WONDER — The Mystery
Why Does the Falling-Speed Curve Flatten?
The downward-speed record starts steep and gradually flattens. Later, a parachute changes its shape again. How can the gradient change while gravity keeps acting? What can the curve tell us about acceleration and force?
Core model: falling through still air under weight and upward drag, with buoyancy neglected. Use g = 9.8 m/s² and downward positive. The required physics is qualitative drag, force balance and graph interpretation. The lab’s quadratic drag law and its parameter calculations are explicitly illustrative enrichment; they are not a universal law or an additional required syllabus formula.
Today’s Mission: interpret changing gradients, connect measurements to net force, compare mass and geometry fairly, and audit a graph report.
PREDICT — Commit to Your Answer
DOK 2 — PredictA skydiver is falling at constant downward velocity. A parachute opens and, at the existing speed, drag becomes greater than weight. Which describes the motion immediately after the change?
Choose the velocity and acceleration behaviour immediately after the change.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction: B) downward velocity continues while acceleration points upward.
The larger upward drag makes the resultant and acceleration point upward. The skydiver is still moving downward at that instant, so downward speed starts decreasing. The velocity–time record stays continuous while its gradient changes. In a sudden-change model the acceleration can jump; velocity cannot jump under the finite forces assumed here.
As speed decreases with the open shape fixed, drag decreases toward weight. A lower non-zero terminal speed is approached.
▶ PLAY — Quadratic Drag Graph Lab
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: set mass, area, air density and starting speed. Choose either drag coefficient or target terminal speed. Play or step through a full record.
- • OBSERVE: velocity, graph gradient, acceleration and forces share one clock. Change one input at a time to make a fair comparison.
- • DISCOVER: open or close the model parachute during playback. It changes effective area while preserving velocity and the earlier record.
Downward is positive, g = 9.8 m/s², and buoyancy is ignored. Illustrative quadratic model: drag magnitude D = ½ρC_dAv². Speed is relative to still air; this model is not valid for every flow regime. Time records have no ground or impact. A full finite run from rest approaches exact balance without reaching it. Ordinary setting changes start a new run; parachute changes retain history. Playback is accelerated.
Reading the diagram: green is downward velocity; gold is acceleration. Purple dashes show the current terminal-speed target. Vertical dashes mark area changes. Arrows show the labelled force magnitudes on a schematic object.
Status: Ready
Live Readouts
Try these experiments
Choose a preset, predict the curves, then press Play. Presets do not start playback or complete the investigation.
DISCOVER — The Golden Rules
DOK 1 — RecallFlip all four cards to connect drag, graph shape and force balance.
Rule #1
Drag opposes relative motion
Click to flip
Drag opposes relative motion
For downward motion through still air, drag points upward. It generally grows with speed. The illustrative lab uses D = ½ρC_dAv², so doubling speed quadruples drag while ρ, C_d and A remain fixed; this scaling is model-specific.
Rule #2
Balance sets terminal velocity
Click to flip
Balance sets terminal velocity
At terminal velocity, drag equals weight, net force is zero and acceleration is zero. Both forces remain present. In the lab only, v_terminal = √[2mg/(ρC_dA)]. Compare masses only with drag geometry and air conditions fixed.
Rule #3
Read the gradient
Click to flip
Read the gradient
Velocity–time gradient is acceleration. From rest, a falling object’s downward-positive velocity rises with a decreasing gradient toward a plateau. Starting above the balancing speed gives a decreasing curve with negative gradient; velocity remains downward.
Rule #4
Shape changes the target
Click to flip
Shape changes the target
Increasing effective area reduces the balancing speed. At an existing high speed, increased drag can give upward acceleration while velocity is still downward. The v–t curve stays continuous; its gradient changes. Real deployment takes finite time.
All four rules explored. Distinguish graph value, gradient and force balance.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth #1: “A flat velocity–time record for a falling object means its drag force is zero.”
Correct — the claim is false.
Flat means zero gradient and zero acceleration. For this falling object drag balances the non-zero weight. The graph is above zero, so the object continues moving downward.
Myth #2: “With the same mass and air conditions, increasing the effective drag area makes terminal speed greater.”
Correct — the claim is false.
Under the stated model, a larger area gives greater drag at a given speed. Weight is unchanged, so balance occurs at a lower speed. Keep the mass, air density and drag coefficient fixed for this comparison.
