tangent gradient represents a local change ratio, not $V/I$. [1]
S5. Resistivity and wire dimensions Hard9.310 marks
A uniform wire has resistivity $4.8\times10^{-7}\,\Omega\,\mathrm m$, length $3.0\,\mathrm m$ and diameter $0.60\,\mathrm{mm}$.
length L dA = πd²/4
  • (a) Calculate its cross-sectional area. [2]
  • (b) Calculate its resistance. [2]
  • (c) A second wire of the same material has length $1.5\,\mathrm m$ and diameter $0.30\,\mathrm{mm}$. Calculate its resistance. [2]
  • (d) The same p.d. is applied to both wires. State the ratio $I_2/I_1$. [1]
  • (e) State the ratio $P_2/P_1$ for the same p.d. [1]
  • (f) State the two geometrical quantities that must be measured, in addition to resistance, to determine resistivity of a uniform wire. [2]
(a) $A=\pi(0.30\times10^{-3})^2=2.83\times10^{-7}\,\mathrm{m^2}$. [2]

(b) $R=\rho L/A=(4.8\times10^{-7})(3.0)/(2.83\times10^{-7})=5.09\,\Omega$. [2]

(c) Relative to wire 1: $R_2/R_1=(1.5/3.0)(0.60/0.30)^2=2.0$, so $R_2\approx10.2\,\Omega$. [2]

(d) At the same p.d., $I\propto1/R$, so $I_2/I_1=1/2$. [1]

(e) At the same p.d., $P=V^2/R$, so $P_2/P_1=1/2$. [1]

(f) Length and cross-sectional area (normally obtained from diameter). [2]
S6. Determining resistivity from a graph Hard9.310 marks
A student measures the resistance of different lengths of the same uniform wire. A graph of $R$ against $L$ is straight. Its gradient is $3.6\,\Omega\,\mathrm{m^{-1}}$. The mean wire diameter is $0.40\,\mathrm{mm}$.
LRgradient = ρ/A
  • (a) State how the resistance of each chosen length can be obtained from measured p.d. and current. [1]
  • (b) Explain why the diameter should be measured at several positions and in more than one orientation. [2]
  • (c) Show how the graph gradient is related to $\rho$ and $A$. [2]
  • (d) Calculate the resistivity of the wire. [2]
  • (e) Explain why the current should be kept small or switched off between readings. [2]
  • (f) Suggest what a small positive $R$ intercept at $L=0$ could represent. [1]
(a) $R=V/I$. [1]

(b) Repeated measurements reduce random error and reveal/average non-uniform or non-circular diameter. [2]

(c) $R=(\rho/A)L$, so gradient $=\rho/A$. [2]

(d) $A=\pi(0.20\times10^{-3})^2=1.257\times10^{-7}\,\mathrm{m^2}$. Hence $\rho=(3.6)(1.257\times10^{-7})=4.52\times10^{-7}\,\Omega\,\mathrm m$. [2]

(e) Heating would change the wire temperature and therefore its resistance/resistivity. [2]

(f) Lead/contact resistance or an instrument offset. [1]
S7. LDR and NTC thermistor behaviour Medium9.310 marks
An LDR and an NTC thermistor are tested separately using a fixed $6.0\,\mathrm V$ p.d. across each component.
LDRlight intensityR NTC thermistortemperatureR
  • (a) State how LDR resistance changes as light intensity increases. [1]
  • (b) State how NTC thermistor resistance changes as temperature increases. [1]
  • (c) The LDR resistance changes from $12\,\mathrm{k}\Omega$ to $3.0\,\mathrm{k}\Omega$. Calculate the current before and after the change. [2]
  • (d) Calculate the power dissipated by the LDR at $3.0\,\mathrm{k}\Omega$. [2]
  • (e) A thermistor falls from $5.0\,\mathrm{k}\Omega$ to $2.0\,\mathrm{k}\Omega$ at fixed p.d. By what factor does its current increase? [1]
  • (f) On a graph of resistance against the controlling variable, state the direction of slope for each device. [2]
  • (g) Explain why the controlling variable must be stated when describing either sensor. [1]
(a) LDR resistance decreases as light intensity increases. [1]

(b) NTC thermistor resistance decreases as temperature increases. [1]

(c) $I_1=6.0/(12\times10^3)=0.50\,\mathrm{mA}$; $I_2=6.0/(3.0\times10^3)=2.0\,\mathrm{mA}$. [2]

(d) $P=V^2/R=36/3000=0.012\,\mathrm W=12\,\mathrm{mW}$. [2]

(e) At fixed $V$, $I\propto1/R$, so factor $=5.0/2.0=2.5$. [1]

(f) Both $R$–light and $R$–temperature graphs slope downward. [2]

(g) LDR resistance responds to light intensity whereas NTC thermistor resistance responds to temperature; “resistance decreases” alone does not identify what was changed. [1]
S8. Constant-volume stretching and electrical power Hard9.2/9.310 marks
A soft metal wire initially has length $L$, cross-sectional area $A$ and resistance $R$. It is stretched uniformly to length $1.5L$. Its volume and resistivity are assumed unchanged.
initial: L, A, Rstretched: 1.5Lvolume constant
  • (a) Determine the new area in terms of $A$. [2]
  • (b) Determine the new resistance in terms of $R$. [2]
  • (c) Determine the new diameter as a fraction of the original diameter. [2]
  • (d) At the same p.d., determine $I_{new}/I_{old}$. [1]
  • (e) At the same p.d., determine $P_{new}/P_{old}$. [1]
  • (f) If instead the same current is maintained, determine $P_{new}/P_{old}$. [1]
  • (g) State one assumption behind treating $\rho$ as unchanged. [1]
(a) Constant volume: $A L=A_{new}(1.5L)$, so $A_{new}=A/1.5=2A/3$. [2]

(b) $R\propto L/A$, so $R_{new}/R=(1.5)/(2/3)=2.25$. Hence $R_{new}=2.25R$. [2]

(c) Since $A\propto d^2$, $d_{new}/d=\sqrt{2/3}=0.816$. [2]

(d) At fixed p.d., $I\propto1/R$, so $I_{new}/I_{old}=1/2.25=0.444$. [1]

(e) At fixed p.d., $P=V^2/R$, so $P_{new}/P_{old}=0.444$. [1]

(f) At fixed current, $P=I^2R$, so $P_{new}/P_{old}=2.25$. [1]

(g) The material and temperature must remain effectively unchanged (no significant heating or structural change that alters resistivity). [1]