WONDER — The Mystery
One Interaction, Different Accelerations
Two isolated objects attract each other gravitationally. One has much greater mass than the other. Are the forces unequal, or are the resulting accelerations unequal? How does changing their separation affect the interaction?
Model: Newtonian gravity for point masses, or exterior points of a spherically symmetric source. r is center separation, not a surface gap. Use G = 6.67×10⁻¹¹ N·m²/kg² as the rounded constant throughout this mission. g is a source-dependent field, not that universal constant.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo fixed point masses attract with force magnitude 20 N at center separation r. Find the force magnitude at separation 2r.
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Doubling separation multiplies its square by four, so the new force is 20/4 = 5 N.
▶ PLAY — Live Mutual Gravitational Approach
DOK 2 — InvestigatePredict, measure and compare
Measure two initial center separations at the same masses. Then change only mass 1 from one of that pair. Compare three matched setups. Watch both objects move, keep their center of mass fixed and compare their acceleration magnitudes.
Two isolated Newtonian point masses start at rest and attract each other along a line. Mass controls are in units of 10¹² kg and initial separation in km. The exact radial-fall model ends when separation reaches half its initial value, before any point collision. Both masses move. Playback shows each run over 8 real seconds while the readout gives elapsed physical seconds. Body drawings are schematic; force arrows have equal lengths and grow in proportion to F/Finitial within each run.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Force Magnitude vs Center Separation
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Inverse Square, Equal Pairs and Variable Field
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Use the correct distance and shape
Click to flip
Use the correct distance and shape
F = Gm1m2/r² uses center separation for point masses. Outside a spherically symmetric source, its field is that of its mass at the center. An arbitrary extended mass distribution may need a more detailed calculation.
Rule 2
Equal forces do not mean equal accelerations
Click to flip
Equal forces do not mean equal accelerations
The gravitational interaction forces have equal magnitude and opposite directions on different bodies. Each body accelerates according to F/m, so the smaller mass has the larger acceleration.
Rule 3
Separate G from g
Click to flip
Separate G from g
G is the gravitational constant. The field of a spherical source is g = GM/r² in N/kg, numerically equal to free-fall acceleration in m/s² when gravity alone acts. It varies with source mass and position.
Rule 4
Compare all factors
Click to flip
Compare all factors
Double either mass at fixed separation: twice F. Double separation at fixed masses: F/4. Surface gravitational field depends on both source mass and radius. Moving above a surface requires center distance R + h.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “The larger body pulls harder on the smaller one than the smaller body pulls on it.”
Correct — the claim is false.
False. Newton’s third law gives equal and opposite interaction forces on different bodies. Their accelerations can differ because their masses differ.
Myth 2: “Since G is universal, g must have the same value everywhere.”
Correct — the claim is false.
False. g depends on the source mass and distance. G is a constant with different units; g is a gravitational field magnitude.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Source Field and Approximation
DOK 2 — ApplyMass, force and gravitational field are distinct quantities. A constant near-surface g is a local approximation.
Instructor Q1 — Meaning of g
What does g = Fgravity/mtest represent for a small test body?
Instructor Q2 — Exterior Sphere
When can a spherical source’s external field be treated as if its mass were at its center?
Instructor Q3 — Triple Separation
Fixed point masses initially attract with force 72 N. Find the force if center separation triples.
Instructor Q4 — Use a Field
A 4 kg test body is in a gravitational field of magnitude 6 N/kg. Find its gravitational force magnitude.
4/4 — Instructor Questions Completed
The interaction pair has equal force magnitudes; each source creates a different field at the other body when their masses differ.
✎ PRACTICE — Independent Gravity Cases
DOK 1–3 — PracticeChallenge 1: Two Small Point Masses
Two ideal point masses of 55 kg and 90 kg have center separation 2.20 m. Use G = 6.67×10⁻¹¹ N·m²/kg². Find their gravitational force magnitude.
Step-by-Step Solution
F = (6.67×10⁻¹¹) × 55 × 90/2.20² ≈ 6.821591e-08 N. The small magnitude still requires a nonzero numerical answer.
Challenge 2: Above a Model Planet
A spherical model planet has mass 7.20×10²⁴ kg and radius 7.00×10⁶ m. An 80 kg test body is 1.50×10⁶ m above its surface. Use G = 6.67×10⁻¹¹ N·m²/kg². Find the gravitational field and force magnitudes at the body.
Step-by-Step Solution
Center distance = 7.00×10⁶ + 1.50×10⁶ = 8.50×10⁶ m. Field g ≈ 6.646920 N/kg; test-body force = 80g ≈ 531.753633 N.
Challenge 3: Audit an Interaction Pair
Two isolated point masses, body 1 of 8 kg and body 2 of 24 kg, move from center separation 1.60 m to 3.20 m. Use G = 6.67×10⁻¹¹ N·m²/kg². At the new separation a student says the larger body exerts three times the force of the smaller, doubling separation halves the force, and both accelerations must match because G is the same. Find the magnitude of each force and each body’s acceleration at the new separation. Explain all three errors.
