WONDER — The Mystery
Compare Mass and Speed
A 100 kg cart moves at 2 m/s while a 2 kg ball moves at 15 m/s in the same laboratory frame. Which has more translational kinetic energy? Does that comparison alone determine an impact force?
Model: Classical translational kinetic energy in a stated inertial reference frame. Treat each moving body as a particle and neglect rotation, drag and relativistic effects. K is a nonnegative scalar; it depends on speed in that frame. Braking examples specify an ideal constant opposing force.
PREDICT — Commit to Your Answer
DOK 2 — PredictA 500 kg cart speeds up from 8 m/s to 16 m/s in the same frame. Its initial kinetic energy is 16,000 J. What is its final kinetic energy?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
K = ½mv². At the same mass, the energy ratio is (16/8)² = 4, giving 64,000 J. This gives an energy comparison, not an automatic impact-force ratio.
▶ PLAY — Reaction and Constant-Force Braking
DOK 2 — InvestigatePredict, measure and compare
Measure two initial velocities at the same mass, braking force and reaction time. Then change only mass from one of that pair. Compare three matched setups, reverse direction, vary the braking force and separate reaction distance from braking distance.
One-dimensional motion in the road frame: constant signed velocity during the chosen reaction time, then a constant net force of magnitude F opposing motion until the exact first stop. Drag, rotation and further motion after stopping are excluded. This is a translating-particle model; road contact and wheel dynamics are not modeled. Reaction distance has zero net work; braking net work equals the change in K. The graph shows K values, not an energy represented by its area.
Status: Ready
Playback: 10 simulation seconds per real second. Pause or Step for measurements.
Kinetic Energy vs Travelled Distance
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Scalar Energy, Squared Speed and Net Work
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
State the reference frame
Click to flip
State the reference frame
K = ½mv² uses speed measured in a specified frame. An object can have zero K for an observer moving with it and nonzero K in the road frame. K is a scalar and never negative in the classical translational model.
Rule 2
Square speed; compare both inputs
Click to flip
Square speed; compare both inputs
For mass factor a and speed factor b, K changes by a b². Neither mass nor speed alone determines every comparison. Reversing velocity without changing its magnitude leaves K unchanged.
Rule 3
Use net work for energy change
Click to flip
Use net work for energy change
For a translating particle, Wnet = Kfinal − Kinitial. Negative net work lowers speed. Work can be negative although K itself cannot. Rotation or deformation needs an expanded model.
Rule 4
Separate braking and reaction
Click to flip
Separate braking and reaction
For the stated constant opposing net force, braking distance is Kinitial/F. Reaction distance is initial speed times reaction time. Total distance is their sum. Only the braking part scales with speed squared when mass and force stay fixed.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A 2400 kg truck at 5 m/s must have more kinetic energy than a 600 kg cart at 30 m/s in the same frame, because it is heavier.”
Correct — the claim is false.
False. The truck has 30,000 J and the cart 270,000 J. Compare both mass and squared speed. A heavier object can have less kinetic energy.
Myth 2: “A cart moving left has negative kinetic energy because its velocity is negative.”
Correct — the claim is false.
False. Leftward velocity may be negative on a chosen axis, but speed squared is nonnegative. The same mass at +v and −v has equal kinetic energy in that frame.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Reference Frames and Signed Work
DOK 2 — ApplyUse a stated observer and distinguish velocity, speed, kinetic energy and work. Doubling K alone does not specify collision force.
Instructor Q1 — A Moving Observer
An observer moves alongside a cart at exactly its velocity. What is the cart’s translational kinetic energy in that observer’s frame?
Instructor Q2 — Opposite Velocities
Two equal-mass carts have velocities +6 m/s and −6 m/s in the same frame. Compare their kinetic energies.
Instructor Q3 — Compute K
An 8 kg translating body has speed 5 m/s in the laboratory frame. Find its kinetic energy.
Instructor Q4 — Apply Net Work
A translating particle initially has K = 150 J. Net work of −90 J is done on it. Find its final kinetic energy.
4/4 — Instructor Questions Completed
Kinetic energy is frame dependent and nonnegative; work is signed. Constant-force braking and constant-time reaction have different speed dependences.
✎ PRACTICE — Independent Kinetic-Energy Cases
DOK 1–3 — PracticeChallenge 1: A Moving Trolley
A 720 kg trolley translates at 14.5 m/s in the laboratory frame. Neglect rotation. Calculate its kinetic energy in that frame.
Step-by-Step Solution
K = ½ × 720 × 14.5² = 75,690 J.
Challenge 2: Recover the Speed
A 75 kg translating body has kinetic energy 5400 J in the laboratory frame. Find its speed magnitude.
Step-by-Step Solution
v² = 2 × 5400/75 = 144 m²/s². Speed = 12 m/s. The energy does not identify the direction; a one-dimensional velocity could be +12 or −12 m/s.
