WONDER — The Mystery
Does Braking Keep a Wheel Stopped?
A fixed-axis rotor starts with positive angular velocity and experiences a constant negative angular acceleration. It slows to zero. If that same acceleration continues, does the rotor stay at rest or reverse? A graph and a moving marker can expose a mistake that a final speed alone may hide.
Model: Rigid fixed-axis motion with constant angular acceleration over each stated interval. CCW is positive. Angular displacement is signed and unwrapped. Signed arc displacement of a point differs from its circular path distance if rotation reverses. A fixed axle does not translate merely because its rim rotates.
PREDICT — Commit to Your Answer
DOK 2 — PredictA rotor initially turns clockwise at −4.8 rad/s. It reaches rest after 3.0 s under constant angular acceleration. CCW is positive. What is the angular acceleration?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
α = [0 − (−4.8)]/3.0 = +1.6 rad/s². It opposes the initial clockwise velocity during the slowdown.
▶ PLAY — Live Rotor: Stop, Reverse and Measure
DOK 2 — InvestigatePredict, measure and compare
Measure two initial angular velocities at the same acceleration, run duration and radius. Then change only acceleration from one of that pair. Complete three matched runs. Compare final velocity, signed displacement and total angle traveled, especially when a run crosses zero velocity.
A fixed axle and rigid rotor. Constant α is imposed for the selected physical duration, displayed over 8 real seconds. CCW is positive. A persistent rim marker follows the integrated angle. The rotor is drawn at 48 pixels per meter. Signed arc displacement is rΔθ; path distance accumulates absolute motion, including both directions after reversal. Shaded graph areas above and below zero contribute opposite signs.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Angular Velocity: Signed Area Develops Live
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — The Four Equations and Their Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Final angular velocity
Click to flip
Final angular velocity
ωf = ω0 + αt. Requires constant α over the interval. Its sign describes direction; speed is |ωf|. Slowing occurs when nonzero ω and α have opposite signs, which may change after reversal.
Rule 2
Angular displacement
Click to flip
Angular displacement
Δθ = ω0t + ½αt². Requires constant α. The time is squared in the second term. Δθ is signed displacement, not total angle traveled when direction reverses.
Rule 3
Eliminate time
Click to flip
Eliminate time
ωf² = ω0² + 2αΔθ. Requires constant α. Squaring loses the sign of ωf: recover the physically correct direction from the time evolution or other evidence. It does not justify always taking the positive root.
Rule 4
Use the average for constant α
Click to flip
Use the average for constant α
Δθ = ½(ω0 + ωf)t. The endpoint average equals the interval average because ω(t) is linear for constant α. For varying α, the endpoint average is not generally the true average.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Negative angular acceleration always means a rotating body is slowing down.”
Correct — the claim is false.
False. Negative α slows positive rotation but increases the speed of negative rotation. After crossing zero, the same α can speed up the reverse motion.
Myth 2: “The total rim path distance is always r times the magnitude of the net angular displacement.”
Correct — the claim is false.
False. Reversal requires adding the path lengths traveled in both directions. Net angular displacement subtracts opposite-direction contributions.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Choose an Equation and Interpret It
DOK 2 — ApplyEach quantitative question specifies constant angular acceleration.
Instructor Q1 — Which Assumption?
When may the initial and final angular velocities be averaged to obtain the interval average angular velocity?
Instructor Q2 — The Square-Root Trap
A time-free equation gives ωf² = 9 (rad/s)². What can be concluded about ωf from that equation alone?
Instructor Q3 — From Rest
A rotor starts from rest with constant angular acceleration +1.5 rad/s² for 4.0 s. Find its angular displacement.
Instructor Q4 — A Slowdown Interval
A rotor decreases from +7.0 to +1.0 rad/s in 3.0 s with constant angular acceleration. Find the angular displacement.
4/4 — Instructor Questions Completed
Equations predict signed motion. A stopping instant does not impose a permanent stop unless the model changes there.
✎ PRACTICE — Independent Constant-Acceleration Cases
DOK 1–3 — PracticeChallenge 1: Clockwise Braking
A rotor initially has angular velocity −6.0 rad/s and reaches zero angular velocity in 3.0 s under constant angular acceleration. CCW is positive. Find the signed angular acceleration.
Step-by-Step Solution
α = [0 − (−6.0)]/3.0 = +2.0 rad/s². The positive acceleration opposes the initial negative rotation during this interval.
Challenge 2: A Fixed-Axle Wheel Speeds Up
A rigid fixed-axis wheel has a marked point at radius 0.25 m. Its initial angular velocity is +0.50 rad/s and its constant angular acceleration is +1.2 rad/s² for 4.0 s. CCW is positive. Find the final angular velocity, angular displacement and final linear speed of the mark.
Step-by-Step Solution
ωf = 0.50 + 1.2(4.0) = 5.3 rad/s. Δθ = 0.50(4.0) + ½(1.2)(4.0)² = 11.6 rad. Final mark speed = 0.25(5.3) = 1.325 m/s. The fixed axle remains at rest.
Challenge 3: Audit a Reversal Report
A fixed-axis rotor begins at +4.0 rad/s and has constant angular acceleration −2.0 rad/s² for a full 5.0 s. A rim mark is at radius 0.30 m. CCW is positive. A report says the rotor stops after 2 s and stays stopped; uses ωf² to choose +6 rad/s; and says the rim path distance is r|Δθ|. Find the final signed angular velocity, net angular displacement, total angle traveled and rim path distance. Explain all three report errors and identify what change to the acceleration would be needed to keep it stopped after 2 s.
Step-by-Step Solution
ωf = 4.0 − 2.0(5.0) = −6.0 rad/s. Δθ = 4.0(5.0) − ½(2.0)(5.0)² = −5.0 rad.
