WONDER — The Mystery
DOK 2 — ConceptualThe P.E. Class 100m Sprint
In P.E. class, a coach models a 100 m sprint as straight-line motion from rest with constant acceleration 2 m/s². How long would that idealized model take? Real sprinters do not keep constant acceleration for a whole race. Compare a skateboard moving with constant velocity: would the same method still work?
Here's the puzzle: you don't know your final speed when you cross the finish line — but you don't need it! Your coach only gave you the starting speed (zero), the acceleration, and the displacement. There's a kinematic equation that skips final velocity entirely.
The Mystery: neither test gives a final velocity. Can starting velocity, constant acceleration and elapsed time determine a change of position? Could an object move for several seconds yet finish back at its starting point?
Today’s Mission: discover the relation that omits final velocity. Test motion from rest, steady motion and reversals, and distinguish signed displacement from distance travelled.
Boundary: s is signed displacement. Its magnitude |s| equals distance travelled only when there is no reversal during the one-dimensional interval.
PREDICT — Commit to Your Answer
DOK 2 — Predict🏃 Scenario: in an idealized straight-track test, a sprinter starts from rest and has constant a = +2 m/s² for 10 s. Take forward as positive. What is her signed displacement?
Pick her displacement — and explain WHY!
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct Answer: A) s = 100 m (using s = ½at² = ½ × 2 × 100 = 100).
The velocity grows uniformly from zero. The velocity–time area is a triangle: ½ × 10 × 20 = 100 m. Equivalently, s = 0 × 10 + ½ × 2 × 10² = 100 m. Final velocity is not an input required by this equation.
The Simple Truth: The equation s = vi t + (1)/(2) a t2 works even when you don't know final velocity. With vi = 0: s = 0 × t + ½ a t2 = ½ a t2. Plugging in a = 2, t = 10: s = ½ × 2 × 100 = 100 m. The 100-meter sprint takes 10 seconds!
PLAY — Sprint Motion Laboratory
DOK 2 — Explore Interactive SimWhat you will DO and OBSERVE
- • DO: set signed initial velocity, constant acceleration and total time. Predict, then use Play/Pause/Step/Reset.
- • OBSERVE: switch graph views. Signed velocity–time area gives displacement; a displacement–time curve shows the changing position.
- • DISCOVER: the two signed terms can cancel. Reversing motion can give zero displacement with a non-zero distance travelled.
Right/east is positive. This is an idealized constant-acceleration track test; if velocity reaches zero, the same acceleration continues and may reverse the motion. Animation is accelerated; labels show physical time.
Reading the diagram: grey shows the planned graph and cyan the elapsed part. In velocity view, cyan area is positive and amber area negative. In displacement view, slope is velocity. The track uses a fixed metre scale throughout each test.
Live readouts — elapsed physical time
Right/east is positive. Constant acceleration continues throughout each test, including after a reversal. Distance adds path lengths; signed displacement records the net position change.
DISCOVER — The Golden Rules
DOK 1 — RecallYou've played with the Sprint Calculator. Now flip each card to reveal the four golden rules for the "no final velocity" equation.
Rule #1
The "No Final Velocity" Equation
Click to flip
The no-final-velocity relation
s = vᵢt + ½at²
Use constant acceleration in a straight line. s is signed displacement, vᵢ initial velocity, a signed acceleration and t elapsed time. Final velocity is omitted; it need not be zero.
Rule #2
Two Terms Combine
Click to flip
Two signed contributions
vᵢt + ½at²
These are algebraic displacement contributions, not separate path lengths. Either can be negative. If vᵢ = 0, only ½at² remains. If a = 0, only vᵢt remains. Squaring t gives seconds squared, making at² a length.
Rule #3
When to Use This Equation
Click to flip
Examiner trap: choose an axis
Use signed vᵢ and a consistently. Negative acceleration can speed up westward motion. After a reversal, distance is the sum of path lengths; it is not generally |s|. The equation gives net displacement.
