WONDER — The Mystery
Same Depth, Different Vessels
Two vessels contain the same static uniform liquid, with the same surface pressure and vertical liquid depth. One vessel is wider. Do their bottom pressures differ? Could their total bottom forces differ even when the pressures match? The distinction between pressure and force resolves the apparent paradox.
Model: Static fluid of uniform density within each layer; uniform gravitational field. Pressure increases downward. Depth means vertical distance below the chosen reference level. Absolute pressure includes the boundary pressure. Gauge pressure is absolute pressure minus a specified reference, usually local atmospheric pressure. The surface pressure need not equal that reference.
PREDICT — Commit to Your Answer
DOK 2 — PredictA narrow vessel and a wide vessel contain the same static uniform liquid to equal vertical depths, with the same surface pressure and g. Which comparison is correct?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Under the stated common conditions, bottom pressures match. For a horizontal base with uniform pressure, force equals pressure times base area. Equal pressure does not imply equal force at different areas.
▶ PLAY — Live Pressure-Probe Depth Scan
DOK 2 — InvestigatePredict, measure and compare
Measure two target depths with the same fluid density and surface pressure. Then change only density from one of that pair. Complete three matched scans. Watch the probe descend while hydrostatic increase, absolute pressure and gauge pressure update. Use the surface-pressure control to test when gauge pressure does or does not equal the hydrostatic increase.
An ideal small pressure probe is lowered at 0.25 m/s through an otherwise static uniform fluid. Probe disturbance is neglected; its controlled scan measures the equilibrium field and is not the fluid’s flow speed. Scan duration is target depth divided by 0.25 m/s, played over 8 real seconds. g = 9.8 m/s². Surface absolute pressure is supplied by a regulated cover; reference atmospheric pressure is fixed at 100 kPa. The vessel extends to 10 m; drawing scale is 18 pixels/m. The pressure increase below the surface is ρgh, absolute pressure is surface pressure plus that increase, and gauge pressure is absolute pressure minus the 100 kPa reference.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Absolute Pressure vs Vertical Depth
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Depth, Density, Boundary and Force
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
The hydrostatic difference
Click to flip
The hydrostatic difference
For a static uniform-density fluid, Δp = ρgΔh when Δh is measured downward. This pressure difference is independent of vessel shape. Use the vertical height difference, not an inclined path length.
Rule 2
Absolute and gauge pressure
Click to flip
Absolute and gauge pressure
Pabsolute = Psurface + ρgh. Pgauge = Pabsolute − Preference. Only when Psurface equals the gauge reference does Pgauge = ρgh. Zero gauge pressure does not mean zero absolute pressure.
Rule 3
Layered fluids and derivation
Click to flip
Layered fluids and derivation
Balance a static fluid slab: the pressure difference times its area supports its weight. With m = ρAΔh, the area cancels. For layers, add each layer’s ρgΔh using its own density and vertical thickness.
Rule 4
Equal pressure is not equal force
Click to flip
Equal pressure is not equal force
Common density, depth, g and surface pressure give equal pressures. A uniform pressure over different base areas gives different forces. Sloping walls may supply vertical forces; their effects do not change the hydrostatic depth relation.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Gauge pressure always equals ρgh.”
Correct — the claim is false.
False. It does when the surface pressure equals the chosen gauge reference. A pressurized or reduced-pressure cover adds an offset. Absolute pressure and pressure increase must be distinguished.
Myth 2: “A wider vessel must have more bottom pressure because it contains more liquid.”
Correct — the claim is false.
False under the same static density, vertical depth, g and surface pressure. Bottom pressure is unchanged, but total base force depends on base area. In a straight vertical-walled vessel, extra water weight is supported by extra base area, not by a vertical force from vertical walls.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Hydrostatic Differences and References
DOK 2 — ApplyState whether the requested quantity is a pressure difference, an absolute value or a gauge value.
Instructor Q1 — The Relevant Distance
A static fluid connects two measurement points by an inclined pipe. Which distance sets the hydrostatic pressure difference?
Instructor Q2 — Doubling Depth
An open static liquid has its surface at the atmospheric gauge reference. At fixed density and g, doubling depth does what?
