Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 6.3 · Acceleration Components and Rolling Two linear components. One angular description. State the frame.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Point That Stops for an Instant

A rigid wheel rolls without slipping on a stationary horizontal surface. A marked material point begins at the bottom. The wheel’s center moves while the marker rotates around it. How can that marker be momentarily at rest relative to the ground yet have a changing velocity?

Ideal rolling modelRigid circular wheelStationary groundNo slippingMarked material point
Given conditions only; arrows and distances are schematic.

Model: Use an inertial ground frame. A fixed-axis point has one linear acceleration with perpendicular tangential and inward components. Angular acceleration describes rotation in rad/s²; it is not a third linear component in m/s². Rolling combines translation and rotation. Quantitative slipping dynamics and real rolling resistance are excluded.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A rigid wheel rolls without slipping to the right on stationary ground with center speed 18 m/s and radius 0.30 m. What is the instantaneous speed of the material point at the top, relative to the ground?

Prediction givensCenter speed: 18 m/sRadius: 0.30 mNo slip; rightward motionGround frame
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Wheel: Fixed Axle or Rolling

DOK 2 — Investigate

Predict, measure and compare

Measure two radii at the same initial angular velocity, angular acceleration and mode. Then change only angular acceleration from one of that pair. Compare three matched runs. Watch the wheel translate and rotate in rolling mode; compare the fixed-axle mode and the slowing/reversal preset.

Rigid wheel, radius R; clockwise angular quantities and rightward center motion are positive. The lab imposes constant angular acceleration for 2 physical seconds. Mode 1 enforces ideal rolling without slipping on stationary ground, assuming the needed interactions are available; mode 0 fixes the axle. Playback is 8 real seconds per run. Positions are rescaled within each run, with a fixed ground view. Purple is one persistent material point, initially at the bottom. Cyan and yellow vectors show its ground-frame velocity and acceleration; their directions are exact but lengths are schematic.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Signed Angular Velocity vs Physical Time

Use the labelled readouts.

Measurements

Elapsed physical time:
Clockwise-positive angular velocity:
Clockwise-positive angular displacement:
Rightward-positive center displacement:
Rightward-positive center velocity:
Rightward-positive center acceleration:
Rim tangential acceleration magnitude relative to center:
Rim inward acceleration magnitude relative to center:
Marked point ground velocity (vx, vy):
Marked point ground acceleration (ax, ay):
Instantaneous top point ground speed:
Instantaneous bottom point ground speed:
Instantaneous bottom point ground acceleration magnitude:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Components, Frames and Contact

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Do not add incompatible quantities

Click to flip

Do not add incompatible quantities

Angular acceleration α is in rad/s². A point’s tangential and inward linear components are in m/s². For a fixed axle, their perpendicular vector sum is the point’s total linear acceleration; α is not a third linear vector to add.

Rule 2

Use instantaneous relationships

Click to flip

Use instantaneous relationships

For a point at fixed radius from the axis, a_t = rα and a_c = rω² = vrelative²/r. These instantaneous relationships do not require α to stay constant. Only the lab’s integrated time equations assume constant α.

Rule 3

Combine translation and rotation

Click to flip

Combine translation and rotation

For rolling without slip on stationary ground, vCM = Rω and aCM = Rα with consistent signs. Add center velocity to rotational velocity for each point. Top ground speed is 2|vCM| and bottom ground speed is zero at that instant.

∫

Rule 4

Zero velocity is not zero acceleration

Click to flip

Zero velocity is not zero acceleration

The material point at contact is momentarily at rest, but its ground acceleration is upward with magnitude Rω² when ω ≠ 0 in this ideal rigid-wheel model. Static friction, if present, does not dissipate energy in ideal no-slip contact; its magnitude can be zero.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Angular acceleration, tangential acceleration and centripetal acceleration are three independent linear vectors that can be added directly.”

Myth 2: “Every wheel rolling without slipping must experience nonzero friction, and its zero-speed contact point must have zero acceleration.”

