WONDER — The Mystery
DOK 2 — ConceptualizeThe Bicycle Race
In a bicycle race, a cyclist travels east along a straight track with constant acceleration. Her starting speed is 4 m/s and her finishing speed is 12 m/s. How far did she travel? At first, neither the acceleration value nor the time is given.
Then the coach shouts: “She rode for 10 seconds!” You now know the starting and finishing speeds and the elapsed time. The numerical value of acceleration is still missing.
So now you know: starting speed 4 m/s, ending speed 12 m/s, time 10 s. But the acceleration is still a mystery. Can you still find the distance without it?
The Mystery:
Without knowing acceleration, can you figure out how far the cyclist traveled in 10 seconds — using only the starting speed, ending speed, and time?
Today’s Mission: investigate how the starting velocity, finishing velocity and elapsed time can determine displacement for constant acceleration. Test forward motion, westward motion and a reversal. Discover why leaving a out of an equation does not mean the acceleration is zero.
PREDICT — Commit to Your Answer
DOK 2 — Predict🚴 Scenario: on a straight track, a cyclist’s eastward velocity increases uniformly from 4 m/s to 12 m/s in 10 s. How far does she travel?
Without using acceleration, which answer makes sense?
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct Answer: A) s = +80 m; because the cyclist never reverses, distance travelled is also 80 m.
For uniform acceleration, use the time average of the changing velocity. Here v̄ = (4 + 12)/2 = 8 m/s, so s = 8 × 10 = +80 m. There is no reversal, so distance is 80 m too.
The Simple Truth: When acceleration is unknown, use the AVERAGE velocity! The cyclist's velocity changes linearly from +4 to +12 m/s, so the average velocity is (4+12)/2 = 8 m/s. Multiply by 10 s and the displacement is +80 m. Because she never reverses, the distance travelled is also 80 m. No acceleration value is needed in this calculation!
PLAY — The Average Velocity Calculator
DOK 2 — Model & Observe Interactive SimWhat you will DO and OBSERVE
- • DO: set signed initial/final velocities and total time. Choose Uniform acceleration, or add a half-time velocity in Two-stage comparison.
- • OBSERVE: press Play/Pause/Step/Reset. Compare signed graph area, distance and the cyclist’s position.
- • DISCOVER: investigate a reversal and compare profiles with the same endpoints. Does the endpoint mean always give the true average?
East/right is positive. Uniform acceleration makes a straight v–t line. Two-stage comparison has two linear stages of equal duration; acceleration may change at half-time. Playback is accelerated; time labels show the physical elapsed time.
Reading the diagram: time is horizontal, signed velocity vertical. Cyan shows elapsed motion; grey dashes show the plan. Green area is positive displacement and pink area negative. The track has a fixed metre scale for each test. Velocity arrows show direction.
Live Readouts
Instructor-guided tests: choose a preset, predict displacement and distance, then press Play.
AHA! This intermediate velocity changes the graph area from the endpoint-mean estimate. Endpoint velocities alone do not determine displacement without information about the motion between them.
DISCOVER — The Golden Rules
DOK 1 — RecallYou've played with the Average Velocity Calculator. Now flip each card to reveal the four golden rules for the "No Acceleration" equation.
Rule #1
The "No Acceleration" Equation
Click to flip
Key #4 of the Four Equations
s = (vi + vf)/(2) × t = v̄ × t
s = signed displacement (m), vi = initial velocity, vf = final velocity, t = time (s), v̄ = average velocity.
Use when you know vi, vf, and t — but DON'T know acceleration!
Model: constant acceleration along a straight line.
Rule #2
Average Velocity
Click to flip
The mean of signed endpoints
v̄ = (vi + vf)/2
This is guaranteed when acceleration is constant: velocity changes linearly with time. With changing acceleration, endpoints alone are insufficient; a matching mean could be coincidental. Use signed velocities, including through a reversal.
Rule #3
When to Use It
Click to flip
Skip the Missing Variable
Use s = ½(vi+vf)t when: acceleration is constant, you know vi, vf, and t, and you want signed displacement s.
You DON'T need acceleration (a).
Each kinematic equation skips ONE variable — this one skips "a". Pick the equation that has what you know + what you want!
Rule #4
The Four Equations
Click to flip
Each Omits One Variable
1) s = ½(vi+vf)t — "No a"
2) s = vit + ½at² — "No vf"
3) vf² = vi² + 2as — "No t"
4) vf = vi + at — "No s"
Choose the one that matches what you know + want!
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each claim, then read the explanation. Neutralize both myths to continue.
💀 Myth #1: "You always need the numerical value of acceleration to find displacement."
Correct — the answer is FALSE.
You can find displacement WITHOUT knowing the numerical acceleration! The equation s = ½(vi+vf)t uses average velocity, while constant acceleration remains the model assumption.
If you know vi, vf, and t, you can find s directly — no numerical "a" is needed! This is the whole point of having multiple kinematic equations — each one handles a different "missing variable" scenario.
💀 Myth #2: "Average velocity is always (vi + vf)/2."
