WONDER — The Mystery
Energy in a Configuration
A raised wrecking ball can be momentarily stationary, and an ideal compressed spring can be held at rest. Their configurations still store energy. Which objects and interactions belong to each system, and what changes when a zero reference is moved?
Model: Gravitational potential energy belongs to the Earth–object system; use a uniform g = 9.8 N/kg near the surface. Elastic energy belongs to an ideal Hooke’s-law spring system within its elastic range. Potential energy is measured in J, not power in W, and can coexist with motion.
PREDICT — Commit to Your Answer
DOK 2 — PredictThree identical 2 kg bricks are at heights 1 m, 2 m and 4 m above the same level chosen as U = 0. Use uniform g = 9.8 N/kg. What is U for the 4 m brick?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
With the stated reference, U = 2 × 9.8 × 4 = 78.4 J. Changing the reference shifts U values but leaves energy differences unchanged.
▶ PLAY — Gravity Drop and Ideal-Spring Loading
DOK 2 — InvestigatePredict, measure and compare
In gravity mode, compare two initial heights at the same mass and reference. Then change only mass from one of that pair. Measure three matched setups. Move the zero level and explore spring extension or compression.
Mode 0: free fall from rest to y = 0 in a uniform field, with no drag; end is just before impact. Earth and body are selected. Mode 1: a quasistatic ideal-spring loading path, sampled over 3 s; kinetic energy is neglected and external work supplies elastic energy. Inactive controls are disabled. Gravity plots U versus y; spring plots applied force versus deformation. Only force–deformation area represents work.
Status: Ready
Playback: 1 simulation seconds per real second. Pause or Step for measurements.
Energy or Force Graph · Model Labelled
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Systems, Reference and Deformation
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Name the interacting system
Click to flip
Name the interacting system
Gravitational PE is associated with Earth and object together. Elastic PE is associated with spring deformation. A system can have potential energy while moving; PE does not require zero speed.
Rule 2
Use vertical change in uniform gravity
Click to flip
Use vertical change in uniform gravity
ΔUg = mgΔy. With zero chosen at yref, Ug = mg(y − yref). Ramp path length is not vertical height. Ug may be negative under a valid reference; changes do not depend on that reference.
Rule 3
Use the ideal-spring model
Click to flip
Use the ideal-spring model
For an ideal Hookean spring, Us = ½kx² relative to its undeformed state. x is signed stretch or compression; squaring makes either deformation store nonnegative energy under that zero.
Rule 4
Read the correct graph
Click to flip
Read the correct graph
The area under applied force versus deformation gives quasistatic work stored in the ideal spring. An energy-versus-height graph shows energy values and has slope mg; its area is not potential energy.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A body on the floor must have zero gravitational potential energy under every reference choice.”
Correct — the claim is false.
False. Its U value depends on the chosen zero. Selecting a zero above the floor gives a negative value there; differences between two positions remain unchanged.
Myth 2: “A spring compressed by x stores negative energy because x is negative.”
Correct — the claim is false.
False for the stated ideal-spring zero. Us = ½kx² is nonnegative for stretch or compression. The signed restoring force is −kx; force sign and stored-energy sign are different.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Reference and Graph Type
DOK 2 — ApplyPotential energy describes a configuration and a reference. Power describes a rate; the terms are not interchangeable.
Instructor Q1 — Move the Zero
The gravitational zero is moved upward. What happens to the energy change for the same lift in the same uniform field?
Instructor Q2 — Read a Spring Graph
For quasistatic loading of an ideal spring, which graph area gives the stored elastic energy increase?
Instructor Q3 — Gravitational Change
A 3 kg body rises vertically by 2 m in uniform g = 9.8 N/kg. Find ΔUg.
Instructor Q4 — Spring Compression
An ideal spring with k = 100 N/m is compressed by 0.20 m. Its undeformed state defines zero elastic energy. Find its stored energy.
4/4 — Instructor Questions Completed
Reference changes shift gravitational U values; energy changes stay the same. Energy–position values and force–position areas are different readings.
✎ PRACTICE — Independent Potential-Energy Cases
DOK 1–3 — PracticeChallenge 1: Raising a Container
A 4.2 kg container is raised from y = 0.80 m to y = 2.60 m in a uniform gravitational field of 9.8 N/kg. Calculate the change in gravitational potential energy of the Earth–container system.
Step-by-Step Solution
Vertical change = 2.60 − 0.80 = 1.80 m. ΔUg = 4.2 × 9.8 × 1.80 = +74.088 J.
Challenge 2: Compression to Extension
An ideal spring with k = 350 N/m changes from deformation −0.18 m to +0.12 m relative to its natural length. Find the signed change in elastic potential energy and total work by the spring on its attached body over that change.
Step-by-Step Solution
Initial elastic energy = ½ × 350 × 0.18² = 5.67 J; final = ½ × 350 × 0.12² = 2.52 J. Change = −3.15 J. Spring work is minus that change, +3.15 J.
