WONDER — The Mystery
DOK 1 — EngageThe Bullet Train Safety Test
A bullet train accelerates from 0 to 300 km/h in 60 seconds. A sports car accelerates from 0 to 100 km/h in just 4 seconds.
The train reaches a much higher speed. The car reaches its speed much faster. So which one has more acceleration?
The Mystery: the train reaches a higher speed, but the car changes its velocity in less time. Which has the greater average acceleration during its test? Can a fast-moving object have zero acceleration?
Today’s Mission: investigate acceleration as a change in velocity per unit time. Compare the train and car, test signed velocities and reversals, and discover what the start and finish can—and cannot—tell you about the motion in between.
PREDICT — Commit to Your Answer
DOK 2 — Predict🚗 Scenario: a car’s velocity changes from +10 m/s to +30 m/s in 5 s. Take east as positive. What is its average acceleration?
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct Answer: A) a = 4 m/s²
Average acceleration uses the change in signed velocity divided by elapsed time: (30 − 10)/5 = 4 m/s² east. It equals acceleration at each instant only if the change is uniform.
The Simple Truth: Acceleration is the rate at which velocity CHANGES. Divide the change in velocity (Δv = vf − vi) by the time it took (Δt), and you get the acceleration!
PLAY — The Acceleration Lab
DOK 2 — Investigate Interactive SimWhat you will DO and OBSERVE
- • DO: choose a profile, signed initial/final velocities and total time; in Two stages, set the half-time velocity too.
- • OBSERVE: use Play/Pause/Step/Reset; compare the live velocity, graph slope and acceleration arrows.
- • DISCOVER: negative acceleration can speed up a westward car. Equal start/end velocities can hide acceleration in between.
East/right is positive. Uniform acceleration gives a straight velocity–time line. Two stages gives two straight segments, with an idealized abrupt change of acceleration at half-time. Animation is accelerated; time labels show physical time.
Reading the diagram: time is horizontal and signed velocity vertical. Grey dashes show the planned profile; cyan shows the elapsed part. Slope is acceleration. The track uses a fixed metre scale for each test; v and a arrows show direction and are not to a common scale.
Live Readouts
DISCOVER — The Golden Rules
DOK 1 — RecallYou've played with the Acceleration Lab. Now flip each card to reveal the four golden rules of acceleration.
Rule #1
Acceleration Definition
Click to flip
The average formula
ā = (vf − vi) / Δt
Use signed velocities and a non-zero time interval. This is the average acceleration. If acceleration is constant, this value also applies at every instant. Instantaneous acceleration is the local slope of a velocity–time graph.
Rule #2
Positive vs Negative
Click to flip
The Sign Rule
Positive/negative tells direction relative to your chosen axis. Velocity and acceleration with the same sign → speed increases; opposite signs → speed decreases, away from the instant v = 0.
Zero acceleration throughout an interval means constant velocity. Zero average acceleration alone means equal endpoint velocities.
Rule #3
Acceleration is a Vector
Click to flip
Direction Matters
Like velocity, acceleration is a VECTOR — it has magnitude AND direction.
If "right" is positive: accelerating right = +a, accelerating left = −a, slowing down while moving right = −a.
The sign of a tells the direction of the velocity CHANGE, not the direction of motion!
Rule #4
Units & Common Values
Click to flip
m/s² — per second per second
Constant a = +5 m/s² changes the eastward velocity component by +5 m/s each second. The speed may increase or decrease depending on its direction.
Convert km/h to m/s by dividing by 3.6. Near Earth’s surface, g ≈ 9.8 m/s² downward when air resistance is negligible.
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each myth. The truth will be revealed instantly.
💀 Myth #1: "Acceleration always means speeding up."
Correct — the answer is FALSE.
Acceleration means velocity is CHANGING — which can mean speeding up, slowing down, or changing direction! Positive or negative acceleration describes direction, not automatically speeding up or slowing down. An object speeds up when velocity and acceleration have the same sign, and slows down when they have opposite signs. If a car slows from 30 m/s to 10 m/s, a = (10−30)/t = negative — it's still accelerating (decelerating)! Acceleration = any change in velocity, not just increase.
💀 Myth #2: "A high-speed object always has high acceleration."
Correct — the answer is FALSE.
A bullet train moving at constant velocity on a straight track has zero acceleration, however large its speed. A car stationary throughout the interval also has zero acceleration. High speed alone does not tell you the rate of velocity change.
Myths destroyed! You're inoculated against the two biggest acceleration traps.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — Active DrillYour instructor has 4 rapid-fire questions about acceleration. The live scene on the left updates as you answer. Get all 4 right to unlock the practice round.
Live Acceleration Scene
Reading the diagram: each green tile records a correct response. Read the given velocities and times in the question figures.
Current Question Scenario
Waiting for Q1...