Both claims corrected. Read gradients and compare drag conditions fairly.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyComplete two graph multiple-choice and two numerical force questions. Downward is positive and g = 9.8 m/s². Guides appear after an attempt; all four correct answers are required.
Your force toolkit
Question progress
Waiting for Q1...
Instructor Q1 — Flat Velocity Record
This downward velocity record is flat and above zero. Which statement follows?
Instructor Q2 — Changing Gradient
An object is released from rest and produces the velocity record shown. How does downward acceleration change?
Instructor Q3 — Signed Acceleration
At this instant find the signed acceleration in m/s². Downward is positive.
Instructor Q4 — Terminal Drag
A 72 kg object is falling at terminal velocity. Find its drag-force magnitude in N. Use g = 9.8 m/s².
4/4 — Graphs Mastered!
You connected graph value and gradient with force balance. Apply the ideas independently.
✎ PRACTICE — Drag and Graph Evidence
DOK 1–3 — PracticeChallenge 1: The Measured Force Snapshot
At this instant a falling object has mass 64 kg, weight 627.2 N downward and drag 403.2 N upward. Find its signed acceleration in m/s². Downward is positive.
Step-by-Step Solution
Combine forces: F_net = 627.2 − 403.2 = +224 N.
Acceleration: a = 224/64 = +3.5 m/s², downward.
Challenge 2: Use the Curved Time Record
An 85 kg skydiver has this measured velocity–time record after a parachute opens. Downward is positive. Find the signed average resultant force over the interval from 0 to 4 s, in newtons. The mass stays constant.
Step-by-Step Solution
Average acceleration: a_avg = (30 − 50)/(4 − 0) = −5 m/s².
Average resultant: F_avg = 85 × (−5) = −425 N, upward. The curved record shows changing instantaneous acceleration; this is the average over 0–4 s, not the instantaneous force at either endpoint.
Challenge 3: Audit the Graph Report
At the shown instant just after an area change, an 80 kg skydiver has downward velocity +40 m/s, weight 784 N down and drag 1584 N up. Downward is positive. A student writes: “Opening the parachute makes velocity jump instantly to the new terminal speed. A negative v–t gradient means the skydiver is already moving upward. When the v–t curve becomes flat, drag is zero.” Find the signed resultant force and acceleration at this instant. Explain all three errors.
Step-by-Step Solution
Resultant: F_net = 784 − 1584 = −800 N, upward.
Acceleration: a = −800/80 = −10 m/s², upward.
Error 1: finite drag changes acceleration, while velocity stays continuous. It does not jump to the new balancing speed.
Error 2: the negative gradient gives upward acceleration. Velocity is still +40 m/s downward, so the skydiver slows while falling.
Error 3: a flat positive velocity record means zero acceleration and zero resultant. Drag balances the non-zero weight; drag is not zero.
☷ CHALLENGE — Rebuild the Falling Record
DOK 2 — ApplySix Linked Steps from a Snapshot to a Plateau
An early snapshot shows a 65 kg object falling downward with weight 637 N down and drag 182 N up. Its shape and air conditions then stay fixed, with drag increasing with speed. Downward is positive. Arrange six linked steps connecting this snapshot to the later terminal plateau. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Physics Insight — A Curve Is a Force Record
The velocity–time gradient tells acceleration. With constant mass, it therefore tells the resultant force per unit mass. A steep positive gradient means a large downward resultant; a flatter positive gradient means a smaller one.
A negative gradient can accompany positive downward velocity. A flat positive record means constant downward motion with balanced forces. Neither case means gravity vanished.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your cousin says a flat falling-speed graph means gravity switched off. Use the graph and forces to teach what actually happens.
Explain the changing gradient during a fall, the terminal plateau, and the continuous velocity when a parachute changes the gradient. Type at least three short sentences, or draw a labelled explanation with at least three purposeful strokes. Exact keywords are not required.
Type Your Explanation (≥ 3 sentences)
Draw a velocity–time curve before and after an area change, and label the corresponding force directions. Use at least three purposeful strokes. This checks effort; compare your physics with the Vault.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
📓 Crest’s Secret Notebook
🪂Mission 2.16 — Drag & Terminal Velocity
Read the curve, explain the forces.
W = mg; F_net = W − D; a = F_net/m.
Velocity–time gradient = signed acceleration.
Average acceleration = Δv/Δt.
For constant mass: average resultant = mΔv/Δt.
Terminal motion: D = W, F_net = 0, a = 0.
Constant velocity need not be zero.
