WONDER — The Mystery
Fido’s Two-in-One Pull
Fido stands below and to the left of his handler. The taut leash pulls Fido’s collar toward the handler with a tension of 40 N at 35° above +x. How can one diagonal force be represented by horizontal and vertical components without adding two extra forces?
Conventions: +x is right and +y is up. Standard angles increase counterclockwise from +x. A different reference axis will always be stated. Components keep the units of their original vector.
Today’s Mission: resolve one vector onto perpendicular axes, choose the correct trigonometric projections, retain their signs, and check that they reconstruct the original vector.
PREDICT — Commit to Your Answer
DOK 2 — PredictA plane’s planned displacement is 5 km North-West. A navigation system can command only North or West displacements. Which route reaches the same endpoint?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction: C. Reason 2.
A 5 km North-West displacement has equal component magnitudes: 3.54 km North and 3.54 km West. Placing those two displacement arrows tip to tail reaches the same endpoint as the diagonal.
This is an alternative route with a longer path distance, about 7.07 km. It does not describe the same flight path or velocity at every instant. Components represent the vector; do not add the original diagonal again.
▶ PLAY — The Component Builder
DOK 2 — InvestigateWhat you will DO and OBSERVE
- • DO: choose a velocity magnitude and standard direction. Predict the component signs, then press Play or Step.
- • OBSERVE: cyan is the vector, green is its x projection, and gold is its y projection placed at the x component’s tip. They form an equivalent vector triangle.
- • DISCOVER: compare quadrants, axes and zero. Complete three distinct vectors, including one with a negative component.
Both displays use fixed m/s scales. The construction fraction scales the three arrows together for display. It is not elapsed time or actual acceleration. Grey dashes mark the full target. A preset loads givens; Play or Step must complete the construction. Repeating a vector, or using 0° and 360° for the same direction, earns no extra credit.
Status: Ready
Signed Component Bar Chart
Positive bars extend right of zero; negative bars extend left. Both are velocity components, not separate extra velocities.
Velocity magnitude / m/s; non-negative.
Angle CCW from +x; ignored for a zero vector.
Live Readouts
Equal component magnitudes. Check their signs separately; equality of magnitudes does not always mean equality of signed components.
Try these experiments
Predict the default vector, then complete its construction.
0 / 3 distinct vectors completed
DISCOVER — The Golden Rules
DOK 1 — RecallFlip all four cards to connect projections, angle references, signs and reconstruction.
Rule #1
One vector, equivalent components
Click to flip
One vector, equivalent components
A component is a signed projection onto a chosen axis. The perpendicular x and y component vectors add to the original vector. Components are a replacement representation; they are not two additional physical forces.
Rule #2
Choose the angle reference
Click to flip
Choose the angle reference
For a standard angle θ CCW from +x: Vₓ = V cos θ; Vᵧ = V sin θ. For an acute reference from another axis, identify adjacent and opposite projections first. The component next to that reference uses cosine.
Rule #3
Keep each component sign
Click to flip
Keep each component sign
Standard-angle trig supplies signs automatically. With an acute reference, use the diagram to attach signs. Components retain the original units. Equal magnitudes at diagonal 45° directions can have different signs.
Rule #4
Reconstruct and check
Click to flip
Reconstruct and check
Perpendicular projections obey √(Vₓ² + Vᵧ²) = V. Each component magnitude is at most V. A norm check alone cannot detect swapped components or sign errors. Zero has no unique direction.
All four rules explored. Choose the reference, project, attach signs and check.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth #1: “At 135°, the signed x and y components are equal.”
Correct — the claim is false.
Their magnitudes are equal, but x = −14.14 m/s and y = +14.14 m/s. They are not equal as signed components. At 225° both components are equal and negative.
Myth #2: “The horizontal component always uses cosine, regardless of the stated reference axis.”
Correct — the claim is false.
This angle is 20° right of +y. The vertical component is adjacent, so Tᵧ = 30 cos 20° = 28.19 N. The horizontal component is opposite, so Tₓ = 30 sin 20° = 10.26 N. Both are positive here.