Instructor Q3 — A Fresh Pressure Increase
A static liquid has density 900 kg/m³. Point B is 2.0 m vertically below point A. Take g = 10 m/s². Find PB − PA in Pa.
Instructor Q4 — An Absolute Reading
Surface absolute pressure is 110 kPa. A uniform static liquid adds 25 kPa from the surface to the probe. Find probe absolute pressure in kPa.
4/4 — Instructor Questions Completed
Hydrostatic pressure differences use vertical depth. Absolute and gauge values also require their boundary and reference pressures.
✎ PRACTICE — Independent Hydrostatic Cases
DOK 1–3 — PracticeChallenge 1: A Lower Static-Pipe Point
A fully filled static water pipe has gauge pressure 35.0 kPa at point A. Point B is 6.0 m vertically below A. Water density is 1000 kg/m³ and g = 10 m/s². Both gauge readings use the same atmospheric reference. Find the gauge pressure at B in kPa.
Step-by-Step Solution
The pressure increase downward is 1000(10)(6.0) = 60000 Pa = 60.0 kPa. Gauge pressure at B is 35.0 + 60.0 = 95.0 kPa. The pipe is static; no flow losses are included.
Challenge 2: A Sealed Tank
A sealed tank contains uniform static liquid of density 800 kg/m³. Gas above it maintains a surface absolute pressure of 120 kPa. A probe is 3.0 m vertically below the surface. The gauge reference is 100 kPa atmospheric pressure. Take g = 10 m/s². Find the probe’s absolute and gauge pressures in kPa.
Step-by-Step Solution
The hydrostatic increase is 800(10)(3.0) = 24000 Pa = 24.0 kPa. Absolute pressure is 120 + 24 = 144 kPa. Gauge pressure is 144 − 100 = 44 kPa, not 24 kPa because the surface is already 20 kPa above the reference.
Challenge 3: Audit a Two-Layer Pressure Report
A static tank has 0.40 m of oil of density 800 kg/m³ above 0.60 m of water of density 1000 kg/m³. Its surface absolute pressure is 130 kPa, the atmospheric gauge reference is 100 kPa, and g = 10 m/s². A sloping line from the surface to the bottom is 1.50 m long. A report uses that line length as depth, uses the water density for both layers, and calls its pressure increase from the surface the bottom gauge pressure. Find the correct hydrostatic increase, bottom absolute pressure and bottom gauge pressure in kPa. Explain all three errors.
Step-by-Step Solution
Increase = 800(10)(0.40) + 1000(10)(0.60) = 3200 + 6000 = 9200 Pa = 9.20 kPa. Bottom absolute pressure = 130 + 9.20 = 139.20 kPa; gauge pressure = 139.20 − 100 = 39.20 kPa.
The 1.50 m sloping line is not the vertical depth. Each layer requires its own density and vertical thickness. Gauge pressure is relative to the atmospheric reference, not automatically relative to the liquid surface. The 30 kPa surface gauge offset remains in the bottom reading.
☷ CHALLENGE — Sort Height, Boundary and Force Statements
DOK 2 — ApplySort Height, Boundary and Force Statements
Keep the local pressure difference separate from reference values and total force.
0 / 6 correct
Physics Insight
A single phrase such as “the pressure” is insufficient until the reference and location are known.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why equal vertical depths in the same static liquid can give equal pressure in vessels of different widths. Explain why total base force can still differ, and why a sealed tank’s gauge pressure may not equal the increase from its surface.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 7.3 — Hydrostatic Pressure
Use vertical depth and the correct reference pressure.
1. Derive the hydrostatic difference
Consider a static fluid slab of area A and vertical thickness Δh. With downward depth increasing, the lower pressure exceeds the upper pressure. Static vertical force balance gives (Plower − Pupper)A = mg. Uniform density gives m = ρAΔh, so area cancels.
Δp = ρgΔh, positive for the lower point
This requires a static fluid, uniform density over the interval and uniform g. It is a pressure difference, not automatically an absolute or atmospheric-gauge value. The distance is vertical height difference, not distance along a curved or inclined pipe.