Instructor Q1 — Basic Compute
A car goes from 0 to 20 m/s in 4 s. What is the average acceleration?
Instructor Q2 — Negative Acceleration
A car at 30 m/s brakes to 10 m/s in 5 s. What is the average acceleration?
Instructor Q3 — Numeric Compute
vi = 5 m/s, vf = 25 m/s, t = 4 s. Find average a (in m/s²).
Instructor Q4 — Coming to a Stop
vi = 20 m/s, vf = 0 m/s (stopped), t = 5 s. Find average a (in m/s², include sign).
4/4 — Acceleration Mastered!
You now know: a = Δv/Δt, positive vs negative acceleration, and how to handle "coming to a stop". Time to practice!
✎ PRACTICE — Solve It Yourself
DOK 1–3 — Practice🎯 Challenge 1: The Rocket Sled
A rocket sled’s velocity changes from 0 to 36 m/s east in 8 s. Take east as positive. Find its signed average acceleration, in m/s².
Step-by-Step Solution
Step 1 — Identify: ā = (vf − vi)/Δt.
Step 2 — Substitute: ā = (36 − 0)/8.
Step 3 — Solve: ā = +4.5 m/s² east.
🎯 Challenge 2: The Westbound Train
A westbound train has an initial speed of 18 m/s and a final speed of 39 m/s, after 7 s. It travels west throughout. Take east as positive. Find its signed average acceleration, in m/s².
Step-by-Step Solution
Step 1 — Identify: east is positive; westward velocities are negative.
Step 2 — Substitute: ā = [−39 − (−18)]/7 = −21/7.
Step 3 — Solve: ā = −3 m/s² (west). Negative velocity and negative acceleration mean the train speeds up.
🎯 Challenge 3: Audit the Reversal Report
A car has uniform acceleration while its velocity changes from +18 m/s to −12 m/s in 5 s, with east positive. A student reports “acceleration = −1.2 m/s²; the car slows down for all 5 s because acceleration is negative”. Audit the report: give the correct signed acceleration, the elapsed time when the car is instantaneously at rest, and explain both errors.
Step-by-Step Solution
Step 1 — Identify: acceleration uses signed velocity change, not change in speed. Uniform acceleration allows v = vi + at.
Step 2 — Substitute: a = [−12 − (+18)]/5 = −30/5; 0 = 18 − 6t.
Step 3 — Solve: a = −6 m/s²; t = 3 s. The student subtracted speed magnitudes. The car slows eastward for 3 s, then reverses and speeds up westward for the remaining 2 s.
CHALLENGE — The Einstein Sequence
DOK 2 — SequenceSequence the Acceleration Solution
A train’s velocity changes from 4 m/s west to 16 m/s west in 3 s. Take east as positive. Arrange the six linked steps to find its average acceleration and interpret the motion. Select a card then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Einstein's Insight — Why Gravity Feels Like "Constant Acceleration"
Near Earth's surface, an object in free fall with negligible air resistance has an acceleration of about 9.8 m/s² downward. Its downward velocity component therefore changes by about 9.8 m/s each second.
For an object released from rest, taking downward as positive: After 1 s: 9.8 m/s. After 2 s: 19.6 m/s. After 3 s: 29.4 m/s.
An object released from rest speeds up downward. An object initially moving upward slows first, then falls faster after turning. In the same gravitational field, with air resistance negligible, different masses share the same free-fall acceleration.
TEACH — The Feynman Technique
DOK 3 — ExplainYour Final Mission:
Your 10-year-old younger sibling just watched a movie where a sports car "accelerates really fast" and asks you: "Wait, doesn't the bullet train have MORE acceleration because it goes way faster?"
Explain to your sibling what acceleration REALLY means, why the bullet train's high speed doesn't mean high acceleration, and how to actually compare the two using the formula a = Δv / Δt!
Type Your Explanation (≥ 3 sentences)
Draw two velocity–time graphs or initial/final velocity arrows to compare the train and car. Mark directions and changes. Add at least three purposeful strokes. This checks effort; it does not mark the physics.
Cyan pen selected.
10 · THE CREST VAULT DOK 1 — Consolidate
Final reward below
Hidden exam secrets inside — Crest's free notebook.
📓 PHYSICS CREST — Secret Notebook
🏎️Mission 2.3 — Acceleration
"The Bullet Train vs. The Sports Car" 🚄🏎️
🌍 OVERVIEW: What is Acceleration?
Average ā = (vf − vi)/Δt, with signed velocities and Δt > 0.
For constant acceleration: a = ā and v = vi + at.
Instantaneous a = local gradient of the velocity–time graph.
Same signs of v and a → speed increases; opposite signs → speed decreases, away from v = 0.
Zero average a means equal endpoint velocities; zero a throughout means constant velocity.
Acceleration is the rate of change of velocity. It tells you how quickly an object's velocity changes — in magnitude, direction, or both. The sign tells you the direction of the velocity change.
