WONDER — The Mystery
The Falling Object That Stops Speeding Up
A skydiver keeps falling but eventually has almost constant speed. Gravity still acts. What changes during the fall, and why does opening a parachute make the skydiver slow down?
Core model: a falling object in still air; gravity and upward air resistance act. Ignore buoyancy. Use g = 9.8 m/s² in numerical questions and take downward as positive. The syllabus requires a qualitative account of increasing drag and terminal velocity. The lab’s linear drag law is an illustrative enrichment model, not a required quantitative drag law.
Today’s Mission: connect force balance with acceleration and velocity, read a drag–speed graph, and audit a parachute explanation.
PREDICT — Commit to Your Answer
DOK 2 — PredictA skydiver is released from rest into still air. Before terminal speed, drag increases with downward speed. What happens to the downward acceleration as the skydiver speeds up?
Choose the acceleration trend during this part of the fall.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction: B) downward acceleration decreases toward zero.
At release, speed and drag are zero in this model, so acceleration is g. As speed grows, upward drag grows while weight stays constant. The downward net force and acceleration shrink, even though the object continues speeding up. At terminal velocity the two forces balance, so acceleration is zero and downward velocity is constant.
The correct WHY compares forces. Acceleration is a rate of change of velocity; it is not the speed itself.
▶ PLAY — Drag and Force Balance Lab
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: choose mass, starting speed and either a drag coefficient or a target terminal speed. Play or step through the full record.
- • OBSERVE: weight, drag, net force, acceleration and velocity share one clock. Compare a start below, at and above the balancing speed.
- • DISCOVER: open or close the illustrative parachute during a run. Velocity stays continuous while forces and acceleration change immediately.
Downward is positive, g = 9.8 m/s², and buoyancy is ignored. Illustrative linear model: upward drag D = kv for downward v ≥ 0. Real drag need not be linear. The plots are time records with no ground or impact; the force scene is schematic. Ordinary setting changes start a new run; parachute changes retain velocity and history. A finite run from rest approaches terminal speed without reaching it exactly. Playback is accelerated.
Reading the diagram: green is downward velocity, gold is signed acceleration. Purple dashes show the current terminal-speed target. Vertical dashes mark parachute changes. Force arrows show opposite directions and labelled magnitudes.
Status: Ready
Live Readouts
Try these experiments
Choose a preset, predict the motion, then press Play. Presets do not start playback.
DISCOVER — The Golden Rules
DOK 1 — RecallYou explored drag and force balance. Flip all four cards to reveal the golden rules for terminal motion.
Rule #1
Gravity remains
Click to flip
Gravity remains
Weight W = mg acts downward throughout the fall. Drag opposes motion relative to the air; it is upward for downward motion in still air. In this mission buoyancy is ignored.
Rule #2
Acceleration follows net force
Click to flip
Acceleration follows net force
With downward positive, F_net = W − D and a = (W − D)/m. If W > D, downward speed grows. If D > W while velocity is downward, the object slows while still falling.
Rule #3
Terminal means constant velocity
Click to flip
Terminal means constant velocity
At terminal velocity D = W, net force is zero and acceleration is zero. Weight and drag are both present. The object keeps falling at a non-zero constant velocity.
Rule #4
A change of shape changes drag
Click to flip
A change of shape changes drag
Opening a parachute increases drag at the same speed. Velocity is continuous as acceleration changes. A lower terminal speed is approached. For the same drag–speed relationship, greater mass requires greater drag to balance weight.
Memory: zero net force means zero acceleration; it does not mean zero force or zero velocity.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth #1: “At terminal velocity there are no forces acting on the falling object.”
Correct — the claim is false.
Weight and drag still act. Their vector sum is zero, so acceleration is zero. Velocity remains constant and non-zero.
Myth #2: “In a vacuum, a heavier ball released from rest accelerates more than a lighter ball.”
Correct — the claim is false.
With no air resistance, gravitational force is mg and F = ma gives a = g. The greater force on the heavier object accompanies greater inertia. Matching initial conditions give matching ideal falling motion.
