WONDER — The Mystery
The Drifting Rescue
A rescue boat heads straight across an 80 m river at 4 m/s relative to the water. The water flows downstream at 3 m/s relative to the ground. Why does the boat arrive downstream even though its bow remains pointed across?
Model: Uniform downstream current, constant boat velocity straight across relative to water and parallel stationary banks. Across is upward on the diagram; downstream is right. AP Physics 1 assesses relative-velocity addition in one dimension; the two-dimensional applications here are enrichment for that course.
PREDICT — Commit to Your Answer
DOK 2 — PredictA boat crosses a calm river in 20 s. The current now flows faster, purely downstream. Its velocity straight across relative to the water and the river width remain unchanged. What is the new crossing time?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Crossing time pairs the across displacement with the across component of ground velocity. A purely downstream current adds no across component, so the time remains 20 s.
▶ PLAY — River Crossing Simulator
DOK 2 — InvestigatePredict, measure and compare
Measure a same-boat, same-width pair with different currents. Then change only boat speed from one of that pair. Finish at least three distinct complete crossings.
Point the boat straight across relative to water. Uniform velocities, parallel banks, no collisions before reaching the far bank. Position axes use equal metre scales, fixed for the trial; only elapsed motion is drawn. Crossing ends exactly at the far bank.
Status: Ready
Playback: 4 simulation seconds per real second. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — The Golden Rules
DOK 1 — RecallFlip all 3 rule cards. Keep the quantities and model conditions clear.
Rule 1
Name the frames
Click to flip
Name the frames
v⃗BG = v⃗BW + v⃗WG. Boat–ground velocity is boat–water plus water–ground velocity. Add vectors, not their magnitudes. Perpendicular components give a resultant magnitude by Pythagoras.
Rule 2
Match crossing direction
Click to flip
Match crossing direction
t = width / across ground-velocity component. In the straight-across model, the current contributes zero across velocity, so this component equals the boat’s speed through the water.
Rule 3
Share elapsed time
Click to flip
Share elapsed time
Downstream displacement is current × the same elapsed time. A faster purely downstream current changes drift, not crossing time, when width and the boat’s across component remain fixed.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Crossing time is the river width divided by the diagonal ground-speed magnitude.”
Correct — the claim is false.
False. Width is an across displacement. Divide by the across component of ground velocity. The diagonal magnitude instead pairs with distance along the straight ground path.
Myth 2: “An aircraft’s airspeed indicator directly gives its ground speed.”
Correct — the claim is false.
False. Airspeed is referenced to the surrounding air. Ground velocity also depends on the wind velocity relative to ground. This ideal calculation uses the given airspeed vector; instrument corrections are outside the mission.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Across and Downstream Clocks
DOK 2 — ApplyThe components share one elapsed time. Answer all four instructor questions. Support explains a method after an attempt; a correct answer is still required.
Instructor Q1 — Crossing Direction
Which quantity determines crossing time in the straight-across model?
Instructor Q2 — Cancel the Drift
The boat’s speed through the water is greater than current speed. To land directly opposite, which direction should its bow point?
Instructor Q3 — Downstream Observation
A boat travels straight across at 5 m/s relative to water. Current is 3 m/s downstream; river width is 100 m. Find its downstream displacement on reaching the far bank.
Instructor Q4 — Ground-Speed Magnitude
A boat moves at 4 m/s straight across relative to water; current is 3 m/s downstream. Find the boat’s ground-speed magnitude.
4/4 — Instructor Questions Completed
Reference frames identify the velocities; matching directions identifies the calculation.
✎ PRACTICE — Reference Frames in Action
DOK 1–3 — PracticeChallenge 1: Storm Chaser Aircraft
An aircraft has velocity 144 km/h south relative to the air. Wind velocity is 60 km/h west relative to the ground. Both remain constant and perpendicular. Find the aircraft’s ground-speed magnitude.
Step-by-Step Solution
The ground components are 144 km/h south and 60 km/h west. Their perpendicular resultant has magnitude √(144² + 60²) = 156 km/h.
Challenge 2: Coast Guard Crossing
A boat moves straight across relative to water at 7 m/s. The uniform downstream current is 2.5 m/s relative to ground. The river is 126 m wide with parallel stationary banks. Find the crossing time and downstream displacement at the far bank.
Step-by-Step Solution
The across component is 7 m/s, so T = 126/7 = 18 s. Downstream drift is 2.5 × 18 = 45 m.