1. The Master Formula
Average acceleration: ā = Δv/Δt = (vf − vi)/Δt. The same value applies at each instant only for constant acceleration.
- a = acceleration (m/s²)
- vf = final velocity (m/s)
- vi = initial velocity (m/s)
- t = time interval (s)
- Δv = change in velocity = vf − vi
For constant a = +5 m/s², the chosen velocity component changes by +5 m/s each second.
2. Positive vs Negative Acceleration
- a > 0 (Positive): Acceleration points in the positive direction. The object speeds up only if its velocity is also positive.
- a < 0 (Negative): Acceleration points in the negative direction. The object slows down if velocity is positive, but speeds up if velocity is negative.
- a = 0 throughout: Velocity is constant. No change — no acceleration (even if the object is moving fast!).
Crucial Rule: Deceleration = speed decreasing. It occurs when velocity and acceleration point in opposite directions.
3. Acceleration is a VECTOR
Like velocity, acceleration has both magnitude AND direction.
- If "right" is positive: accelerating right = +a, accelerating left = −a.
- Slowing down while moving right = −a (velocity is decreasing).
- The SIGN of a tells you the direction of the velocity CHANGE, not the direction of motion!
4. Compare the Two Tests
| Test | Given change | Average a |
|---|---|---|
| Train | 0 → 300 km/h in 60 s | (300/3.6)/60 ≈ 1.39 m/s² |
| Car | 0 → 100 km/h in 4 s | (100/3.6)/4 ≈ 6.94 m/s² |
For the two given tests, the car’s average acceleration is 5 times the train’s. These are results for the stated tests, not universal values for every car or train.
🚨 CREST EXAM SECRETS
⚠️ COMMON MISTAKE #1: "Always Speeding Up" Myth
Students hear "acceleration" and think "going faster." WRONG!
- The Trap: Thinking negative acceleration isn't "real" acceleration.
- The Truth: Acceleration = ANY change in velocity. An object speeds up when velocity and acceleration point the same way, slows down when they point opposite ways, and can accelerate by changing direction even at constant speed. The sign depends on the chosen axis. Constant velocity means zero acceleration.
⚠️ COMMON MISTAKE #2: "High Speed = High Acceleration" Myth
Students see a fast object and assume it must have high acceleration.
- The Trap: Confusing velocity with acceleration.
- The Truth: A bullet train with constant velocity at 300 km/h on a straight track has a = 0. A parked car has a = 0. Only CHANGING velocity means non-zero acceleration. A sports car going 0→100 km/h in 4 s has HUGE acceleration, even though its top speed is much lower than the train's.
🔑 EXAM TIP: Watch the Sign on "Braking" Problems
When a problem chooses the initial direction of motion as positive and says "the car brakes to a stop," then vf = 0 and vi > 0, so a = (0 − vi) / t is negative. Keep the sign consistent with the stated or chosen positive direction.
🧠 MEMORY TRICK: "Fast CHANGE, not Fast SPEED"
- Acceleration measures how FAST velocity CHANGES, not how fast you go.
- Unit m/s² reads "meters per second, per second" — every second, your velocity changes by this many m/s.
- Sign tells the acceleration direction. Compare it with the velocity sign to decide whether speed increases or decreases.
🍎 BONUS FACT: Why Free Fall is Approximately Constant Near Earth’s Surface
In a vacuum and over ordinary near-surface heights, objects of different masses fall with approximately the same acceleration g ≈ 9.8 m/s² downward. A feather and hammer therefore fall together when air resistance is absent; the Moon demonstration is a famous example. Near Earth, the downward velocity component changes by about 9.8 m/s each second while this approximation holds.
✅ CREST CHECKLIST (memorize!)
- Average acceleration ā = (vf − vi)/Δt. If acceleration is constant, a = ā.
- Units: m/s² — "meters per second per second."
- Positive a = acceleration in the chosen positive direction.
- Negative a = acceleration in the chosen negative direction.
- Zero instantaneous acceleration throughout means constant velocity, not necessarily rest. Equal initial and final velocities guarantee only zero average acceleration.
- Acceleration is a VECTOR — sign tells direction of velocity change.
- Near Earth's surface, free-fall acceleration is about 9.8 m/s² downward when air resistance is negligible.
- High speed ≠ high acceleration (the bullet train trap!).
- Deceleration means acceleration opposite to velocity (speed decreases).
- Braking problems: if the initial direction is chosen positive, vf = 0 usually gives negative acceleration.
— Crest ✨
"Fast CHANGE, not fast SPEED. Sign tells direction."
Mission 2.3 Complete! · All 10 levels cleared · Physics Crest
You've earned the rank of Master of Acceleration.
Acceleration — mastered. You now know that fast change, not fast speed, is what makes things accelerate!