Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 7.1 · Density Measure net mass. Measure volume. Compare the ratio.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Ratio Can Test a Claim

An unknown liquid fills a small vial. A larger sample of the same uniform liquid, at the same temperature and pressure, has more mass and more volume. Why can those samples have the same density? Can a density measurement narrow the candidate list without uniquely proving the liquid’s identity?

Unknown sampleNet sample mass measuredSample volume measuredFixed sample conditions
Given conditions only; arrows and distances are schematic.

Model: Density is mass per volume. Treat each liquid sample as uniform, with constant density during a run. Temperature, pressure and composition are fixed. The simulator supplies a known model density and generates ideal measurements; real measurements have uncertainty. Liquids and gases are fluids because they can flow and have no fixed shape. An ideal fluid is incompressible and has no viscosity; real gases are usually compressible.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Three uniform liquid samples have equal volumes of 250 mL. Their net masses are A: 180 g, B: 250 g and C: 325 g. Rank their densities from least to greatest.

Equal-volume givensEach volume: 250 mLMass A: 180 gMass B: 250 gMass C: 325 g
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Filling Experiment on a Balance

DOK 2 — Investigate

Predict, measure and compare

Complete two runs with different target volumes but the same model density and flow rate. Then change only density from one of that pair. Measure three matched runs. Watch liquid flow into the graduated vessel while its level and gross balance reading rise. Compare net mass, volume and their ratio.

A uniform incompressible liquid enters a 500 mL vessel at the chosen constant volume flow rate. The vessel has a 50 g tare mass. Its gross balance reading includes that tare; its net liquid mass does not. The fill ends at the selected target volume, with duration = target volume divided by flow rate. Eight real seconds display one full physical run. The balance represents a quasi-static ideal mass measurement; pouring impact is ignored. At zero liquid volume, a measured density from net mass divided by volume is undefined. The known model density still sets the incoming liquid’s mass flow. No substance is identified solely from its density.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measured Net Mass vs Liquid Volume

Use the labelled readouts.

Measurements

Physical elapsed time:
Current liquid volume:
Gross balance reading:
Net liquid mass after tare subtraction:
Density from current measurements:
Measured density in SI units:
Volume flow rate:
Mass flow rate:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — The Ratio, the Measurement and the Units

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Density and its rearrangements

Click to flip

Density and its rearrangements

ρ = m/V, m = ρV and V = m/ρ. Use the sample’s net mass and corresponding volume. Density is a property of the material under specified conditions, not a measure of sample amount.

Rule 2

Tare and displacement

Click to flip

Tare and displacement

Subtract the empty container’s mass from a gross reading. For a fully submerged insoluble nonporous solid, the rise in liquid volume gives solid volume if no bubbles or spills occur.

Rule 3

Cubic volume conversions

Click to flip

Cubic volume conversions

1 mL = 1 cm³ = 10⁻⁶ m³; 1 L = 10⁻³ m³. Therefore 1 g/mL = 1000 kg/m³. Cubing a length conversion is essential when converting volumes.

∫

Rule 4

Conditions and identification

Click to flip

Conditions and identification

Density can change with temperature, pressure and composition. A measured density can support or reject candidates, but different materials or mixtures can share it; further evidence may be needed for unique identification.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “A larger sample of the same uniform liquid must be denser.”

Myth 2: “Matching a reference density uniquely proves a substance’s identity.”

6

✦ THE SECOND “AHA!” — Net Mass, Sample Volume and Conversions

DOK 2 — Apply

Use the sample’s own mass and volume. Treat reference values as given approximations under stated conditions.

Progress
0/4
Unknown sampleNet sample mass measuredSample volume measuredFixed sample conditions
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Find the Mass

A uniform sample has known density and volume. Which expression gives its net mass?

2

Instructor Q2 — A Gross Balance Reading

Which reading belongs in a liquid’s density calculation when a vessel sits on the balance?

3

Instructor Q3 — A Fresh Density

A uniform sample has net mass 156 g and volume 120 mL. Find its density in g/mL.

Sample givensNet mass: 156 gVolume: 120 mL
Given conditions only; arrows and distances are schematic.
g/mL
4

Instructor Q4 — Convert a Density

A density is 0.85 g/cm³. Express it in kg/m³.

Conversion givensDensity: 0.85 g/cm³Target units: kg/m³
Given conditions only; arrows and distances are schematic.
kg/m³
7

✎ PRACTICE — Independent Density Measurements

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Liquid Sample

A uniform liquid has density 0.840 g/mL at the stated conditions. A sample occupies 150 mL. Find its net mass in grams.

Liquid givensDensity: 0.840 g/mLSample volume: 150 mL
Given conditions only; arrows and distances are schematic.
g
DOK 2 — Application

Challenge 2: An Irregular Solid

An insoluble nonporous solid has mass 192 g. A graduated cylinder initially reads 40.0 mL and reads 65.0 mL after the solid is fully submerged, with no bubbles or spills. Find the solid’s volume in cm³ and its density in kg/m³.

Displacement givensSolid mass: 192 gInitial reading: 40.0 mLFinal reading: 65.0 mLFully submerged; no bubbles
Given conditions only; arrows and distances are schematic.
cm³
kg/m³
DOK 3 — Audit & Justify

Challenge 3: Audit a Liquid-Identification Report

An empty vessel has mass 54.0 g. With 120 mL of an unknown liquid, its gross mass is 198 g. At the same conditions, candidate A has a reference density range 1.16–1.24 g/mL and candidate B has range 1.18–1.22 g/mL. A report divides the gross mass by liquid volume, labels the resulting g/mL number directly as kg/m³, and claims that density uniquely identifies the liquid. Find the liquid’s net mass and correct density in both units. Explain all three errors and say what the candidate evidence supports.

Report givensEmpty vessel: 54.0 gGross mass: 198 gLiquid volume: 120 mLA: 1.16–1.24 g/mLB: 1.18–1.22 g/mL
Given conditions only; arrows and distances are schematic.
g
g/mL
kg/m³
8

☷ CHALLENGE — Sort the Measurements and the Interpretation

DOK 2 — Apply

Sort the Measurements and the Interpretation

Classify each statement by the main step it supports.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why doubling the amount of a uniform liquid at fixed conditions doubles its mass and volume but leaves density unchanged. Explain why a vessel’s tare is removed and why density alone may not identify an unknown liquid.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.