WONDER — The Mystery
The Blindfolded Treasure Mystery
A friend starts in the centre of the courtyard. You say, “Walk straight for 20 metres.” The friend can obey that instruction and still miss the treasure. What information is missing?
Today’s conventions: East is +x and North is +y. Standard planar angles are measured counterclockwise from East; a navigator phrase starts from the direction after “of”. These are stated conventions, not a universal rule for every diagram. A nonzero vector needs magnitude and direction; the zero vector has no unique direction.
Today’s Mission: distinguish scalars from vectors, interpret signed components, and draw vectors to a chosen scale. The AP core is one-dimensional scalar/vector description; the planar construction work extends it.
PREDICT — Commit to Your Answer
DOK 2 — PredictWhich named quantity on this dashboard is a vector, even though its displayed value omits direction?
Classify the quantity itself, using its definition.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction: B) displacement is a vector.
Displacement describes the change from a starting position to an ending position. Its nonzero value needs direction as well as magnitude. “Displacement: 30 m” is therefore an incomplete vector description; it does not turn displacement into a scalar. Distance and speed are scalars.
The units do not settle the classification: distance and displacement both use metres, while speed and velocity both use m/s.
▶ PLAY — The Vector Drawer
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: set magnitude and standard angle, or set signed East/North components. Choose a paper scale. Play or step to construct the vector.
- • OBSERVE: the arrow length represents magnitude; its orientation represents direction. Negative components indicate direction along an axis, not a negative magnitude.
- • DISCOVER: inspect a zero vector, opposite directions and two component signs. Complete three different constructions, including a nonzero one.
East is +x, North is +y and angles are counterclockwise from East. The fixed map grid is labelled in metres. Paper length is calculated separately from your chosen scale; do not measure centimetres on the screen. Playback constructs a diagram — it is not a flight or speed simulation. Calculated controls are disabled and labelled. Presets do not start playback or earn completion by themselves.
Reading the diagram: the cyan arrow is the portion constructed so far. Grey dashes show the complete target and its projections. The map axes stay fixed in metres. A zero vector is a labelled point; it has no unique direction.
Status: Ready
Live Readouts
Try these experiments
Choose a preset, predict its arrow, then press Play.
0 / 3 distinct constructions completed
DISCOVER — The Golden Rules
DOK 1 — RecallFlip all four cards to distinguish quantity type, magnitude, direction and drawing scale.
Rule #1
Two families of quantities
Click to flip
Two families of quantities
Scalars need no spatial direction: distance, speed, mass and time. Nonzero vectors need magnitude and direction: displacement, velocity and force. Omitting direction leaves a nonzero vector incompletely specified.
Rule #2
Magnitude and signed values
Click to flip
Magnitude and signed values
Vector magnitude is non-negative. A negative component can encode a direction relative to a chosen axis. Scalar values can also be negative, such as Celsius temperature. A minus sign alone does not classify the quantity. The zero vector has no unique direction.
Rule #3
State the angle convention
Click to flip
State the angle convention
Here standard angles start at East and increase counterclockwise: N = 90°, W = 180°, S = 270°. In “α North of West”, start at West and turn toward North. A clockwise bearing from North is a different convention; use the one stated in the question.
Rule #4
Scale and arrowhead
Click to flip
Scale and arrowhead
If 1 cm represents s metres, paper length = magnitude/s, in cm. A nonzero vector is drawn from tail to tip with an arrowhead showing direction. Distance is path length; displacement is the start-to-finish change. A return to the start has zero displacement, even with nonzero distance.
All four rules explored. Keep quantity type, signed value, magnitude and direction distinct.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth #1: “Two carts moving at 14 m/s in opposite directions have the same velocity.”
Correct — the claim is false.
Their speeds are equal, but their velocities differ because direction is part of velocity. The units m/s are shared; the definitions differ.
Myth #2: “A negative horizontal component means the vector has a negative magnitude.”
Correct — the claim is false.
With East positive, a westward horizontal component is negative. Its vector magnitude is 18 m, which is non-negative. The minus sign describes direction along the chosen axis, not a negative arrow length.
Both claims corrected. Magnitude is non-negative; direction can differ even at equal speed.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyAnswer two multiple-choice and two numerical vector-description questions. Standard angles are counterclockwise from East. Numerical length answers use the stated paper unit; angle answers may include degrees. Guides appear after an attempt; all four correct answers are required.