Rule #4
The Four Kinematic Equations
Click to flip
Four useful constant-acceleration relations
s = ½(vᵢ + vf)t omits a
s = vᵢt + ½at² omits vf
vf² = vᵢ² + 2as omits t
vf = vᵢ + at omits s
Memory trick: no vf in the formula, no vf needed. These four are a useful selection, not an exhaustive list.
All four rules unlocked!
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzePick TRUE or FALSE for each myth. The truth will be revealed instantly.
💀 Myth #1: "You always need final velocity to find displacement."
Correct — the answer is FALSE.
The relation applies to straight-line motion with constant acceleration. The equation omits final velocity; it does not set final velocity to zero.
💀 Myth #2: "s = vᵢt + ½at² only works when starting from rest."
Correct — the answer is FALSE.
The equation works for ANY initial velocity, not just vi = 0! The vit term handles the initial velocity contribution. If vi = 5 m/s, a = 2 m/s², t = 3 s: s = 5 × 3 + ½ × 2 × 9 = 15 + 9 = 24 m. Both terms matter. Starting from rest (vi = 0) just simplifies it to s = ½at², but the full equation works for any vi.
Myths destroyed! You're inoculated against the two biggest "no final velocity" traps.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyYour instructor has 4 rapid-fire questions about the "no final velocity" equation. The live progress panel on the left updates as you answer. Get all 4 right to unlock the practice round.
Live Sprint Toolkit
Reading the diagram: each green tile records a correct response. Read each question for its given data.
Current Question Setup
Waiting for Q1...
Instructor Q1 — Select
Which relation omits final velocity?
Instructor Q2 — Simplify
For constant acceleration from rest, which expression gives signed displacement?
Instructor Q3 — From rest
An idealized straight-track runner starts from rest with constant a = +2 m/s² for 10 s. Take forward positive. Find signed displacement in m.
Instructor Q4 — Steady velocity
A skateboard has constant velocity +5 m/s for 4 s on a straight track. Find signed displacement in m.
4/4 — Equation toolkit ready!
You have checked the omitted variable, motion from rest, and steady motion.
PRACTICE — The G.U.E.S.S. Method
DOK 2–3 — Apply & Reason🎯 Challenge 1: From Rest
A trolley starts from rest on a straight track. Its constant acceleration is +4 m/s² for 3 s. Find its signed displacement in m.
Step-by-Step Solution
Step 1 — Identify: s = vᵢt + ½at², with vᵢ = 0.
Step 2 — Substitute: s = 0 × 3 + ½ × 4 × 3².
Step 3 — Solve: s = +18 m.
🎯 Challenge 2: Two Contributions
A skateboard starts with velocity +6 m/s and has constant acceleration −2 m/s² for 4 s. Right is positive. Find its signed displacement in m.
Step-by-Step Solution
Step 1 — Identify: s = vᵢt + ½at², right positive.
Step 2 — Substitute: s = 6 × 4 + ½ × (−2) × 4² = 24 − 16.
Step 3 — Solve: s = +8 m. Rest occurs at 3 s; the final second is leftward, so net displacement and distance differ.
🎯 Challenge 3: Audit the Reversal Report
A trolley has initial velocity +12 m/s and constant acceleration −4 m/s² for 5 s. Right is positive. A student reports: “displacement is 60 m; distance travelled is also 60 m, because displacement and distance always match.” Give both corrected values and explain the calculation error and the distance/displacement error.
Step-by-Step Solution
Step 1 — Identify: s = vᵢt + ½at². Rest occurs when 0 = 12 − 4t, so t = 3 s.
Step 2 — Substitute: s(5) = 12 × 5 + ½ × (−4) × 5² = 60 − 50 = +10 m. At 3 s, s = 36 − 18 = +18 m.
Step 3 — Solve: displacement = +10 m; distance = 18 + (18 − 10) = 26 m. The student omitted the acceleration contribution. After reversal, displacement is the signed net change in position; distance adds the outward and return path lengths.
