WONDER — The Mystery
The Sudden Speed-Up
A cart is already sliding right. A 50 N rightward push balances 50 N leftward kinetic friction, so its speed is steady. The push increases to 80 N. Why does its velocity begin changing?
Model: Constant horizontal forces on a box already sliding right; no other vertical forces and no vertical acceleration. Uniform g = 9.8 m/s². +x right. A right-sliding kinetic-friction calculation ends at the first stop. Coefficient calculations are AP content; AS friction is qualitative.
PREDICT — Commit to Your Answer
DOK 2 — PredictA box slides right with 100 N applied right and 40 N kinetic friction left. What is the signed net horizontal force, taking right positive?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The signed vector sum is +100 + (−40) = +60 N. Acceleration has the direction of that net force.
▶ PLAY — Sliding Box: Net Force to Motion
DOK 2 — InvestigatePredict, measure and compare
Complete a matched pair changing only friction magnitude, then change only mass from one of that pair. Predict signs of net force and acceleration before each run.
The box starts sliding right. Applied force is right; the given kinetic-friction magnitude acts left. Its value is specified independently of mass for each setup. Runs end at 3 s or the first stop, whichever comes first; subsequent static friction is outside this lab.
Status: Ready
Playback: 1 simulation seconds per real second. Pause or Step for measurements.
Velocity vs Time
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — The Three-Step Plan
DOK 1 — RecallFlip all 3 rule cards. Keep the quantities and model conditions clear.
Rule 1
Find normal force
Click to flip
Find normal force
On a horizontal floor with no other vertical forces and no vertical acceleration, N = mg. An angled pull or a different surface geometry needs its own vertical force balance.
Rule 2
Identify sliding friction
Click to flip
Identify sliding friction
For the coefficient model, Fₖ = μₖN. Its direction opposes relative sliding. When kinetic-friction magnitude is supplied directly, use that given force; do not calculate a second friction force.
Rule 3
Use the net force
Click to flip
Use the net force
With rightward sliding, a rightward applied force and leftward friction, ΣFₓ = Fapp − Fₖ and a = ΣFₓ/m. Acceleration can be positive, zero or negative while velocity is still rightward.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A sliding box always has friction equal to the applied force.”
Correct — the claim is false.
False. The two horizontal forces balance only for zero horizontal acceleration in this simple geometry. Different magnitudes give a nonzero net force.
Myth 2: “Acceleration is applied force divided by mass even when friction also acts.”
Correct — the claim is false.
False. Newton’s second law uses the signed sum of all external forces, not one selected applied force.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Reverse Engineering the Surface
DOK 2 — ApplyUse a right-sliding horizontal box, a rightward push and leftward kinetic friction. Find net force first, then identify the missing contact force.
Instructor Q1 — Net Force
Mass and acceleration are known. Which expression gives net force?
Instructor Q2 — Missing Friction
With right positive, Fnet = Fapp − Fₖ. Which relation finds the friction magnitude?
Instructor Q3 — Measured Acceleration
A 15 kg box accelerates right at 1.6 m/s². Find the signed net horizontal force, with right positive.
Instructor Q4 — Hidden Coefficient
A 15 kg box slides right under a 75 N rightward push. Its acceleration is +1.6 m/s². No other vertical forces act. Use g = 9.8 m/s². Find μₖ.
4/4 — Instructor Questions Completed
Acceleration follows net external force, and a kinetic-friction model must be reconsidered at a stop.
✎ PRACTICE — Find Motion and Audit the Model
DOK 1–3 — PracticeChallenge 1: The Luggage Cart
A 42 kg cart is sliding right on a horizontal floor. A horizontal 180 N push acts right. μₖ = 0.18; no other vertical forces act. Use g = 9.8 m/s² and +x right. Find the signed acceleration while it is sliding right.
Step-by-Step Solution
N = 411.6 N; friction = 74.088 N left. Net force = +105.912 N. Acceleration = 105.912/42 ≈ +2.522 m/s².
Challenge 2: The Mystery Floor
A 16 kg box slides right on a horizontal floor under a 90 N rightward push. Its measured acceleration is +2.4 m/s². No other vertical forces act. Use g = 9.8 m/s² and +x right. Find the kinetic coefficient of the surface pair.
Step-by-Step Solution
Net force = 16 × 2.4 = 38.4 N right. Friction = 90 − 38.4 = 51.6 N left. N = 156.8 N, so μₖ = 51.6/156.8 ≈ 0.3291.
Challenge 3: Audit the Stopping Box
A 12 kg box initially slides right at 5 m/s. A constant 36 N force acts right and kinetic friction of magnitude 60 N acts left while it slides right. Take +x right. A student reports: (i) net force is +96 N; (ii) acceleration is 36/12 = +3 m/s²; (iii) the same right-sliding kinetic-friction model can continue unchanged through a stop and reversal. Find the signed net force, signed acceleration and time to first stop. Explain all three errors and the model boundary.
