WONDER — The Mystery
More Force Without More Energy
A hydraulic system uses a small piston to exert a larger force on a larger piston. What must happen to the corresponding travel distances? Why does a vertical lift also need to account for fluid height differences as one piston descends and the other rises?
Model: Quasi-static connected incompressible fluid, frictionless massless pistons and a common external atmospheric pressure. Applied pressure changes are transmitted in the ideal equilibrium model. Total pressure still varies with vertical height. Neglect inertia, leaks and compressibility. The live vertical lift keeps its hydrostatic correction and fluid gravitational-energy change; equal-height or horizontal examples can use the simpler equal-pressure relation.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo frictionless horizontal pistons have their axes at the same height and share an enclosed incompressible fluid. The output piston area is five times the input area. In quasi-static lossless motion with common exterior pressure, how do output force and output travel compare with input values?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
At the same height, Fout/Fin = Aout/Ain = 5. Incompressibility gives Ain din = Aout dout, so dout = din/5. With no losses or fluid height-energy change, input work equals output work.
▶ PLAY — Live Vertical Lift with Height and Energy Accounting
DOK 2 — InvestigatePredict, measure and compare
Compare two output areas with the same input force and input area. Then change only input force from one of that pair. Complete three matched runs. Watch the input piston descend while the output piston rises. Measure displaced volume, the growing height separation, pressure difference, output force and energy transfers.
Both piston faces start at the same height. Input force and areas stay fixed, while a controlled input stroke moves downward at 0.020 m/s for 0.200 m: 10 physical seconds over 8 real seconds. The external output load is regulated to balance the available force at each position, rather than representing a fixed car weight. Fluid density is 800 kg/m³ and g = 10 m/s². Both piston exteriors share atmosphere, and all pressures displayed are gauge values. Input travel x gives output rise (A1/A2)x. Their vertical separation is x plus that rise. Output gauge pressure is input gauge pressure minus ρg times this separation. Integrated output work equals input work minus the fluid’s gravitational-energy increase; no losses or inertia are included. Widths represent square-root area and vertical displacement uses 400 pixels/m.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Cumulative Work vs Input Travel
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Pressure Changes, Geometry, Travel and Energy
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Pascal’s principle
Click to flip
Pascal’s principle
An applied pressure change in an enclosed equilibrium fluid is transmitted throughout it in the ideal model. This concerns a change; it does not make total pressure equal at different vertical heights.
Rule 2
Force uses area
Click to flip
Force uses area
At the same height and common exterior pressure, F1/A1 = F2/A2. Circular piston area is πr², so force ratio uses the square of radius ratio. At unequal heights, include the hydrostatic correction with its sign.
Rule 3
Volume fixes the travel ratio
Click to flip
Volume fixes the travel ratio
For incompressible fluid with no leaks, A1d1 = A2d2. Larger output area gives shorter output travel. This geometrical relation survives the height correction in the vertical model.
Rule 4
Account for energy stores
Click to flip
Account for energy stores
At common height with no losses or fluid gravitational-energy change, input work equals output work. A finite vertical stroke can change fluid gravitational energy. The live model satisfies Win = Wout + ΔUfluid, not automatic equality of the two work terms.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Pascal’s principle makes total pressure identical at every height.”
Correct — the claim is false.
False. At fixed geometry, a pressure increment is transmitted throughout the ideal fluid, while the pre-existing hydrostatic gradient remains. A lower point has greater pressure than a higher point in a static uniform fluid.
Myth 2: “A larger output force proves that the lift creates extra work.”
Correct — the claim is false.
False. Output travel is smaller. In a vertical stroke, fluid gravitational energy can also increase; leaks or friction can introduce losses in real systems. Force is not energy, and newtons are not pressure units.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Hydraulic Ratios with Conditions
DOK 2 — ApplyState the height and loss assumptions before using the simplest hydraulic relations.
Instructor Q1 — What Is Transmitted?
What does Pascal’s principle transmit in its ideal equilibrium model?
Instructor Q2 — Circular Pistons
In a same-height ideal system, output piston radius is three times input radius. What is the area ratio?