CHALLENGE — The Einstein Sequence
DOK 2 — ApplySequence the Skateboard Solution
A skateboard has initial velocity +3 m/s and constant acceleration +2 m/s² for 5 s on a straight track. Right is positive. Arrange the six linked steps to find signed displacement and check the result. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Einstein’s Insight — doubling fall time
Release an object from rest near Earth, neglect air resistance and assume uniform g = 9.8 m/s². Downward positive gives s = ½gt². After 1 s: 4.9 m; after 2 s: 19.6 m. Doubling time quadruples displacement in this particular from-rest model. It is not a general rule when the initial-velocity term is non-zero.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your 10-year-old friend knows a skateboard’s starting velocity, constant acceleration and elapsed time, but panics because final velocity is missing.
Explain how to find its signed displacement without needing final velocity, why both terms matter, and why a reversal makes distance different. Use at least three short sentences, or draw and label your explanation.
Type Your Explanation (≥ 3 sentences)
Draw and label a straight-track journey or velocity–time area. Show how initial motion and constant acceleration combine. Add at least three purposeful strokes. This checks effort; it does not mark the physics.
Cyan pen selected.
10 · THE CREST VAULT DOK 1 — Consolidate
Final reward below
Hidden exam secrets inside — Crest's free notebook.
📓 PHYSICS CREST — Secret Notebook
DOK 1–2 — Review 🏃Mission 2.6 — The "No Final Velocity" Equation
"The P.E. Class 100m Sprint" 🏃🏁
🌍 OVERVIEW: The No-Final-Velocity Equation
s = vᵢt + ½at². Signed displacement s / m; initial velocity vᵢ / (m/s); acceleration a / (m/s²); elapsed time t / s.
From v = vᵢ + at: the signed velocity–time area is ½(vᵢ + v)t = vᵢt + ½at².
vᵢ = 0 → s = ½at²; a = 0 → s = vᵢt. Final velocity is omitted, not assumed zero.
At a reversal, add the separate path lengths for distance. s is the signed net change in position.
For free fall, choose an axis and use signed a = ±g only when gravity is uniform and air resistance negligible. Downward-positive release from rest: s = ½gt².
When you know vi, a, and t — but you DON'T know the final velocity (vf) — use this equation to find signed displacement s:
s = vᵢ·t + ½·a·t²
This is Key #2 of the four kinematic equations.
1. The Formula — What Each Letter Means
- s = signed displacement (m): change in position along the chosen axis.
- vᵢ = signed initial velocity (m/s), including its direction.
- a = signed acceleration (m/s²): rate of change of velocity. This relation requires a constant value over the interval.
- t = time (s) — how long the motion lasts.
- NOT USED: vf (final velocity) — that's the whole point!
2. The Two Terms Explained
The equation has TWO additive terms — they are the two signed contributions to the net displacement:
- Term 1: vᵢ·t — the displacement contribution from its initial velocity (if there were no acceleration). It's the "constant-velocity displacement contribution."
- Term 2: ½·a·t² — the displacement contribution due to acceleration; it can be positive or negative depending on the sign of a. It's the "acceleration contribution" — and it grows with time SQUARED.
- Total: s = (vit) + (½at²). The two signed terms add algebraically!
3. When vi = 0 (Starting from Rest)
If the object starts from rest (vi = 0), then vit = 0·t = 0. The first term VANISHES!
s = ½·a·t² (the simplified version)
This is what we used in the 100m sprint: vi=0, a=2, t=10 → s = ½(2)(100) = 100 m.
4. When a = 0 (Constant Velocity)
If there's no acceleration (a = 0), then ½at² = ½(0)t² = 0. The second term VANISHES!
s = vᵢ·t (just velocity times time)
For constant velocity, signed displacement equals velocity × time. Distance equals speed × time over this no-reversal interval.
5. When to Use This Equation (Decision Tree)
Use s = vᵢt + ½at² when ALL of these are true:
- You know vᵢ (or it's zero — starting from rest).
- You know a (or it's zero — constant velocity).
- You know t.