Challenge 3: Audit the Rescue Report
A rescue boat has velocity 6 m/s straight across relative to water. Current is 8 m/s downstream relative to ground. River width is 90 m. A student reports: (i) ground-speed magnitude is 6 + 8 = 14 m/s; (ii) crossing time is 90/14 ≈ 6.43 s; (iii) downstream displacement is 6 times that crossing time. Calculate the correct ground-speed magnitude, crossing time and downstream displacement. Explain all three report errors. Assume uniform velocities and parallel stationary banks.
Step-by-Step Solution
Vector magnitude: the perpendicular components cannot be added as scalars. Ground speed is √(6² + 8²) = 10 m/s.
Crossing clock: use the across component 6 m/s with width 90 m, so T = 15 s.
Drift component: downstream velocity is the current, 8 m/s. Thus drift is 8 × 15 = 120 m.
☷ CHALLENGE — Compare the Drift Fraction
DOK 2 — ApplyCompare the Drift Fraction
For this straight-across model, categorize each setup using drift/width = current speed/across speed. Select a card, then its target. A category can hold several cards.
0 / 6 correct
Physics Insight
At fixed width, the drift fraction is set by downstream current speed divided by across boat speed.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: A younger sibling says a faster downstream current makes a straight-across crossing take forever. Explain the conditions under which crossing time stays unchanged and describe what happens to downstream drift and ground speed.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.12 — Relative Velocity & Riverboat Problems
Name the frames. Match the directions.
1. Always name the reference frames
Use B for boat, W for water and G for ground. Velocity is a vector and must be relative to a named observer.
v⃗BG = v⃗BW + v⃗WG
The boat–water velocity describes propulsion through water. Water–ground velocity describes the current. Their vector sum is what an observer on the bank measures. Magnitudes may be added directly only when the vectors point in the same direction.
2. Keep the directions separate
| Quantity | Across | Downstream |
|---|---|---|
| Ground velocity | Boat across speed b | Current speed c |
| Displacement at t | bt | ct |
| At far bank | Width w | Drift cT |
For the straight-across model, T = w/b. Ground-speed magnitude is √(b² + c²). Both component equations use the same elapsed time. River width is not distance along the diagonal ground path.
Example: b = 5 m/s, c = 2 m/s and w = 85 m give T = 17 s and drift = 34 m. Increasing only c changes drift and the ground-speed magnitude, while T remains 17 s.
3. The statement has conditions
Current must be purely downstream and uniform; the boat’s velocity straight across relative to water must remain unchanged; width and bank geometry must be fixed. If heading, across velocity or the flow pattern changes, the crossing time may change. Do not claim that current can never affect crossing time.
4. Heading upstream
To land directly opposite, an upstream component of boat–water velocity must cancel the current. For through-water speed u and upstream angle α measured from straight across, u sin α = c and the across speed is u cos α = √(u² − c²).
A finite crossing is possible under this constant-speed model only when u > c. At u = c, cancellation consumes the entire velocity and leaves zero across motion. At u < c, the current cannot be fully cancelled. Counter-steering generally increases the crossing time compared with straight-across heading at the same through-water speed.
5. Aircraft and one-dimensional motion
Aircraft–ground velocity equals aircraft–air velocity plus air–ground wind velocity. A tailwind adds along the heading; a headwind subtracts. Crosswinds require vector components. Airspeed and ground speed describe different frames.
For a one-dimensional example, choose east positive. A train travels +18 m/s relative to ground while a person walks −1.5 m/s relative to the train. The person’s ground velocity is +16.5 m/s. The signs encode the directions.
6. Scope and measurement
The official AP Physics 1 relative-motion boundary restricts velocity addition and subtraction to one dimension. Its vector-component skills support the diagrams, but the two-dimensional riverboat and aircraft applications here are AP enrichment. The AS syllabus includes addition, subtraction and perpendicular components of coplanar vectors.
The simulator plots equal metre scales and uses exact constant-velocity expressions. Playback may run faster than real time; the displayed elapsed time is the physical model’s time. Pause and Step allow measurements. The trail ends at the far bank and never wraps. Changing a given starts a fresh trial; repeated identical givens add no distinct credit.
Finish a matched pair changing only current, then a trial changing only boat speed from that pair. The comparison isolates which variable changes crossing time and which changes drift. Presets only load givens; complete the crossing to record evidence.
✓ Crest’s Checklist
- I name every reference frame.
- I add velocity vectors with correct directions.
- I pair across width with across ground velocity.
- I use the same elapsed time for downstream drift.
- I state the straight-across model conditions.
- I distinguish AP core scope from enrichment.
— Crest ☆ “Name the frames. Match the directions.”
Mission 3.12 Complete! · All 10 levels cleared · PHYSICS CREST
★ Relative Velocity Master
Reference frames identify the velocities; matching directions identifies the calculation.