Challenge 3: Audit a Braking Report
In the road frame a 750 kg translating cart initially has velocity −16 m/s. It keeps that velocity for a 0.75 s reaction interval, then experiences a constant opposing net force of 3000 N until first stopping. A student claims leftward motion gives negative K, halving speed halves K, and Kinitial/3000 alone is the total distance to stop. Find K when velocity reaches −8 m/s, net work during the change from −16 to −8 m/s, and total distance from the start of reaction to first stop. Explain all three errors.
Step-by-Step Solution
Scalar energy: Initial K = ½ × 750 × 16² = 96,000 J. At −8 m/s, K = 24,000 J, positive and one quarter of the initial value.
Signed work: Wnet = 24,000 − 96,000 = −72,000 J during the specified speed reduction.
Distance: reaction distance = 16 × 0.75 = 12 m; braking distance = 96,000/3000 = 32 m. Total = 44 m. The student omitted the reaction stage.
☷ CHALLENGE — Compare Kinetic-Energy Changes
DOK 2 — ApplyCompare Kinetic-Energy Changes
Every card compares with the same nonzero baseline kinetic energy, in the same frame. Keep every unmentioned quantity fixed.
0 / 6 correct
Physics Insight
For simultaneous changes, multiply the mass factor by the square of the speed factor. “Speed dominates” is not a universal comparison without those factors.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain to a younger learner why doubling speed at fixed mass quadruples kinetic energy, why velocity direction does not make K negative, and why total reaction-plus-braking distance need not quadruple. Explain what extra information would be needed to compare impact forces.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 4.3 — Kinetic Energy
State the frame. Square the speed.
1. Translational kinetic energy
K = ½mv²
m is mass in kg and v is speed in m/s measured in a stated reference frame. K is a nonnegative scalar in J, where 1 J = 1 kg·m²/s². A one-dimensional signed velocity is squared; leftward motion does not give negative K. At rest in the chosen frame, translational K is zero.
2. State the frame and model
A co-moving observer measures zero relative speed and zero translational K for the body; a road-frame observer can measure nonzero K for the same body. Compare energies in the same frame.
The classical formula assumes speeds well below the speed of light. These tasks use a translating-particle model. A spinning or deforming body can have additional energy; translational K alone need not be its entire mechanical energy.
3. Derive the formula from work
For constant net force on a particle moving along a straight line, Wnet = Fnet d = mad. With v² − u² = 2ad, Wnet = ½m(v² − u²). Starting from rest gives K = ½mv². More generally, net work equals the change in kinetic energy.
4. Compare factors
Knew/Kold = (mnew/mold)(vnew/vold)²
For nonzero initial speed: double mass gives twice K; double speed at fixed mass gives four times K; triple speed gives nine times K; half speed gives one quarter K. If both mass and speed change, account for both. A small mass can have more K than a large mass when its speed is sufficiently greater.
5. Rearrange for speed
v = √(2K/m)
This gives speed magnitude. Energy does not determine direction. Use SI units before calculating and keep units through a rearrangement.
6. Work can be negative; K cannot
Wnet = Kfinal − Kinitial
Negative net work lowers K. In the ideal braking model, the opposing force ceases at the exact first stop; continuing the same formula beyond that stop would wrongly produce reverse motion or negative energy. An initial zero-speed setup remains stationary.
7. Reaction and braking distance
For a constant opposing net force F of positive magnitude, in the road-frame particle model:
dbrake = Kinitial/F = mvinitial²/(2F)
dreaction = |vinitial| treaction; dtotal = dreaction + dbrake
At fixed mass and F, doubling initial speed quadruples braking distance. At fixed reaction time it doubles reaction distance. The sum generally does not quadruple. Changing braking force, road conditions or reaction time changes the prediction.
During reaction, net force and net work are zero in this idealization. During braking, net force opposes velocity and net work is negative. The K–distance graph is flat during reaction, then decreases linearly to zero. Its vertical values are energy; its area has units J·m and is not an energy. In the braking section its slope is −F.
8. Energy is not automatically impact force
An energy comparison alone does not determine collision force. For the same stopping distance, the magnitude of the displacement-averaged opposing net force is Kinitial/d. For a specified stopping time, momentum change determines the time-averaged net force. Different stopping distances, times and force histories can give different forces. Peak force requires still more detail.
9. Operate the lab
Run two velocity setups, then change only mass. Reverse the velocity sign to see the same energy at equal speed; compare force changes and the zero-speed case. Motion stops exactly at first rest. The road sketch is rescaled to each setup, so use labelled measurements for distance comparisons. The graph traces only the distance already travelled.
AS 5.2.3–4 covers derivation and use of translational K. AP Physics 1 3.1.A includes its scalar and frame-dependent nature; 3.2.A connects net work with changes in K.
✓ Crest’s Checklist
- I state the reference frame and translation model.
- I use speed squared and a nonnegative K.
- I compare both mass and speed factors.
- I use net work for changes in K.
- I separate reaction distance from braking distance.
- I do not infer collision force from energy alone.
— Crest ☆ “State the frame. Square the speed.”
Mission 4.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Kinetic Energy
Kinetic energy is frame dependent and nonnegative; work is signed. Constant-force braking and constant-time reaction have different speed dependences.