Correct — this universal claim is false.
Constant acceleration guarantees v̄ = (vi + vf)/2. Otherwise, the endpoints alone cannot determine the mean: use the full velocity–time profile and its signed area. Some changing-acceleration profiles happen to have the same mean; that does not make the rule universal.
Myths destroyed! You're inoculated against the two biggest "no-acceleration" traps.
INSTRUCTOR DRILL — Rapid Fire
DOK 2 — ApplyYour instructor has 4 rapid-fire questions about the constant-acceleration "No Acceleration" equation and average velocity. The live velocity-time graph on the left updates as you answer. Get all 4 right to unlock the practice round.
Live Velocity-Time Graph
Reading the diagram: each green tile records a correct response. Use the question figures for the given data.
Current Question Scene
Waiting for Q1...
Instructor Q1 — Pick the Equation
Which equation should you use if acceleration is constant and you know vi, vf, and t, but the numerical value of acceleration is not given?
Instructor Q2 — Validity Check
Which condition guarantees that v̄ = (vi + vf)/2 is the average velocity over the interval?
Instructor Q3 — Find signed displacement
Acceleration is constant; take east as positive. vi = 2 m/s, vf = 8 m/s, t = 5 s. Find the displacement s (in m) using s = ½(vi+vf)t.
Instructor Q4 — Find signed displacement
Acceleration is constant; take east as positive. vi = 0 m/s, vf = 20 m/s, t = 4 s. Find the displacement s (in m).
4/4 — No-Acceleration Equation Mastered!
You now know: s = ½(vi+vf)t, the average-velocity relation, and its constant-acceleration boundary. Time to practice!
✎ PRACTICE — Solve It Yourself
DOK 1–3 — Practice🎯 Challenge 1: The Training Ride
A cyclist’s velocity increases uniformly from 3 m/s east to 9 m/s east in 6 s. Take east as positive. Find her signed displacement in metres.
Step-by-Step Solution
Step 1 — Identify: uniform acceleration, vᵢ = +3 m/s, vf = +9 m/s, t = 6 s.
Step 2 — Substitute: s = ½(3 + 9) × 6.
Step 3 — Solve: v̄ = 6 m/s; s = +36 m east.
🎯 Challenge 2: The Westbound Rider
A cyclist travels west throughout a straight training run. Her speed increases uniformly from 6 m/s to 18 m/s in 7 s. Take east as positive. Find her signed displacement in metres.
Step-by-Step Solution
Step 1 — Identify: east positive: vᵢ = −6 m/s, vf = −18 m/s, t = 7 s.
Step 2 — Substitute: s = ½[−6 + (−18)] × 7.
Step 3 — Solve: v̄ = −12 m/s; s = −84 m, meaning 84 m west. No reversal: distance = 84 m.
🎯 Challenge 3: Audit the Reversal Report
A rider moves along a straight track with uniform acceleration. Velocity changes from +12 m/s to −4 m/s in 8 s, taking east as positive. A student reports distance = 64 m and displacement = +64 m, saying “the mean of the two endpoint speeds works for both”. Give the correct signed displacement, the total distance travelled, and explain the errors.
Step-by-Step Solution
Step 1 — Identify: vᵢ = +12 m/s, vf = −4 m/s, t = 8 s. The straight line reaches zero at 6 s, so the rider reverses.
Step 2 — Substitute: s = ½[12 + (−4)] × 8. The two area magnitudes are ½ × 6 × 12 = 36 m and ½ × 2 × 4 = 4 m.
Step 3 — Solve: s = +32 m = 36 − 4; total distance = 40 m = 36 + 4. Signed velocities, not endpoint speeds, give displacement. Through a reversal, averaging endpoint speeds is not the time-average speed; distance counts both parts positively.
CHALLENGE — The Einstein Sequence
DOK 2 — ApplySequence the "No-Acceleration" Steps
A cyclist speeds up uniformly from 3 m/s west to 9 m/s west in 4 s. Take east as positive. Arrange the linked steps to find displacement and distance. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Einstein's Insight — Why Keep Several Kinematic Equations?
Why do we need FOUR kinematic equations? Because real problems give you different pieces of information!
The Mechanic's Toolkit:
🚓 If a constant-acceleration problem gives vi, vf, and t → use s = ½(vi+vf)t; you do not need to calculate a first.
🛞 A stopping-distance problem gives vi, vf, and s → use the "no time" equation vf² = vi² + 2as.
🏃 A sprint analysis gives you vi, a, and t → use the "no final velocity" equation s = vit + ½at².
Each equation is a tool for a specific scenario — a mechanic doesn't use just one wrench!
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission:
Your 10-year-old friend is watching a bicycle race. They ask: "The cyclist started slow and ended fast — how can we find her displacement without first calculating her acceleration?"
Explain how constant acceleration makes average velocity equal to ½(vi+vf), why s = v̄t gives displacement, and why the bicycle's distance is also 80 m because it never reverses direction.