Both claims corrected. The reference axis and component signs determine the representation.
THE SECOND 'AHA!' — Instructor Drill
DOK 2 — ApplyAnswer two multiple-choice and two numerical questions. A question may use force or velocity components; keep the stated units. Guides appear after an attempt. All four correct answers are required.
Your vector toolkit
Question progress
Waiting for Q1...
Instructor Q1 — Reference Axis
A tension of 54 N acts 20° right of +y. Which expression gives its horizontal component?
Instructor Q2 — Signed Pattern
A nonzero velocity is at 310° counterclockwise from +x. Which signed component pattern is correct?
Instructor Q3 — Velocity Projection
A velocity has magnitude 42 m/s at 60° counterclockwise from +x. Find its signed x component in m/s.
Instructor Q4 — Vertical Reference
A tension of 82 N acts 23° left of +y. Find its signed horizontal component in N.
4/4 — Component Skills Mastered!
Now resolve fresh vectors and justify an audit independently.
✎ PRACTICE — Resolve and Audit
DOK 1–3 — PracticeChallenge 1: A Signed Force Projection
A force has magnitude 36 N at 120° counterclockwise from +x. Find its signed horizontal component in N.
Step-by-Step Solution
Fₓ = 36 cos 120° = −18 N. This is a signed component: its magnitude is 18 N toward left.
Challenge 2: Fido’s Vertical Reference
The tension on Fido’s collar is 73 N, directed 28° left of the positive vertical axis. With +x right and +y up, find both signed components in N.
Step-by-Step Solution
The angle is from +y toward left. The horizontal projection is opposite the reference angle; the vertical projection is adjacent.
Tₓ = −73 sin 28° = −34.27 N.
Tᵧ = +73 cos 28° = +64.46 N.
Check: √(Tₓ² + Tᵧ²) = 73 N. The equivalent standard angle is 118° CCW from +x.
Challenge 3: Audit the Component Report
A force of 90 N points 17° below the negative horizontal axis. With +x right and +y up, a student reports Fₓ = +26.3 N and Fᵧ = +86.1 N. They add these to get 112.4 N and claim the original 90 N force cannot exist. Enter both corrected signed components in N. Explain the component assignment, signs and magnitude-check errors. Also explain why a correct magnitude check alone cannot confirm the reported component directions.
Step-by-Step Solution
Assignment: the 17° reference is from the horizontal. The horizontal projection is adjacent and uses cosine; the vertical projection is opposite and uses sine.
Signs: the vector points left and down, so both components are negative.
Fₓ = −90 cos 17° = −86.07 N; Fᵧ = −90 sin 17° = −26.31 N.
Check: use the perpendicular norm, √(Fₓ² + Fᵧ²) = 90 N. Adding the projection lengths does not reconstruct the original magnitude.
Limitation: squaring removes signs, and interchanging x and y leaves their squared sum unchanged. Even the student’s incorrect signed assignment has a norm near 90 N. A magnitude check alone cannot validate the axes or directions; use the reference angle and vector’s quadrant as well.
☷ CHALLENGE — Rebuild the Resolution
DOK 2 — ApplySix Linked Actions
For a velocity of 64 m/s directed 25° right of +y, rebuild this specified diagram-first resolution procedure. Each action uses the diagram or result already produced. Select a card, then a slot; select a filled slot to return it.
Build the solution in order:
Available steps (shuffled — pick one, then click a slot):
Physics Insight — Same Vector, Different Reference
25° right of +y equals 65° CCW from +x. Vₓ = 64 sin 25° = 64 cos 65° ≈ +27.05 m/s. Vᵧ = 64 cos 25° = 64 sin 65° ≈ +58.00 m/s. Both descriptions give the same components.
Rotate the coordinate axes and the component values generally change, while the original vector and its magnitude stay the same. A slope can be easier to describe with axes along and perpendicular to the slope.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: your younger sibling pulls a sled’s rope straight upward, then angles it upward and to the right. Explain how the applied pull’s components change. Explain why the angled pull does not guarantee that the sled immediately moves.