Step-by-Step Solution
Directions: net force is +36 − 60 = −24 N, not the sum of magnitudes.
Net force: a = −24/12 = −2 m/s². Applied force alone omits friction.
Boundary: first stop is at 0 = 5 − 2t, so t = 2.5 s. At rest, reconsider static friction; a later reversal would also change kinetic-friction direction. Do not extend the right-sliding model unchanged.
☷ CHALLENGE — The External-Pull Sequence
DOK 2 — ApplyThe External-Pull Sequence
A 200 kg sled is the chosen system. Two teams outside the system pull it: 500 N right and 400 N left. It already slides right; kinetic friction on the sled is 50 N left. Arrange one valid six-step workflow. Select a card, then a numbered slot.
0 / 6 correct
Physics Insight
The teams are outside the sled system. Their pulls are external forces on the sled; internal interactions within a chosen system cancel in its force sum.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: A sibling asks why a toy car speeds up under a stronger push instead of instantly reaching a new steady speed. Explain balanced versus unbalanced forces, the direction of acceleration and why velocity changes over time. Use any analogy as an analogy, then state the real force rule.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.15 — Friction & Acceleration
Add forces with signs. Then find acceleration.
1. Add forces, then divide
Choose a positive direction and identify the object or system. Add all external force components with signs. Newton’s second law uses this net force.
ΣFₓ = Fapp − Fₖ
aₓ = ΣFₓ/m
This subtraction applies to the stated geometry: box sliding right, applied force right, kinetic friction left. In another geometry, build the signed sum again instead of memorizing the minus sign.
2. When a coefficient is supplied
For a horizontal floor with no other vertical forces and no vertical acceleration, N = mg. The dry-sliding model gives Fₖ = μₖN. If friction magnitude is already supplied, use that force rather than inventing another coefficient calculation.
Example: a 55 kg right-sliding box under a 150 N push with μₖ = 0.15 has N = 539 N and friction = 80.85 N. Net force = +69.15 N and acceleration ≈ +1.257 m/s².
3. Acceleration is not velocity
Positive velocity with positive acceleration means speed increases right. Positive velocity with zero acceleration means constant rightward velocity. Positive velocity with negative acceleration means slowing while still moving right.
For constant acceleration while that contact state lasts, v = u + at and Δx = ut + ½at². Do not say that leftward acceleration instantly means leftward motion.
4. Stop at the contact-state boundary
If a < 0 and initial rightward speed is u > 0, first stop is at tstop = −u/a. The right-sliding kinetic-friction model is valid only up to that event. At rest, a static-friction condition is needed. If sliding later reverses, friction reverses too.
The simulator ends at 3 s or the first stop. It reports the limiting sliding acceleration at the endpoint; acceleration after contact stops is not determined by this model. It does not wrap the box or run a fixed friction direction through reversal.
5. Reverse engineering
For the stated right-sliding horizontal case, measured acceleration gives ΣFₓ = ma. Then Fₖ = Fapp − ma and μₖ = Fₖ/(mg). A calculated negative friction magnitude signals an inconsistent assumed direction, missing force or erroneous data.
Example: mass 14 kg, rightward applied force 70 N and acceleration +2 m/s² give friction 42 N and μₖ = 42/137.2 ≈ 0.306. The coefficient is dimensionless.
6. Define the system
Two teams pulling a sled exert external forces on the sled alone. If the system instead includes both teams, interactions between those teams and internal rope segments are internal; do not add them as external drives on that whole system. External ground interactions must be considered for the people-plus-rope system.
7. Read the motion lab
Applied force, given kinetic friction, mass and initial speed are independent setup values. Holding friction force fixed while changing mass changes the implied μₖ = Fₖ/(mg); it does not represent the same surface coefficient. The readout makes that distinction explicit.
The force diagram shows actual interactions. Position and velocity plots show elapsed motion with labelled scales fixed during the trial. Pause or Step for measurements. Presets load givens without credit. Finish a matched friction pair and a mass comparison to see how force and inertia affect acceleration.
AS requires net-force calculations and qualitative friction. Coefficient calculations are the AP Physics 1 part of this mission.
✓ Crest’s Checklist
- I define the system and positive direction.
- I add all external forces with signs.
- I use net force rather than applied force in F = ma.
- I distinguish acceleration from velocity direction.
- I stop or update the contact model at rest.
- I distinguish supplied friction force from a fixed coefficient.
— Crest ☆ “Add forces with signs. Then find acceleration.”
Mission 3.15 Complete! · All 10 levels cleared · PHYSICS CREST
★ Friction & Acceleration Master
Acceleration follows net external force, and a kinetic-friction model must be reconsidered at a stop.