Challenge 3: Audit the Ramp and Reference
An 8 kg load moves along a 7 m ramp from vertical coordinate y = 1.10 m to y = 3.50 m. Uniform g = 9.8 N/kg; U = 0 is chosen at y = 2.00 m. A student uses 7 m as the height change, says a negative initial U would be impossible, and says gravity does positive work during this rise. Calculate initial U, ΔU and work by gravity. Explain all three errors.
Step-by-Step Solution
Initial reference: Uinitial = 8 × 9.8 × (1.10 − 2.00) = −70.56 J; negative is valid.
Height change: Δy = 3.50 − 1.10 = 2.40 m, not the 7 m path length. ΔU = +188.16 J.
Gravity: its downward force does negative work during the upward change: Wg = −ΔU = −188.16 J.
☷ CHALLENGE — Compare Energy Changes and Stores
DOK 2 — ApplyCompare Energy Changes and Stores
Compare each case with its baseline. Gravitational cases use uniform g and the stated rise; spring cases use an ideal spring with zero at natural length. Classify the multiplicative effect on the specified quantity.
0 / 6 correct
Physics Insight
A squared deformation dependence is a property of the ideal spring model. A real bow needs its measured force–draw relationship if it is not Hookean.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: A younger learner calls a raised object’s potential energy “stored power” and says a compressed spring must have negative energy. Explain energy versus power, the interacting system, the chosen reference and why ideal spring deformation is squared.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 4.2 — Potential Energy
Choose a reference. Track the energy change.
1. Energy belongs to a configuration
Potential energy is a scalar energy in J associated with conservative interactions or reversible deformation. Gravitational PE belongs to Earth and object together. A moving system may have both potential and kinetic energy. Power is an energy-transfer rate in W; it is not stored energy.
2. Uniform gravitational field
ΔUg = mgΔy; Ug = mg(y − yref)
Use vertical coordinates and a specified zero yref. Only differences matter for transfers. Raising the zero reference can make U negative; this is valid. Moving the zero shifts both endpoint values equally without changing ΔU. Ramp path length is not vertical height change.
Gravitational force work is Wg = −ΔUg. A rise increases U and gives negative gravity work; a fall decreases U and gives positive gravity work.
3. Beyond the near-surface approximation
AP Physics 1 also includes Ug = −GMm/r for two approximately spherical mass distributions, taking zero at infinite separation. Here r is center-to-center separation. The negative value describes that reference, not an impossible energy.
For a small height change near a planet’s surface, the field is approximately uniform and ΔUg ≈ mgΔy. The drop lab and numerical gravity tasks use that uniform-field approximation.
4. Ideal elastic energy
Us = ½kx²; Fspring = −kx
k has units N/m; x is signed deformation from natural length in m. The spring’s force restores toward equilibrium. Extension and compression of the same magnitude store equal energy with this zero. For fixed k, doubling |x| gives four times Us.
Real bows, rubber bands and other materials may be nonlinear or show hysteresis. Use their force–deformation relationship; ½kx² requires the specified ideal Hooke’s-law model within its range.
5. Read graph values and areas correctly
An energy–height graph gives U at each height and has slope mg in a uniform field. Its area has units J·m and is not an energy. For quasistatic spring loading, the applied-force–deformation area gives work stored as ΔUs.
During compression from x = 0 to negative x, applied force and displacement both point toward compression. Their work is positive. Signed integration direction matters; a triangle drawn below the force axis is not automatically negative work when the path also goes toward negative x.
6. Operate the two lab modes
Gravity mode begins at rest and ends just before impact at y = 0. No air resistance is included. K + Ug stays constant even when the chosen reference makes Ug or the total tracked mechanical energy negative. A body starting at the floor remains there; there is no spurious fall.
Spring mode samples a prescribed quasistatic loading path over three seconds. Kinetic energy is neglected, and an external actuator supplies the increased elastic energy. It does not predict the oscillation or speed of a released mass. Inactive controls are disabled and excluded from distinct measurements.
Compare two heights at the same mass, then a mass change. Try a zero reference above the body, and compare equal-magnitude stretch and compression. Pause or step for measurements.
AS 5.2 covers uniform-field gravitational energy changes; AS 6.2 covers elastic energy from force–extension area. AP Physics 1 3.3 covers system potential energy, reference choices, ideal springs and gravitational forms.
✓ Crest’s Checklist
- I name the interacting system.
- I distinguish energy in J from power in W.
- I state the gravitational zero reference.
- I use vertical change rather than path length.
- I apply ½kx² only to the stated ideal spring.
- I distinguish energy–position values from force–position areas.
— Crest ☆ “Choose a reference. Track the energy change.”
Mission 4.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Potential Energy
Reference changes shift gravitational U values; energy changes stay the same. Energy–position values and force–position areas are different readings.