2. Boundary and gauge reference
Pabsolute = Psurface + ρgh; Pgauge = Pabsolute − Preference
If the surface is open to the same atmosphere used as the gauge reference, surface gauge pressure is zero and Pgauge = ρgh. A pressurized or reduced-pressure gas cover supplies an offset. Zero gauge pressure means equality with the reference; it does not mean a vacuum. Negative gauge pressure means below the reference and can still have positive absolute pressure.
The simulator uses a fixed 100 kPa atmospheric reference and lets surface absolute pressure vary. That is a supplied model value, not a claim that every local atmosphere is 100 kPa. Changing surface pressure shifts the whole absolute-pressure-versus-depth line; changing density changes its slope.
3. The shape paradox, resolved
Under the same static density, g, surface pressure and vertical depth, bottom pressure is independent of vessel width and shape. Bottom force is not independent of area: for a horizontal base with uniform pressure, F = PA. Equal pressure over different base areas gives different forces.
In a straight vertical-walled vessel, walls supply no vertical pressure-force component, and the bottom’s net upward force supports the fluid weight. A wider vessel has more weight and proportionally more base area, leaving the pressure increase unchanged. Sloping walls can supply vertical components: outward-flaring walls can support some of the liquid weight; inward-flaring walls can exert a downward component. It is incorrect to claim all extra water is always supported by every wall shape.
4. More than one density
For immiscible static layers, add each layer’s ρg times vertical thickness, with pressure continuous across an ordinary planar interface when surface-tension effects are neglected. A single density cannot replace distinct layers without a justified average.
The practice layers give 3.20 kPa from oil and 6.00 kPa from water, totaling 9.20 kPa. A surface absolute pressure of 130 kPa gives bottom absolute pressure 139.20 kPa. Relative to 100 kPa atmosphere, bottom gauge pressure is 39.20 kPa. The 1.50 m sloping line is irrelevant to the vertical pressure increase.
5. Proportional reasoning
At fixed density and g, doubling vertical depth doubles the pressure increase from the surface. It does not double absolute pressure when a nonzero surface offset remains. At fixed depth and g, doubling density doubles the hydrostatic increase. Moving upward reverses the sign of the difference.
For nonuniform density, add appropriate small-layer contributions instead of assuming one constant ρ. Actual atmospheric density changes with height, so a constant-density slab is not a universal atmospheric model. Flowing pipes can require additional dynamic and loss terms; the static relation alone is not a full flowing-pipe prediction.
6. Applications and limitations
A dam’s water-side pressure increases with vertical depth. Net wall loading depends on the pressure on both sides, and complete design requires force distribution and structural analysis. A static connected water-tower system gains pressure at lower points; during flow, ideal energy terms and real losses can change readings.
A biological fluid is not generally static. A hydrostatic height contribution can be estimated in a specified simplified model, but it is not a complete explanation of circulation, swelling or dizziness. This mission uses controlled tank and pipe examples without diagnostic claims.
7. Live measurement scan
The probe descends at 0.25 m/s in an otherwise static 10 m column, neglecting its disturbance. Its measured depth and pressure follow the same physical time. The vessel’s drawing scale is 18 pixels/m. Density and boundary pressure stay fixed within a scan. The graph shows absolute pressure, so its zero-depth intercept is the regulated surface pressure, not zero.
Scan duration is target depth divided by 0.25 m/s, shown over 8 real seconds. Run, pause, step and reset inspect the same probe state. Compare two target depths, then density, while other controls remain fixed. Three matched completed scans unlock the next stage; presets alone give no credit.
8. Course scope
AP Physics 1 topic 8.2 includes absolute and gauge pressure in ideal fluids. Cambridge AS Level 9702 topic 4.3 requires deriving and using Δp = ρgΔh. Layer-by-layer accounting applies that same relation under stated assumptions. Pressure gauges are developed in Mission 7.4.
✓ Crest’s Checklist
- I use vertical depth rather than path length.
- I check static-fluid and density assumptions.
- I distinguish a pressure increase from an absolute value.
- I state the gauge reference.
- I include any surface pressure offset.
- I apply each layer’s own density and thickness.
- I distinguish pressure from total force.
— Crest ☆ “Use vertical depth and the correct reference pressure.”
Mission 7.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Hydrostatic Pressure
Hydrostatic pressure differences use vertical depth. Absolute and gauge values also require their boundary and reference pressures.