Your vector toolkit
Question progress
Waiting for Q1...
Instructor Q1 — Scalar Description
The display shows mass = 5 kg. Which describes mass?
Instructor Q2 — Zero Vector
The displacement vector has magnitude zero. Which statement is correct?
Instructor Q3 — Drawing Length
A 45 m displacement is due North. Use a paper scale of 1 cm representing 9 m. Find the drawing length in cm.
Instructor Q4 — Convert a Direction
Convert “25° South of West” to a standard angle measured counterclockwise from East, in degrees.
4/4 — Vectors and Scalars Mastered!
You distinguished quantity types and translated scale and direction. Apply the ideas independently.
✎ PRACTICE — Vector Description and Drawing
DOK 1–3 — PracticeChallenge 1: The Westward Change
A displacement is 28 m due West. East is the positive x direction. Find its signed horizontal component in metres.
Step-by-Step Solution
Direction: West is opposite the positive East axis.
Component: x = −28 m. The magnitude is 28 m.
Challenge 2: Plan the Scaled Arrow
Draw a displacement of 88 m, directed 35° South of West, using a paper scale of 1 cm representing 8 m. Enter the required arrow length in cm and its standard angle measured counterclockwise from East.
Step-by-Step Solution
Paper length: 88 ÷ 8 = 11 cm.
Direction: start at West, 180° standard, then turn 35° toward South. The standard angle is 180° + 35° = 215°.
Draw: an 11 cm arrow at 215° counterclockwise from East, with an arrowhead at the tip. Label its physical magnitude 88 m.
Challenge 3: Audit the Student Drawing
A task asks for a 72 m displacement at a standard angle of 140°, counterclockwise from East. The paper scale is 1 cm representing 6 m. The student instead starts at North, turns 140° clockwise and labels the vector’s magnitude “−72 m”. Find the student’s actual standard direction, and the correct paper length for the requested vector. Explain all three errors in the student’s method and label.
Step-by-Step Solution
Student direction: North is 90° standard. A 140° clockwise turn gives 90° − 140° = −50°, equivalent to 310° standard. The arrow points into the South-East quadrant.
Correct paper length: 72 ÷ 6 = 12 cm.
Error 1: the task’s standard reference is East, not North.
Error 2: the task requires counterclockwise rotation, not clockwise. The intended 140° direction is in the North-West quadrant.
Error 3: vector magnitude is non-negative. The magnitude is 72 m; a minus sign may describe a component after an axis is chosen, not the magnitude.
☷ CHALLENGE — Rebuild a Vector Construction
DOK 2 — ApplySix Linked Steps from Description to Arrow
Use this construction procedure for a displacement of 96 m at 50° North of West, with a paper scale of 1 cm representing 12 m. Arrange the six linked steps: read the givens, interpret and convert the direction, align a ray, measure along it, and finish the vector. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Physics Insight — A Picture Can Encode a Quantity
The arrow carries two kinds of information: length encodes magnitude through a scale, and orientation encodes direction through a convention. Neither number alone specifies a nonzero vector.
The diagram’s paper length is not the vector’s physical magnitude. Changing the drawing scale changes centimetres on paper while the described physical vector stays the same.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your younger sibling says that setting an arrow’s strength is enough to hit a target. Explain what directional information is missing and how a scaled arrow represents a vector.
Distinguish a scalar from a vector, explain magnitude and direction, and separate a negative component from a negative magnitude. Type at least three short sentences, or draw a labelled explanation with at least three purposeful strokes. Exact keywords are not required.
Type Your Explanation (≥ 3 sentences)
Draw and label a scaled vector with a stated direction convention. Include an example of a scalar or a signed component. Use at least three purposeful strokes. This checks effort; compare the physics with the Vault.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.1 — Vectors & Scalars
Magnitude tells size; direction completes the vector.
Nonzero vector: magnitude + direction, with units.
Vector magnitude R ≥ 0.
Paper length / cm = R / (metres represented by 1 cm).
Here: East = 0°, North = 90°, West = 180°, South = 270°.
Standard angles increase counterclockwise from East.
Components: x = R cos θ; y = R sin θ.
R = √(x² + y²); use both component signs to find direction.
Zero vector: x = y = 0; no unique direction.
