Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 6.6 · Rotational and Static Equilibrium Balance forces and moments. Check the supports.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Why Might an Attachment Pull Down?

A rigid board is attached at its left end and supported farther to the right. A load sits on the overhanging end. A downward load to the right of the support tends to tip that end down. Can a downward force at the left attachment supply the opposing moment, while the right support pushes upward?

Overhanging boardRigid horizontal boardLeft attachment AInterior support BLoad to the right of B
Given conditions only; arrows and distances are schematic.

Model: Planar rigid-board statics in uniform gravity. A specified hold-down attachment can exert either upward or downward force; a simple contact support can push but cannot pull. All moment arms are measured from one chosen reference point. Rotational equilibrium alone permits constant angular velocity; static equilibrium additionally describes an object at rest with zero resultant force and moment.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A horizontal board has a hold-down attachment A at its left end and an upward support B to its right. Its own weight is negligible, and a downward load acts to the right of B. In static equilibrium, which direction must A’s force on the board have?

Prediction givensNegligible board weightA left of BLoad right of BStatic equilibrium
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Moving Load: Balanced Board Reactions

DOK 2 — Investigate

Predict, measure and compare

Complete two runs varying only moving-load weight, then a third varying only board weight from one of that pair. Watch a carriage travel across the board while the reactions update. Track the sign of A’s force and confirm both force and moment balance at every load position.

A uniform rigid board stays horizontal and at rest. Attachment A at x = 0 can push or pull vertically; support B at x = d pushes upward. An ideal carriage of constant weight moves at constant speed along a frictionless horizontal rail, from x = 0.1L to 0.9L in 4 physical seconds, displayed over 8 real seconds. Its horizontal speed is 0.2L m/s, and its vertical acceleration is zero, so its load on the board equals its weight. Start and stop transients are excluded. Support reactions vary with position; no stiffness or deflection is invented. Arrow lengths have one fixed scale within each run.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical elapsed time:
Carriage coordinate from A:
Constant carriage horizontal speed:
Signed attachment A reaction · up positive:
Support B upward reaction:
Net vertical force on board:
Net moment about A:
Net moment about B:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Conditions, Reference Points and Feasibility

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Complete static equilibrium

Click to flip

Complete static equilibrium

A body at rest remains in static equilibrium when ΣFx = 0, ΣFy = 0 and Στ = 0. These are balance conditions, not a claim that every such problem has three independent unknowns or a unique solution.

Rule 2

Rotational equilibrium can include motion

Click to flip

Rotational equilibrium can include motion

For a fixed-inertia rigid system, zero net torque means constant angular velocity, which may be nonzero. Translational equilibrium similarly permits constant CM velocity. Neither condition alone gives full static equilibrium.

Rule 3

Choose a reference to simplify moments

Click to flip

Choose a reference to simplify moments

In static equilibrium, take moments about any convenient point. A force through that point has zero moment there but remains in force balance. Choosing B removes B’s moment, not the moment of A at a different point.

∫

Rule 4

Check support directions

Click to flip

Check support directions

A negative upward-positive reaction requires a downward force. A bolt or hold-down may supply it; a simple unilateral contact cannot. If a computed support reaction is impossible, the assumed static configuration is not feasible.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Zero resultant force is sufficient for a rigid body to be in static equilibrium.”

Myth 2: “Choosing a moment reference at one support eliminates every support force from all equations.”

6

✦ THE SECOND “AHA!” — Reference Points and Support Reactions

DOK 2 — Apply

Use force diagrams with application locations, then apply the appropriate static balance conditions.

Progress
0/4
Overhanging boardRigid horizontal boardLeft attachment AInterior support BLoad to the right of B
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Why Choose the Hinge?

A stationary beam has two hinge-force components and a cable away from the hinge. Why is the hinge useful as a moment reference?

2

Instructor Q2 — Negative Contact Reaction

A static calculation requires a downward force from a support that can only push upward. What should be concluded?

3

Instructor Q3 — Balance a Lever

A horizontal massless lever has a 120 N downward load 0.75 m left of its support. A second downward load is 0.50 m right of that support. Find its weight for static balance.

Lever givensLeft: 120 N at 0.75 mRight: W at 0.50 mMassless; static balance
Given conditions only; arrows and distances are schematic.
N
4

Instructor Q4 — Complete Force Balance

A statically balanced beam receives a downward attachment force 240 N and total downward weight 360 N. Find the other support’s upward reaction.

Force-balance givensAttachment: 240 N downTotal weight: 360 N downOther support: upwardStatic equilibrium
Given conditions only; arrows and distances are schematic.
N
7

✎ PRACTICE — Independent Static Cases and Report Audit

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Balanced Uniform Stick

A uniform horizontal stick is 1.20 m long and supported at x = 0.30 m. A 3.6 N downward load acts at its left end x = 0. The stick is at rest in static equilibrium. Find the stick’s weight.

Stick givensUniform length: 1.20 mSupport: x = 0.30 m3.6 N down at x = 0Static equilibrium
Given conditions only; arrows and distances are schematic.
N
DOK 2 — Application

Challenge 2: A Walker on a Bridge

A uniform 10 m horizontal bridge weighs 1200 N and is supported at both ends. A 400 N walker stands at x = 7.0 m from the left end. The bridge is in static equilibrium. Find the upward reaction of each support.

Bridge givensUniform length: 10 mBridge weight: 1200 NWalker: 400 N at x = 7 mEnd supports; at rest
Given conditions only; arrows and distances are schematic.
N
N
DOK 3 — Audit & Justify

Challenge 3: Audit an Overhang Report

A uniform horizontal board has length 4.5 m and weight 90 N. A 600 N load is at its right end. Hold-down attachment A is at x = 0; upward support B is at x = 1.5 m. The board is at rest. CCW moments and upward forces are positive. A report proposes RA = RB = +345 N, claiming zero net force proves equilibrium; says the board’s weight has zero moment because it is uniform; and says choosing B eliminates both support reactions. Find the correct signed reactions RA and RB, and the net moment about A for the report’s proposed reactions. Explain all three errors and why A must be a hold-down rather than a simple upward-only contact.

Overhang report givensL: 4.5 m; board: 90 NLoad: 600 N at x = 4.5 mA: x = 0; B: x = 1.5 mHold-down at A; at restCCW +; upward +
Given conditions only; arrows and distances are schematic.
N
N
N·m
8

☷ CHALLENGE — Sort Balance Tests and Support Constraints

DOK 2 — Apply

Sort Balance Tests and Support Constraints

Classify statements about static planar problems and rotational equilibrium.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why an overhanging board may need a downward left attachment and a larger upward interior support. Include both balance conditions, a useful moment reference and why a simple contact cannot replace a hold-down.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.