- You want to find s, or rearrange for a known-data problem. Solving for t can require a quadratic and selection of physically valid t ≥ 0.
- You DON'T need to know vf (final velocity).
Common scenarios: sprints from rest, free fall (drop an object), car acceleration tests, rolling objects on ramps.
6. The Four Kinematic Equations — Comparison Table
| # | Equation | Name | Skips |
|---|---|---|---|
| 1 | s = ½(vi + vf)t | "No Acceleration" | a |
| 2 | s = vᵢt + ½at² | "No Final Velocity" ★ | vf |
| 3 | vf² = vi² + 2as | "No Time" | t |
| 4 | vf = vi + at | "No Displacement" | s |
Golden Rule: these four useful relations all require constant acceleration in a straight line. Select the relation matching the givens; the list is not exhaustive.
🚨 CREST EXAM SECRETS
🔑 EXAM TRAP #1: The "Always-Need-vf" Myth
Some students panic when a problem doesn't give them vf.
- The Trap: "I can't find displacement without final velocity!"
- The Truth: You CAN! s = vᵢt + ½at² doesn't use vf at all. That's why it's called the "no final velocity" equation.
🔑 EXAM TRAP #2: The "Rest-Only" Myth
Some students think s = vᵢt + ½at² only works when vi = 0.
- The Trap: "This equation is only for objects starting from rest."
- The Truth: The equation works for ANY vi! The vit term handles non-zero initial velocities. If vi ≠ 0, BOTH terms matter.
⚠️ COMMON MISTAKE: Forgetting Both Terms
When vi ≠ 0, students often forget the vit term and only compute ½at².
- Common mistake: forgetting the initial-velocity contribution when vᵢ and t are non-zero.
- Correct method: use both signed terms; a term vanishes only when one of its factors is zero. Square time before multiplying.
🌍 REAL-WORLD APPLICATIONS
- Sprint analysis: A sprinter accelerating from the blocks — find the displacement they run in a given time.
- Free fall (drop): An object dropped from rest falls s = ½gt² (where g = 9.8 m/s²).
- Car track tests: use an idealized constant-acceleration model with a stated initial velocity and time.
- Rocket model: a short straight segment with assumed constant net acceleration; actual rocket acceleration can vary.
- Straight ramp model: use only over an interval where net acceleration can be treated as constant.
🧠 MEMORY TRICKS
- "No vf in the formula = no vf needed!" The equation s = vᵢt + ½at² literally has no "vf" written in it — that's the giveaway.
- Two contributions, one net shift: add the signed initial-velocity and acceleration contributions to get displacement.
- "Rest makes it simple:" If vi = 0, the equation shrinks to s = ½at². Half of a times t-squared.
- Free-fall memory: release from rest, uniform gravity, negligible air resistance, downward positive → s = ½gt².
✅ CREST CHECKLIST (memorize!)
- s = vᵢt + ½at² is the "no final velocity" equation — Key #2 of 4.
- Two terms: vit (velocity part) + ½at² (acceleration part).
- vi = 0 → s = ½at² (only the acceleration term).
- a = 0 → s = vit (only the velocity term — classic s = rt).
- Both terms matter when both vi and a are non-zero.
- Use when you know vi, a, t — and don't need vf.
- Free fall: choose an axis, use signed a = ±g, and neglect air resistance. Only a release from rest has vᵢ = 0.
- From rest under non-zero constant acceleration, displacement magnitude grows with t². Non-zero vᵢ also contributes a term proportional to t.
✨ Bonus Wonder — one, then four
For the same non-zero constant acceleration from rest, doubling elapsed time multiplies displacement magnitude by four. With a non-zero initial velocity, both a time term and a time-squared term contribute.
↗ t × 2 → |s| × 4
from rest · same constant a
— Crest ✨
"No vf in the formula? No vf needed!"
Mission 2.6 Complete! · All 10 levels cleared · Physics Crest
You've earned the rank of Master of the No-Final-Velocity Equation.
s = vᵢt + ½at² — mastered. No final velocity? No problem!