Step-by-Step Solution
Force pair: F = G × 8 × 24/3.20² = 1.250625e-09 N on each, in opposite directions. Third-law magnitudes are equal.
Distance: Relative to 1.60 m, doubling separation quarters force rather than halving it.
Response: a1 = F/8 = 1.563281e-10 m/s²; a2 = F/24 = 5.210937e-11 m/s². Body 1 accelerates three times as much. Constant G does not imply equal field or acceleration.
☷ CHALLENGE — Compare the Force Factors
DOK 2 — ApplyCompare the Force Factors
Compare each case with the same point-mass baseline. Keep every unmentioned quantity fixed; use center separation.
0 / 6 correct
Physics Insight
Masses multiply, separation is squared in the denominator, and exchanging the recipients does not change the pair’s force magnitude.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why two unequal masses pull on each other with equal forces but move differently. Distinguish G from the gravitational field g, and explain why being in space does not automatically mean no gravity.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 5.4 — Universal Gravitation
Use center separation. Distinguish force from field.
1. Newtonian force magnitude
F = Gm1m2/r²
Use mass in kg, center separation r in m and force in N. This mission specifies the rounded G = 6.67×10⁻¹¹ N·m²/kg². It is appropriate for point masses and for exterior fields of spherical symmetric sources. An arbitrary extended distribution cannot always be represented by a single center point.
2. Equal and opposite interaction pair
Each mass exerts the same force magnitude on the other, in opposite directions. The pair acts on different bodies and therefore is not a cancellation on either body’s own force diagram. Each acceleration is F divided by that body’s own mass.
3. Gravitational field and weight
g = Fgravity/mtest = GM/r²; Fgravity = mtest g
g is field strength in N/kg. Under gravity alone, its numerical value equals free-fall acceleration in m/s². It depends on the source and position. G is a universal constant with different units, not a synonym for g.
Near a planet’s surface, g can be approximately constant over a sufficiently small height interval. This is an approximation, not a field that is exactly uniform at all distances. Use the g stated in a task; AP near-surface work often uses 10 N/kg, while this mission’s model calculations use their supplied data.
4. Surface radius and altitude
Above a spherical planet, center distance is R + h. The field ratio to the surface is [R/(R + h)]². Doubling altitude does not generally quarter the field, because altitude is not center separation.
Comparing model planets requires both mass and radius: g2/g1 = (M2/M1)(R1/R2)². A larger source mass does not alone determine its surface field.
5. The apple–Moon comparison is approximate
At an ideal separation 60 times a planet’s radius, its field is 1/3600 of the surface field. With surface value 9.8 N/kg this gives about 0.00272 N/kg. Real Moon motion and Earth shape require approximations; this is not an exact measurement proof.
This compares the source field or test-body acceleration, not gravitational forces on an apple and Moon of different masses. Do not replace a field ratio with a force ratio unless the test mass is unchanged.
6. Exterior size and symmetry
Outside a spherical symmetric source, keeping its mass and the test point’s center distance unchanged keeps the Newtonian field unchanged, even if the source contracts. Interior fields or a nonspherical rearrangement require a different analysis.
7. Space and apparent weight
Gravity continues beyond a planet’s surface. In the ideal orbital free-fall model, spacecraft and occupants fall together and a support scale can read zero despite a nonzero gravitational force. Apparent weight and gravitational force are different quantities, explored in Mission 5.6.
8. Operate the live two-body lab
Both isolated point masses begin at rest. The exact mutual approach keeps their center of mass fixed and total linear momentum zero. Each inward force magnitude is equal; the less massive body gains more speed and acceleration. The run ends at half the initial center separation, before the point-mass collision singularity.
Mutual U = −Gm1m2/r uses zero at infinite separation. As separation decreases, U becomes more negative and combined K increases by the same amount. Total K + U is constant in this isolated model.
Run, pause, step or reset. Each run is shown over eight real seconds; physical elapsed time is read separately. Arrow length is proportional to F/Finitial within a run, with equal lengths for the two forces; use the force readout to compare different runs. Scientific notation preserves small field values.
The force–separation graph traces visited separations with positive force magnitude; it is not automatically a signed individual-body work graph. A Level 13.2–13.3 and AP Physics 1 2.6.A–B supply the force, field and approximation scope.
✓ Crest’s Checklist
- I use center separation and check the source shape.
- I distinguish each body’s force from acceleration.
- I keep equal third-law forces on different diagrams.
- I distinguish G from g.
- I add radius to altitude.
- I qualify near-surface and astronomical approximations.
— Crest ☆ “Use center separation. Distinguish force from field.”
Mission 5.4 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Universal Gravitation
The interaction pair has equal force magnitudes; each source creates a different field at the other body when their masses differ.