6

✦ THE SECOND “AHA!” — Same Rotation, Different Linear Motion

DOK 2 — Apply

Use the specified frame. The translation of a rolling center changes the ground motion of its rim points.

Progress
0/4
Ideal rolling modelRigid circular wheelStationary groundNo slippingMarked material point
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Two Radii on One Rigid Disk

Two points lie at r and 2r on the same rigid disk with nonzero ω and α about a fixed axle. Compare the outer point’s tangential and inward acceleration magnitudes with the inner point’s.

2

Instructor Q2 — Does Pure Rolling Require Friction?

An ideal wheel rolls freely at constant center speed on a horizontal surface, with no drive torque, drag or resistance. Must its horizontal static friction be nonzero?

3

Instructor Q3 — Find Angular Acceleration

A point 0.90 m from a fixed axle has tangential acceleration magnitude 2.70 m/s². Find the angular acceleration magnitude.

Fixed-axle givensRadius: 0.90 mTangential a: 2.70 m/s²
Given conditions only; arrows and distances are schematic.
rad/s²
4

Instructor Q4 — Find Center Speed

A wheel of radius 0.35 m rolls without slipping on stationary ground with angular speed 4.0 rad/s. Find its center speed.

Rolling givensRadius: 0.35 mAngular speed: 4.0 rad/sNo slip; stationary ground
Given conditions only; arrows and distances are schematic.
m/s
7

✎ PRACTICE — Independent Components and Rolling Cases

DOK 1–3 — Practice
DOK 2 — Application

Challenge 1: A Speeding Fixed-Axle Disk

A point is 0.80 m from a fixed axle. At the instant considered, the rigid disk has angular speed 5.5 rad/s and angular acceleration magnitude 2.5 rad/s² in the direction of rotation. Find the point’s tangential acceleration magnitude, inward acceleration magnitude and total linear acceleration magnitude.

Disk givensPoint radius: 0.80 mAngular speed: 5.5 rad/sAngular a: 2.5 rad/s²Fixed axle; speeding up
Given conditions only; arrows and distances are schematic.
m/s²
m/s²
m/s²
DOK 2 — Application

Challenge 2: A Wheel That Speeds Up

A rigid wheel has diameter 0.64 m and rolls without slipping to the right on stationary ground. Its initial center speed is 4.8 m/s. Its center acceleration is constant at 1.2 m/s² rightward for 3.0 s. Find the center displacement, final angular speed and final ground-frame speeds of the material points then at the top and bottom.

Three-second givensDiameter: 0.64 mInitial center v: 4.8 m/sCenter a: 1.2 m/s²Interval: 3.0 sNo slip; rightward motion
Given conditions only; arrows and distances are schematic.
m
rad/s
m/s
m/s
DOK 3 — Audit & Justify

Challenge 3: Audit a Rolling-Wheel Report

At one instant a rigid wheel of radius 0.40 m rolls without slipping to the right on stationary ground. Center speed is 3.2 m/s and center acceleration is 1.6 m/s² rightward. A report says angular acceleration is 1.6 rad/s² because it equals center acceleration, adds α directly to the two linear acceleration components, and says the material point at the bottom must have zero acceleration because it is momentarily at rest. Find angular acceleration magnitude, rim inward acceleration magnitude relative to the center, the top point’s total ground acceleration magnitude and the bottom point’s ground speed. Explain all three report errors and describe the bottom point’s actual ground acceleration.

Report givensRadius: 0.40 mCenter speed: 3.2 m/sCenter a: 1.6 m/s²No slip; stationary groundInstantaneous top / bottom
Given conditions only; arrows and distances are schematic.
rad/s²
m/s²
m/s²
m/s
8

☷ CHALLENGE — Separate Quantities and Constraints

DOK 2 — Apply

Separate Quantities and Constraints

Sort each statement by what it describes: an angular quantity, a point’s linear component about a fixed axle, or an ideal no-slip center-motion constraint.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why angular acceleration is not an additional linear acceleration to add to tangential and inward components. Then explain how a wheel’s center can move while its instantaneous contact point has zero ground velocity, and why that material point can still accelerate.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.