Type Your Explanation (≥ 3 sentences)
Draw a velocity–time graph for a bicycle run. Show the signed area and how a reversal changes the distance calculation. Add at least three purposeful strokes. This checks effort; it does not mark the physics.
Cyan pen selected.
10 · THE CREST VAULT DOK 1 — Consolidate
Final reward below
Hidden exam secrets inside — Crest's free notebook.
📓 PHYSICS CREST — Secret Notebook
🚴The "No Acceleration" Equation
"The Bicycle Race" 🚴🏁
🌍 OVERVIEW: The No-Acceleration Equation
v̄ = (vi + vf)/2; s = v̄t = ½(vi + vf)t.
Use signed velocities in m/s and elapsed time in s; s is displacement in m.
“No acceleration” means a is absent from this equation, not that a = 0.
Signed v–t area = displacement. Sum of area magnitudes = distance.
With no reversal: distance = |s|. With a reversal: split at v = 0.
When acceleration is constant and you know the starting velocity, ending velocity, and time, you can find the signed displacement without first calculating the numerical acceleration.
s = ½(vi + vf)t = v̄ × t
1. The Formula Broken Down
- s = signed displacement (m)
- vi = initial velocity (m/s) — velocity at the start
- vf = final velocity (m/s) — velocity at the finish
- t = time (s) — how long the trip takes
- v̄ = average velocity = ½(vi + vf)
2. The Average Velocity Concept
v̄ = (vi + vf)/2 — the simple average of the endpoints.
Why this works: For constant acceleration, velocity changes linearly with time. The midpoint of the velocity line on a v-t graph equals the true mean velocity.
Direction check: If velocity changes sign during the interval, the formula still gives signed displacement. Total distance must then account for each part of the motion separately.
The signed area under a v–t graph is displacement: s = v̄ × t. If velocity keeps one sign, distance travelled equals |s|; if velocity reverses, total distance is larger than |s|.
3. Four Useful Kinematic Equations — Each Omits One Variable
| # | Equation | "No..." (skips) | Use when you know... |
|---|---|---|---|
| 1 | s = ½(vi+vf)t | No numerical a | constant a; vi, vf, t → find s |
| 2 | s = vit + ½at² | No final velocity (vf) | vi, a, t → find s |
| 3 | vf² = vi² + 2as | No time (t) | vi, vf, s (or a) → find missing |
| 4 | vf = vi + at | No displacement (s) | vi, a, t → find vf |
🚨 CREST EXAM SECRETS
🔑 EXAM TIP: Pick the Right Equation
Exams love to give you a problem and watch you panic about which equation to use. Stay calm!
- Step 1: List what you KNOW (3 variables).
- Step 2: List what you WANT to find (1 variable).
- Step 3: Identify the missing variable (the 5th one) → that's the equation you need!
⚠️ COMMON MISTAKE #1: The "Always Need Acceleration" Myth
Students think you can't solve anything without acceleration. WRONG!
- If acceleration is constant and the problem gives vi, vf, and t — use s = ½(vi+vf)t. The numerical value of a is not needed.
- The average-velocity equation exists specifically for this scenario.
⚠️ COMMON MISTAKE #2: The "Average Always = (vi+vf)/2" Myth
Students blindly apply v̄ = (vi+vf)/2 to everything. WRONG!
- This only works for CONSTANT acceleration.
- For a changing-acceleration profile, find signed area from the complete v–t graph; straight segments can be handled geometrically.
- Check the stated model: do not assume constant acceleration from two endpoint velocities alone.
🧠 MEMORY TRICKS
- "Missing numerical a? Use the AVERAGE!" → s = ½(vi+vf)t (constant a)
- The ½ means take the mean of the two signed endpoint velocities.
- The (vi+vf) in parentheses tells you to add start + end.
- The "t" outside multiplies the average velocity by time → displacement!
- If vi=0, the equation simplifies to s = ½vft.
🚴 BONUS: The Bicycle Race Worked Example
vi = 4 m/s, vf = 12 m/s, t = 10 s.
- v̄ = ½(4 + 12) = ½(16) = 8 m/s
- s = v̄ × t = 8 × 10 = +80 m; because there is no reversal, distance = 80 m.
- Notice: We never computed acceleration — we didn't need to!
✅ CREST CHECKLIST (memorize!)
- s = ½(vi + vf)t is the “no numerical a” constant-acceleration relation.
- v̄ = ½(vᵢ + vf) is guaranteed for constant acceleration.
- Displacement = average velocity × elapsed time. Distance = average speed × elapsed time.
- On a v–t graph, signed area gives displacement; add area magnitudes to obtain distance.
- Each of the four equations listed here omits one variable; check constant acceleration before choosing.
- Don't confuse this with s = vit + ½at² (that one explicitly uses a).
- If vi = 0: s = ½vft (a handy shortcut).
— Crest ✨
"Missing a? Use the average!"
Mission 2.4 Complete! · All 10 levels cleared · Physics Crest
You've earned the rank of Master of the No-Acceleration Equation.
s = ½(vi + vf)t — mastered. For constant acceleration, you can find displacement without first calculating a.