It reaches zero at 2.0 s. Its positive displacement to that instant is 4.0 rad. In the remaining 3.0 s it rotates through −9.0 rad, so total angle traveled = 4.0 + 9.0 = 13.0 rad. Rim path distance = 0.30(13.0) = 3.90 m; signed arc displacement is −1.50 m.
The imposed constant negative α continues through rest and produces clockwise reversal. Remaining stopped would require α to change to zero at 2 s. The squared equation loses direction and cannot justify +6 rad/s. Taking |net displacement| loses the outward-and-back motion, so it underestimates path distance.
☷ CHALLENGE — Sort Equations, Signs and Path Interpretations
DOK 2 — ApplySort Equations, Signs and Path Interpretations
Classify statements by their role in constant-angular-acceleration problems.
0 / 6 correct
Physics Insight
Model changes, signs and requested quantities matter as much as equation choice.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why a rotor with positive initial angular velocity and constant negative angular acceleration can stop and then reverse. Distinguish final angular velocity, net angular displacement and total angle traveled, and state when the four equations are valid.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 6.2 — Constant Angular Acceleration Equations
State the assumption. Preserve the signs. Check for reversal.
1. The four constant-α equations
ωf = ω0 + αt
Δθ = ω0t + ½αt²
ωf² = ω0² + 2αΔθ
Δθ = ½(ω0 + ωf)t
All four require constant angular acceleration over the interval used. They have the same mathematical form as one-dimensional constant-acceleration kinematics because angular velocity and acceleration are the corresponding rates of signed angular position. The linear counterpart is signed displacement, not automatically total distance.
2. Choose by variables and assumptions
Draw the axis and direction, list givens and requested quantities, state the constant-α assumption, then choose an equation that includes the needed variables. If time is absent, the squared equation may help. If α is absent but endpoint velocities and time are known under constant α, use their average.
The half-sum of endpoint velocities is not generally the time average when α varies. A nonlinear angular-velocity graph requires its actual signed area, or appropriate piecewise information. Do not apply one constant-acceleration equation across a change of α.
3. Signs and slowing
CCW is positive in this mission. Clockwise angular velocity is negative. Angular speed is |ω| and cannot be negative. If nonzero ω and α have opposite signs, speed decreases at that instant; if they have the same sign, speed increases. A negative α is not inherently “braking.”
At a stopping instant ω = 0. If a nonzero α continues, the angular velocity crosses zero and the rotor reverses. A real brake may instead change its torque or cease motion at rest, but that is a different physical model from constant α maintained through the whole interval.
4. Squaring loses direction
The equation involving ωf² cannot by itself distinguish +ωf from −ωf. Use the signed time equation or other direction information to choose a root. If a rotor crosses zero, automatically taking the positive root gives the wrong final direction.
The time equation retains direction directly. Check whether a computed time is nonnegative and whether it describes the requested event; multiple time roots can refer to different visits to an angular position.
5. Displacement, total travel and graph area
The signed area under ω(t) is net angular displacement. Areas below zero contribute negatively. Total angle traveled is the area under |ω(t)|, so both directions contribute positively.
For constant α ≠ 0, a possible zero-velocity instant is tstop = −ω0/α. Split the motion only if that time lies inside the interval. Compute each portion’s angular displacement, then add the absolute values for total travel. If no reversal occurs, total angle traveled is |Δθ|.
For example, a rotor starting at +3 rad/s with α = −1 rad/s² over 5 s stops at 3 s. The first portion contributes +4.5 rad and the second −2 rad. Net angle is +2.5 rad, while total travel is 6.5 rad. A graph makes the subtraction versus addition visible.
6. Connect a fixed-radius point
Signed arc displacement = rΔθ; path distance = r × total angle traveled
Point speed = r|ω|; signed tangential acceleration = rα
Use radians and the distance of the chosen point from the axis. These fixed-radius links apply instantaneously even when α varies, but the integrated four equations still require constant α. Tangential acceleration is not total acceleration in circular motion; inward acceleration is rω².
A fixed axle stays fixed while rim points rotate. A car’s center displacement equals R times angular displacement only under an appropriate rolling-without-slip constraint and consistent signed convention on stationary ground. That extra constraint is not valid for a fixed axle or a slipping tire. Mission 6.3 develops these distinctions.
7. Live rotor controls
Set initial angular velocity, constant α, physical duration and marked radius. Every run is played over 8 real seconds. The persistent marker moves with the integrated angular position, while the signed-velocity graph develops and shades positive and negative displacement contributions.
Run, pause, step and reset are synchronized with the same physical clock. A zero-velocity instant is included only when it lies within the run; an at-rest run is labelled separately. Loading a preset alone does not complete a measured experiment. Three matched completed setups are needed: change initial velocity alone, then α alone.
8. Course boundary
AP Physics 1 topic 5.1.A.4 prescribes constant-angular-acceleration relationships and their graphs. For Cambridge A Level 9702, the full treatment here is extension beyond the angular-speed and radian content in 12.1. The mission does not attribute the four equations to a Cambridge requirement that is absent.
✓ Crest’s Checklist
- I state constant α before using the four equations.
- I square time in the displacement term.
- I choose slowing from the signs of both ω and α.
- I follow continued acceleration beyond a stopping instant.
- I recover direction after using a squared equation.
- I distinguish net angular displacement from total angle traveled.
- I apply any rolling link only with its no-slip condition.
— Crest ☆ “State the assumption. Preserve the signs. Check for reversal.”
Mission 6.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Rotational Equations
Equations predict signed motion. A stopping instant does not impose a permanent stop unless the model changes there.