Explain one force and its equivalent components, the role of the angle reference, and why motion also depends on other forces such as friction. Type at least three short sentences, or draw at least three purposeful strokes. Exact keywords are not required.
Type Your Explanation (≥ 3 sentences)
Draw and label the upward and angled pulls, their projections, and the chosen axes. Add a note about other forces. Use at least three purposeful strokes. This checks effort; compare the physics with the Vault.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 3.4 — Vector Components & Resolution
One vector. Two projections. The same physical effect.
+x is right; +y is up.
Standard θ is CCW from +x.
Vₓ = V cos θ; Vᵧ = V sin θ.
These standard-angle expressions include signs.
For an acute reference: adjacent magnitude = V cos α; opposite magnitude = V sin α.
Attach signs from the given direction.
Check: √(Vₓ² + Vᵧ²) = V.
|Vₓ| ≤ V; |Vᵧ| ≤ V.
Zero vector: both components zero; no unique direction.
1. Resolution represents one vector
A component is the signed projection of a vector onto a chosen axis. In a plane, two perpendicular component vectors add to reproduce the original vector. The horizontal and vertical descriptions are equivalent to that diagonal vector.
For a force diagram, use the original force or its two equivalent components. Do not draw all three as separate forces and add them together: that would count the same force twice. Velocity components are likewise descriptions of one velocity, rather than two extra velocities added to it.
A displacement may be represented by equivalent perpendicular legs that reach the same endpoint. Such a two-leg route has a different path length and need not have the same motion as the original direct route.
2. Identify the given angle before choosing trig
The original vector is the hypotenuse of the component triangle. For an acute reference angle, the projection along the reference axis is adjacent and its magnitude uses cosine. The perpendicular projection is opposite and its magnitude uses sine.
With a standard angle θ measured counterclockwise from +x, Vₓ = V cos θ and Vᵧ = V sin θ. Here V is a non-negative magnitude. Enter the full standard angle and retain the signs returned by the functions. Use degree mode for angles given in degrees.
Do not memorize “horizontal always uses cosine” independently of the reference. If the given acute angle is measured from vertical, the vertical projection is adjacent and the horizontal one is opposite. Determine the component directions separately.
3. Standard angles and acute references agree
A vector α left of +y has standard angle θ = 90° + α. Its x component is negative and y component positive: Vₓ = −V sin α and Vᵧ = +V cos α. Using the full standard angle gives V cos(90° + α) and V sin(90° + α), with exactly the same values.
A vector α below −x has standard angle θ = 180° + α. Both components are negative: Vₓ = −V cos α and Vᵧ = −V sin α. If you use the full standard angle, do not apply those minus signs a second time.
The projection next to an acute reference uses cosine regardless of whether that axis is horizontal, vertical, along a slope or perpendicular to it. A labelled diagram prevents a reference-axis mix-up.
4. Signs come from directions
| Standard region | x sign | y sign |
|---|---|---|
| Quadrant I: 0°–90° | Positive | Positive |
| Quadrant II: 90°–180° | Negative | Positive |
| Quadrant III: 180°–270° | Negative | Negative |
| Quadrant IV: 270°–360° | Positive | Negative |
These quadrant statements apply strictly between the boundary angles. At an axis, one component is zero. For a nonzero vector: 0° gives (V, 0), 90° gives (0, V), 180° gives (−V, 0), and 270° gives (0, −V). 360° represents the same direction as 0°.
A zero vector has two zero components and no unique direction. Its unused angle does not create a new physical vector. In a numerical display, tiny trigonometric round-off at exact axes may be shown as zero.
5. Equal magnitudes are not always equal components
At 45°, 135°, 225° and 315°, |Vₓ| = |Vᵧ| = V/√2. At 45°, both signed components are positive and equal. At 225°, both are negative and equal. At 135° and 315°, their magnitudes match but their signs differ.
For a fixed nonzero V and first-quadrant θ increasing from 0° to 90°, Vₓ decreases from V to zero while Vᵧ increases from zero to V. This trend statement is limited to that interval; use full signs and trig across all quadrants.