Both claims corrected. Distinguish force balance from absence of forces.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyAnswer two multiple-choice and two numerical force questions. Downward is positive; g = 9.8 m/s². Get all four correct. Guides appear after an attempt.
Your force toolkit
Question progress
Waiting for Q1...
Instructor Q1 — Balanced Forces
A falling object has the forces and downward velocity shown. What happens next if these forces remain unchanged?
Instructor Q2 — Opening a Parachute
At this instant just after opening a parachute, which describes the motion?
Instructor Q3 — Signed Acceleration
Find the signed acceleration of this falling object, in m/s². Downward is positive.
Instructor Q4 — Terminal Force
A 55 kg object is falling at terminal velocity. What is the magnitude of its air resistance, in newtons? Use g = 9.8 m/s².
4/4 — Graphs Mastered!
You distinguished velocity, acceleration and force balance. Apply the ideas independently!
✎ PRACTICE — Terminal Velocity Evidence
DOK 1–3 — PracticeChallenge 1: Read the Forces
A falling object has mass 75 kg. Its weight is 735 N downward and air resistance is 285 N upward. Find its signed acceleration in m/s². Downward is positive.
Step-by-Step Solution
Combine forces: F_net = 735 − 285 = +450 N.
Use mass: a = 450/75 = +6 m/s², downward.
Challenge 2: Use the Measured Drag Record
An 80 kg skydiver maintains the posture used to obtain this measured straight-line drag–speed record in still air. Use g = 9.8 m/s². From the record, find the terminal speed in m/s. Buoyancy is negligible.
Step-by-Step Solution
Weight: W = 80 × 9.8 = 784 N.
Balance: terminal motion requires upward drag 784 N.
Read the straight line: between (40 m/s, 560 N) and (60 m/s, 840 N), 784 N occurs at 40 + (784 − 560)/(840 − 560) × 20 = 56 m/s.
Challenge 3: Audit the Parachute Report
At this instant a 90 kg skydiver is moving downward at 36 m/s. Weight is 882 N downward and drag is 2232 N upward. Downward is positive. A student writes: “A negative acceleration means the skydiver is already moving upward. When the new terminal velocity is reached, the skydiver stops and both forces disappear.” Find the signed net force and acceleration at the shown instant. Explain both errors in the report.
Step-by-Step Solution
Net force: F_net = 882 − 2232 = −1350 N, upward.
Acceleration: a = −1350/90 = −15 m/s², upward.
Error 1: velocity is still +36 m/s downward at this instant. Upward acceleration reduces that downward speed; it does not mean velocity has already reversed.
Error 2: at the lower terminal velocity drag equals weight, with both forces non-zero. Net force and acceleration are zero, and the skydiver continues downward at a non-zero constant speed.
☷ CHALLENGE — Rebuild the Parachute Explanation
DOK 2 — ApplySix Linked Steps to a New Balance
A 100 kg skydiver is moving downward when a parachute opens. At the shown instant weight is 980 N down and drag is 1960 N up. Downward is positive. After opening, the shape remains fixed and drag increases with speed. Arrange six linked steps explaining the immediate motion and approach to the new terminal speed. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Physics Insight — Same Air, Different Balance
With the same increasing drag–speed relationship, an object with greater mass has greater weight and needs a higher speed for drag to balance it. This comparison assumes the same shape, area, posture and air conditions.
Different shapes can overturn a simple mass comparison. In a vacuum there is no terminal-speed balance with air resistance; matching initial conditions give the same gravitational acceleration.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your younger sibling says a skydiver stops when drag equals weight. Teach what force balance actually means.
Explain why acceleration decreases during the fall, what terminal velocity means, and what changes when a parachute opens. Type at least three short sentences, or draw a labelled explanation using at least three purposeful strokes. Exact keywords are not required.
Type Your Explanation (≥ 3 sentences)
Draw labelled force diagrams and a velocity–time record for the fall and parachute opening. Add at least three purposeful strokes. This checks effort; compare the physics with the Vault.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
📓 Crest’s Secret Notebook
🪂Mission 2.15 — Terminal Velocity
Balance the forces, explain the motion.
Weight: W = mg.
Signed net force: F_net = W − D.