1. State the model and the sign convention
Weight acts downward. Drag opposes motion relative to the air; it points upward for downward motion in still air. This mission ignores buoyancy and uses g = 9.8 m/s². Downward is positive, so F_net = W − D.
The required syllabus physics is qualitative drag, terminal velocity, Newton’s laws and graph interpretation. The lab’s quantitative quadratic law is illustrative enrichment. Use a stated drag law only when the task explicitly supplies that model.
| v–t feature | Acceleration | Force interpretation |
|---|---|---|
| Positive gradient becoming smaller | Downward acceleration decreases | Drag grows; downward resultant shrinks |
| Negative gradient with positive velocity | Upward; downward speed decreases | Drag exceeds weight |
| Flat positive plateau | Zero; velocity remains downward | Drag balances non-zero weight |
2. How a falling record flattens
From rest, drag is initially zero in the model and acceleration is g. As downward velocity grows, drag grows while weight stays constant. The downward resultant shrinks, so the v–t gradient decreases. Speed is still increasing while that gradient is positive.
At terminal velocity, drag balances weight and the gradient is zero. Both forces remain present, and the object continues downward at constant speed. An ideal model approaches this limit gradually; exact balance from rest is not reached at a finite model time.
3. A parachute changes the gradient, not velocity instantly
Increasing effective drag area can make drag exceed weight at the current speed. Acceleration becomes upward while the skydiver is still moving downward. The velocity curve stays continuous and begins decreasing toward a lower positive terminal speed.
Under the lab’s ideal sudden change, acceleration jumps to a finite new value. That jump is not an infinite impulse or an instantaneous velocity jump. Real parachute deployment takes time, so its force change is more gradual.
4. Average and instantaneous values are different
For a curved velocity record, the change between two endpoints divided by the time interval gives average acceleration. With constant mass, multiplying by mass gives the average resultant force. The instantaneous acceleration comes from the tangent gradient at one instant; it can differ from the interval average.
A graph value supplies velocity, not acceleration. A velocity record above zero can have a negative gradient and still represent downward motion.
5. Illustrative quadratic law — enrichment
Drag magnitude: D = ½ρC_dAv².
Model balance: v_terminal = √[2mg/(ρC_dA)].
ρ: air density / (kg/m³); C_d: dimensionless.
A: reference area / m²; v: relative speed / (m/s).
The formula gives magnitude; force direction is opposite the relative motion. Holding ρ, C_d and A fixed, doubling speed quadruples drag. This scaling is specific to the quadratic model; real flow regimes can behave differently.
For fixed drag conditions, model terminal speed is proportional to √mass. At fixed mass, increasing ρ, C_d or A lowers the model balancing speed. Compare one parameter at a time; mass alone cannot rank real skydivers with different shapes and postures.
🚨 Crest’s Exam Secrets
Read value and gradient separately
The height of a v–t record is signed velocity. Its gradient is acceleration. A negative gradient does not automatically mean upward velocity.
Flat means zero resultant, not zero drag
A falling object with a flat positive velocity record has drag equal to weight. Neither force disappears.
Do not use constant-acceleration equations across a drag curve
When drag changes with speed, acceleration is generally non-constant. Use measured endpoint changes for averages, and tangents for instantaneous values.
Keep the chosen signs throughout
Here an upward resultant and upward acceleration are negative. Use N for forces, kg for mass, m/s for velocity and m/s² for acceleration. The quadratic formula uses speed relative to the air.
🧠 Memory hooks
- Value gives velocity; gradient gives acceleration.
- Speed can grow while acceleration shrinks.
- A plateau above zero means continued motion.
- Changing drag changes the gradient; velocity stays continuous.
- Compare mass only with the same drag conditions.
✨ Bonus wonder — why the drag model matters
In a linear model, doubling speed doubles drag. In this quadratic model, it quadruples drag. Both can illustrate approach to force balance, but their curve shapes and mass scaling differ. A model choice must be stated and tested against the situation; neither law describes every flow.
✓ Crest’s Checklist
- I state the positive direction and the forces.
- I distinguish velocity value from graph gradient.
- I connect resultant force with acceleration.
- I distinguish average from instantaneous force.
- I preserve velocity continuity at a finite force change.
- I use quantitative drag laws only under their stated assumptions.
— Crest ✨ “Read the slope. Keep the forces.”
Mission 2.16 Complete! · All 10 levels cleared · PHYSICS CREST
🏅 Master of Drag Graphs
Drag, terminal velocity & motion graphs — mastered. You now see the invisible air that catches every falling thing.