6. Check the norm and the direction
Because the components are perpendicular, √(Vₓ² + Vᵧ²) = V. Each component magnitude is no larger than V. Keep compatible units, retain guard digits, and round the final reported values sensibly.
The arithmetic sum of component magnitudes generally does not reconstruct V. For two nonzero perpendicular components, that length sum is greater than the original vector magnitude.
A norm check alone does not prove that the signed components are correct. Squaring removes signs. Swapping x and y also leaves their squared sum unchanged. Always check the component labels, reference angle and actual direction as well.
7. Decode Fido’s pull
The 40 N tension on Fido’s collar points 35° above +x toward his handler. Its components are Tₓ = 40 cos 35° ≈ +32.77 N and Tᵧ = 40 sin 35° ≈ +22.94 N. Their perpendicular norm is 40 N.
The leash exerts one tension force on the collar, directed along the taut leash toward the handler. A force on the handler’s hand would point toward Fido instead. Always identify the object receiving the force before assigning component signs.
For a kite, tension on the kite points along the string toward its attachment point, often downward and toward the person holding it. Aerodynamic lift and weight are separate forces. Resolving tension does not create additional lift.
8. Read the Component Builder
The velocity grid has a fixed 25 m/s interval. Cyan shows the vector, green its x projection, and gold its y projection placed tip to tail with x. Their equivalent triangle has the same final tip as the original vector. Grey dashes mark the full target.
During playback, the construction fraction scales all three arrows together. At fraction f, the displayed components are fV cos θ and fV sin θ, and their norm is fV. This is a display construction, not a time history or actual acceleration.
The signed bar chart also uses a fixed m/s scale. Positive extends right of zero; negative extends left. Compare signs, axes and magnitudes. At zero construction fraction, the displayed vector is zero even if the chosen target is nonzero.
Changing a given resets construction fraction. A loaded preset earns no completion credit until its construction finishes. Three distinct vectors, including one with a negative component, unlock the next stage. The same vector entered through a preset and manually counts once.
Crest’s Exam Secrets
Read the reference axis
The side adjacent to the stated acute angle uses cosine. A vertical reference changes which projection is adjacent. A full standard angle supplies signed values directly.
Use signs once
Use either full standard-angle trig or positive acute-reference lengths with signs from the diagram. Applying a second minus sign after full-angle trig can reverse a component.
Keep component units
Force components are in N; velocity components in m/s; displacement components in m. A projection does not change the dimension of its original vector. Convert compatible prefixes before comparing answers.
Check direction as well as magnitude
Verify the norm, component bounds, quadrant and labels. A swapped or sign-reversed pair may pass the norm check while representing the wrong direction.
Choose useful axes
Axes may be rotated to suit a situation. The component values change with the axes, while the original physical vector and its magnitude stay the same.
Memory hooks
- One vector equals its perpendicular component sum.
- Adjacent to the given acute reference uses cosine.
- Standard-angle trig supplies signs once.
- Same units; signed projections; non-negative magnitude.
- Check the norm and the direction.
✨ Bonus wonder — a steep hill
Choose axes parallel and perpendicular to a slope at angle α above horizontal. Weight mg has downhill magnitude mg sin α and into-slope magnitude mg cos α. These are two projections of the same downward weight.
As α increases from 0° toward 90°, the downhill component grows. Switchbacks reduce the road’s slope angle and that downhill component, while making the route longer. Motion still depends on the other forces in the situation.
✓ Crest’s Checklist
- I identify the object, vector, axes and units.
- I locate the given angle and reference axis.
- I choose adjacent and opposite projections correctly.
- I retain the proper component signs.
- I reconstruct the original magnitude from the norm.
- I check labels and direction independently of that norm.
- I avoid counting components as extra physical forces.
- I handle axes and zero separately.
— Crest ✨ “Reference first. Project. Sign. Check.”
Mission 3.4 Complete! · All 10 levels cleared · PHYSICS CREST
Master of Vector Components
You resolved vectors, handled reference angles and signs, and checked the equivalent components.