Instructor Q3 — A Fresh Same-Height Force
At the same height, input force is 40 N, input area is 0.0040 m² and output area is 0.024 m². Massless frictionless pistons share exterior pressure. Find balanced output force.
Instructor Q4 — The Displacement Trade
An ideal horizontal system has output area eight times input area. Input travel is 0.160 m. Find output travel.
4/4 — Instructor Questions Completed
A hydraulic system can amplify force by trading travel. Total pressure and energy still require height and store accounting.
✎ PRACTICE — Independent Hydraulic Cases
DOK 1–3 — PracticeChallenge 1: An Equal-Height Balance
Two stationary massless frictionless pistons are at the same height and share exterior atmospheric pressure. Input force is 45.0 N, input area is 0.0030 m² and output area is 0.0180 m². Find input gauge pressure in kPa and balanced output force in N.
Step-by-Step Solution
Input gauge pressure = 45.0/0.0030 = 15000 Pa = 15.0 kPa. The output is at the same height, so output force = 15000(0.0180) = 270 N.
Challenge 2: Circular Pistons and Travel
An ideal lossless quasi-static system has horizontal circular piston axes at the same height. Balanced input and output forces are 40.0 N and 360 N. Input travel is 0.240 m. Find output-to-input area ratio, output-to-input radius ratio, output travel and output work. Both exteriors share atmospheric pressure.
Step-by-Step Solution
Area ratio = 360/40.0 = 9. Radius ratio = √9 = 3. Output travel = 0.240/9 = 0.02667 m. Output work = 360(0.02667) = 9.60 J, equal to input work 40.0(0.240) = 9.60 J in this horizontal ideal model.
Challenge 3: Audit an Elevated Output Piston
A quasi-static ideal hydraulic system has input force 36.0 N, input area 0.0010 m² and output area 0.0090 m². The pistons are circular. At the instant considered, the output face is 0.60 m above the input face. Liquid density is 1000 kg/m³, g = 10 m/s² and both exteriors share atmospheric pressure. An input stroke is 0.090 m with no leaks. A report uses the radius ratio instead of area ratio to relate forces, assumes equal total piston pressures despite the height difference, and says force amplification creates extra energy. Find area ratio, output gauge pressure at the stated instant, balanced output force at that instant, and output travel for the stroke. Explain all three errors, including the energy trade.
Step-by-Step Solution
Area ratio = 0.0090/0.0010 = 9; radius ratio is 3, which is not the force-area factor. Input gauge pressure = 36.0/0.0010 = 36000 Pa. The higher output has 1000(10)(0.60) = 6000 Pa less pressure, giving output gauge pressure 30000 Pa = 30.0 kPa.
Balanced output force = 30000(0.0090) = 270 N. At this height, the force ratio is 7.5, smaller than the area ratio 9 because the hydrostatic correction matters. Volume conservation gives output travel = 0.090/9 = 0.0100 m.
The report confuses radius with area and omits the pressure drop to the higher piston. More force does not create energy: output travel is smaller, and a finite vertical stroke can also change fluid gravitational energy. The quoted 270 N is an instantaneous load, not a guarantee that the output load remains constant over the whole stroke.
☷ CHALLENGE — Sort Pressure, Volume and Energy
DOK 2 — ApplySort Pressure, Volume and Energy
Classify each statement by the conservation or equilibrium idea it uses.
0 / 6 correct
Physics Insight
Equal displaced volume remains valid even when pressure differs between vertically separated piston faces.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain how a hydraulic system can provide a larger output force without creating energy. Distinguish area from radius, and explain why vertically separated moving pistons need a pressure correction and fluid-energy accounting.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 7.5 — Pascal’s Principle
Transmit pressure changes. Trade force for travel.
1. What Pascal’s principle means
An applied pressure change in an enclosed equilibrium fluid is transmitted throughout the fluid in the ideal model. It does not erase the hydrostatic pressure gradient. A pressure increment at fixed geometry can be common while total pressures at different heights are unequal.
Real transmission has finite time and real systems can have compressibility, inertia, leaks and losses. This mission uses quasi-static incompressible motion after those effects are neglected. “Undiminished change” does not imply infinite instantaneous signal speed in a real fluid.