1. Scalars and vectors describe different information
A scalar is described without a spatial direction, commonly summarised as “magnitude only”. Examples are distance, speed, mass, time, temperature and energy. A scalar numerical value can be negative where its definition and reference allow it, such as Celsius temperature. A minus sign is not a test for vector classification.
A nonzero vector needs magnitude and direction. Displacement, velocity, acceleration, force and momentum are examples. A missing direction makes a nonzero vector description incomplete; it does not make the quantity a scalar.
| Pair | Scalar | Vector |
|---|---|---|
| Motion change | Distance: total path length | Displacement: start-to-finish change with direction |
| Rate of motion | Speed: magnitude of velocity | Velocity: magnitude and direction |
| Signed information | −5°C can be a scalar temperature | x = −18 m can be a westward component when East is positive |
2. Magnitude, component and zero are different ideas
The magnitude of a vector is non-negative. It can be zero, but not negative. Components are signed numbers relative to chosen axes. For a westward displacement in an East-positive system, the horizontal component is negative and the magnitude remains positive.
The zero vector still belongs to the vector family, but has no unique direction. Both components are zero. A diagram can show it as a labelled point rather than inventing an East- or North-pointing arrow.
3. Direction conventions must be stated
This mission uses standard angles counterclockwise from East: 0° or 360° is East, 90° is North, 180° is West and 270° is South. A clockwise bearing from North is another convention and gives different angle numbers for the same arrow.
In a phrase such as “α North of West”, begin at the direction after “of” — West — and turn toward North. Then translate the resulting orientation into the angle convention requested. Do not switch the reference direction or rotation sense midway.
4. Scaled drawings encode physical magnitude
If 1 cm represents s metres, divide the physical magnitude in metres by s to find paper length in centimetres. Draw that length in the chosen direction, add an arrowhead at the tip and label the physical magnitude and direction. Paper centimetres and physical metres describe different things.
The simulator’s fixed map grid is labelled in metres. Its separate paper-length readout shows the planned scale drawing. A centimetre measured on a screen is not automatically a centimetre of the planned paper drawing.
5. Perpendicular components — planar work
With East as +x and North as +y, x = R cos θ and y = R sin θ when θ is the standard angle. The components reconstruct the magnitude through R = √(x² + y²). Use both signs to place the vector in the correct quadrant; a simple inverse tangent ratio alone can lose quadrant information.
For R = 0, both components are zero and an angle is undefined. The component representation is within AS/A Level vector work. AP Physics 1’s opening scalar/vector topic is one-dimensional; the planar angle and component treatment here is an extension.
6. Distance and displacement are not interchangeable
Distance adds the lengths of the travelled path. Displacement compares the final position with the initial position. Returning to the start gives zero displacement while distance can be nonzero. Two routes can have the same displacement and different distances.
Crest’s Exam Secrets
Classify the quantity, not its units
Distance and displacement share metres; speed and velocity share m/s. Their definitions decide whether direction is required.
Do not erase a vector by omitting direction
A nonzero value such as “velocity = 12 m/s” is incomplete, while “speed = 12 m/s” is a complete scalar speed.
Magnitude is not a signed component
A negative x component can indicate West. It is not a negative vector magnitude or a negative paper length. Negative scalar values can also exist.
Check reference, rotation and scale
Read the direction convention and scale before drawing. Use the correct reference axis, turn in the required sense, measure the planned paper length and add a tip arrowhead.
Memory hooks
- Scalar: no spatial direction required.
- Nonzero vector: size and direction.
- Magnitude is non-negative; components can have signs.
- Start after “of”; turn toward the direction before it.
- Paper scale changes drawing length, not the physical vector.
✨ Bonus wonder — a zero vector is still a vector
Every arrow direction gives the same point when its length becomes zero. That is why the zero vector has no unique angle. Its two components remain zero, and its classification remains vector; the missing unique direction is a special zero case, not a conversion to a scalar.
✓ Crest’s Checklist
- I classify a quantity from its definition.
- I give units and, for a nonzero vector, a direction.
- I keep magnitude separate from signed components.
- I state the angle convention.
- I distinguish map coordinates from paper length.
- I recognise the zero vector and the limits of its direction.
— Crest ✨ “Size tells how much. Direction tells where.”
Mission 3.1 Complete! · All 10 levels cleared · PHYSICS CREST
Master of Vectors and Scalars
Vectors, Scalars, and Direction — mastered. The treasure map is decoded!