Signed acceleration: a = (W − D)/m.
At terminal velocity: D = W; F_net = 0; a = 0.
Velocity stays non-zero and constant.
Illustrative linear lab only: D = kv; v_terminal = mg/k.
1. Name the forces and the model
Weight acts downward. Air resistance opposes motion relative to the air, so it acts upward for an object falling through still air. Ignore buoyancy in this mission. Take downward as positive and use g = 9.8 m/s² unless an assessment supplies another value.
The core syllabus explanation is qualitative: drag increases with speed, and a falling object can approach terminal velocity. The lab chooses D = kv to illustrate this behaviour; the linear law is not a universal law of air resistance or a required quantitative syllabus result.
| Condition | Signed acceleration | Motion for downward v > 0 |
|---|---|---|
| Weight > drag | Positive; net force down | Downward speed increases |
| Weight = drag | Zero; forces balance | Constant downward velocity |
| Drag > weight | Negative; net force up | Downward speed decreases |
2. From release to terminal motion
Released from rest in still air, the object initially has zero drag in the model and downward acceleration g. As its downward speed rises, drag grows. Weight stays constant, so net force and acceleration decrease. Speed keeps increasing while acceleration is positive.
At terminal velocity the forces balance. The object keeps falling; terminal does not mean stopped. In the linear lab, a start from rest approaches the exact terminal speed asymptotically. The display distinguishes exact initial balance from being within 1% of balance during a finite run.
3. Opening a parachute
Opening changes the drag–speed relationship. At the existing downward speed, drag can exceed weight. The resultant and acceleration point upward while velocity remains downward, so the skydiver slows.
Velocity does not jump instantly. As downward speed decreases with the parachute shape fixed, drag decreases toward weight. A lower constant downward terminal speed is approached. Weight remains present throughout.
4. Reading a measured drag–speed graph
First determine the weight from mass and the supplied g. Terminal motion requires the same magnitude of drag. Locate that force on the drag axis, move to the measured curve and read the corresponding speed. Interpolate only where the record supports it; do not assume every drag record is linear.
5. Comparing masses fairly
For the same increasing drag–speed relationship, greater mass gives greater weight and a higher balancing speed. Keep shape, area, posture and air conditions comparable. Mass alone cannot rank terminal speeds when those conditions differ.
🚨 Crest’s Exam Secrets
Zero net force does not erase forces
At terminal velocity, weight and drag are non-zero and equal in magnitude. Their opposite directions make the vector sum zero.
Negative acceleration does not identify velocity direction
In this mission negative means upward acceleration. An object can still be moving downward and slowing. Use the velocity information separately.
Speed can increase while acceleration decreases
During the early fall, acceleration is positive but shrinking. The velocity–time curve continues rising with a decreasing gradient.
Keep units and signs distinct
Mass is in kg, weight and drag in N, speed in m/s and acceleration in m/s². Subtract the opposing forces before dividing by mass. An upward resultant is negative under the stated downward-positive convention.
🧠 Memory hooks
- Weight stays; drag grows with speed.
- Net force chooses acceleration, not current velocity.
- Terminal = constant velocity, with balanced forces.
- Open chute: velocity is continuous, acceleration can change.
- Same drag curve + greater weight → higher balancing speed.
✨ Bonus wonder — why mass cancels in a vacuum
With gravity alone, mg = ma gives a = g. A heavier object has more gravitational force and more inertia in the same proportion. Matching initial conditions produce matching ideal falls. Without air resistance there is no air-drag terminal speed in this model.
✓ Crest’s Checklist
- I state the force directions and positive direction.
- I distinguish individual forces from their resultant.
- I connect the resultant to acceleration using mass.
- I separate velocity direction from acceleration direction.
- I read terminal speed from force balance and a valid drag record.
- I keep illustrative drag laws separate from the required qualitative explanation.
— Crest ✨ “Balanced forces keep motion steady.”
Mission 2.15 Complete! · All 10 levels cleared · PHYSICS CREST
🏅 Master of Terminal Velocity
Terminal velocity, force balance and changing drag — mastered with the model assumptions stated clearly.