2. Force and pressure
At equal height and common exterior pressure: F1/A1 = F2/A2
The displayed forces are net applied or supported loads on massless pistons. The common atmospheric forces cancel in their equilibrium, so the relevant displayed pressures are gauge values. Force is in N and pressure in Pa; they are not interchangeable.
Circular area is πr². A radius ratio of 3 means area ratio 9. At equal height the force ratio matches area ratio, not radius ratio. The practice equal-height case gives 15.0 kPa and 270 N.
3. Unequal-height correction
P2 = P1 − ρg(y2 − y1)
For the same exterior pressure, use this relation with gauge pressures too. Output above input means lower output pressure; output below input means higher output pressure. State which face is higher rather than quoting an unsigned correction.
The audited elevated-output case has input pressure 36.0 kPa and output 0.60 m higher. The 6.00 kPa drop gives output pressure 30.0 kPa and output force 270 N. Its force ratio is 7.5 while its area ratio is 9: equal-pressure force multiplication is not exact at this height.
4. Travel and displaced volume
A1d1 = A2d2, for no leaks and incompressible fluid
A larger output piston moves a shorter distance for the same displaced volume. This geometric relation does not require equal piston pressure. In the audited case, input travel 0.090 m gives output travel 0.010 m. A pump’s cycle count additionally requires its delivered volume per stroke and the required output volume; no universal pump count follows from force ratio alone.
5. Work and energy
For horizontal piston motion at the same height, with no energy losses or fluid gravitational-energy change, input and output work match. In the horizontal practice, 40.0 N over 0.240 m supplies 9.60 J; the 360 N output moves 0.02667 m and does 9.60 J.
A finite vertical stroke changes fluid height distribution, so input work need not equal output work by itself. A changing output force requires integrating force over travel, rather than multiplying one instantaneous force by a whole stroke. Include fluid gravitational energy and any real losses in the full account.
6. The faithful live vertical model
Let x be input downward travel and R = A1/A2. Output rise is Rx. Both faces start level, so height separation becomes (1 + R)x. Constant input force gives P1 = F1/A1. Output pressure is P1 − ρg(1 + R)x and the regulated load is A2P2. The load is allowed to vary; a fixed car weight would be a different dynamical problem.
ΔUfluid = ½ρgA1(1 + R)x²; Wout = F1x − ΔUfluid
The energy expression follows from the changed gravitational energy in the two cylindrical fluid columns. The animation uses the same x for actual piston positions, volume displacement, force and cumulative work. Input work equals output work plus this fluid energy increase, with no losses.
Fluid density is 800 kg/m³ and g = 10 m/s². Input speed is controlled at 0.020 m/s for a 0.200 m stroke. All allowed controls keep output pressure positive. The 10-physical-second stroke is played over 8 real seconds. Vertical scale is 400 pixels/m and piston widths scale with square-root area.
Compare two output areas, then input force, keeping other controls fixed. Three matched completed runs unlock the next stage; preset loading earns no credit. Pause, step and reset inspect the same physical state.
7. Course scope
Pascal’s principle and hydraulic instruments apply pressure, hydrostatics and conservation ideas. They are enrichment linked to AP Physics 1 Unit 8 and Cambridge AS Level 9702 topic 4.3, rather than additional named syllabus requirements. The supplied vertical-fluid energy expression supports accurate live motion; memorizing its derivation is not required.
✓ Crest’s Checklist
- I distinguish pressure changes from total pressure.
- I state the height and exterior-pressure assumptions.
- I use area rather than radius for force ratios.
- I preserve displaced volume when finding travel.
- I use the correct sign for the hydrostatic correction.
- I distinguish instantaneous force from total work.
- I include fluid energy changes and any stated losses.
— Crest ☆ “Transmit pressure changes. Trade force for travel.”
Mission 7.5 Complete! · All 10 levels cleared · PHYSICS CREST
★ Master of Pascal’s Principle
A hydraulic system can amplify force by trading travel. Total pressure and energy still require height and store accounting.