WONDER — The Mystery
Two Objects, One Final Temperature
A warm small block and a cool larger block touch inside an insulated enclosure. Which way does energy transfer, and is the final temperature their simple arithmetic mean? At equilibrium, must their total internal energies be equal?
Model: For an isolated pair with no work or phase change and constant heat capacities CA and CB, signed energy transfers sum to zero. Thermal equilibrium means equal temperature and zero net thermal energy transfer; microscopic exchange can continue. The equilibrium temperature is weighted by heat capacity. Heat capacity C = mc is introduced here for the balance; Mission 8.4 develops calorimetry.
PREDICT — Commit to Your Answer
DOK 2 — PredictObjects A and B touch in an insulated container. A is at 70°C and B at 20°C. B has much greater mass. What is the initial spontaneous net thermal-energy transfer?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The net thermal energy transfer is from higher-temperature A to lower-temperature B. This direction is independent of which object has greater mass or total internal energy.
▶ PLAY — Live Two-Body Thermal Contact
DOK 2 — InvestigatePredict, measure and compare
Complete two runs changing only A’s initial temperature, then a third changing only A’s heat capacity from one of that pair. Watch both thermometer columns move and the energy-transfer markers slow as the temperature difference shrinks.
A and B remain internally uniform with constant heat capacities. B begins at 20°C with CB = 400 J/K. The isolated pair exchanges energy through a contact with constant conductance G = 2 W/K; no work, environmental loss or phase change occurs. Define D = TA0 − TB0 and τ = CA CB/[G(CA + CB)]. Then TA − TB = D e^(−t/τ), and energy conservation fixes their weighted mean. The 600 s observation plays over 8 real seconds. Thermometer heights show their actual temperatures. Moving contact markers are schematic cumulative energy indicators: each 500 J shifts their repeating phase by one cycle; they are not physical particles or quantized heat packets. At the finite endpoint a small residual difference may remain.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — State, Transfer and Equilibrium
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Heat crosses a boundary
Click to flip
Heat crosses a boundary
Heat Q is energy transferred because of a temperature difference. Internal energy U belongs to the system’s microscopic state. In a closed system, ΔU = Q + Won, with Q and work positive into the system.
Rule 2
Spontaneous net transfer is hot to cold
Click to flip
Spontaneous net transfer is hot to cold
Temperature difference determines the net thermal-transfer direction. Individual microscopic exchanges can occur both ways. Mass and heat capacity affect the temperature changes, not the initial direction.
Rule 3
Thermal equilibrium is equal temperature
Click to flip
Thermal equilibrium is equal temperature
For systems in thermal contact, equilibrium means no net thermal energy transfer. It does not require equal mass, equal internal energy, equal particle speed or the end of microscopic exchanges.
Rule 4
Use the whole energy balance
Click to flip
Use the whole energy balance
For an isolated pair with no work or phase changes, CA(Tf − TA0) + CB(Tf − TB0) = 0. Tf is a heat-capacity-weighted mean. Zeroth law: equilibrium with the same third system implies equilibrium with each other.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “At thermal equilibrium every particle has stopped exchanging energy.”
Correct — the claim is false.
False. Microscopic motion and exchanges continue; the net thermal transfer between equilibrium systems is zero.
Myth 2: “Opening a door cannot let cold air enter, because cold does not flow.”
Correct — the claim is false.
False. Air can move into or out of a room and carry energy by bulk flow. Cold is not a separate transferable substance. For thermal transfer alone, the spontaneous net direction is from warmer to cooler regions.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Signs, Equilibrium and Conservation
DOK 2 — ApplyState the system boundary and distinguish net transfer from microscopic events.
Instructor Q1 — Equilibrium Test
A and B are each in thermal equilibrium with thermometer C. What follows?
Instructor Q2 — Energy Into a Closed System
A closed object gains 300 J by heating and has 50 J of work done on it. What is its internal-energy change?
Instructor Q3 — Signed Energy Change
A closed block loses 750 J by thermal transfer. No work is done. Find its signed internal-energy change.
Instructor Q4 — Isolated Pair
In an isolated two-object pair, A loses 1350 J and no work is done. Find the energy gained by B.
4/4 — Instructor Questions Completed
Equal temperature establishes thermal equilibrium, while energy conservation establishes how the pair gets there.
✎ PRACTICE — Independent Thermal Balances
DOK 1–3 — PracticeChallenge 1: A Closed Block
A closed block receives 920 J by heating and does 120 J of work on its surroundings. Find its signed internal-energy change.
Step-by-Step Solution
Q = +920 J. Work done on the block is −120 J. ΔU = Q + Won = 920 − 120 = +800 J.
Challenge 2: Unequal Heat Capacities
Two internally uniform objects contact in an isolated enclosure. A begins at 75°C with heat capacity 300 J/K. B begins at 15°C with heat capacity 900 J/K. No work or phase change occurs. Find the final equilibrium Celsius temperature and the energy gained by B.
Step-by-Step Solution
300(Tf − 75) + 900(Tf − 15) = 0, giving Tf = 30°C. B gains 900(30 − 15) = 13500 J. A loses the same amount.
Challenge 3: Audit an Equilibrium Report
An isolated pair has A at 80°C with heat capacity 200 J/K and B at 20°C with heat capacity 600 J/K. No work or phase change occurs. A report takes the arithmetic mean temperature, says equilibrium proves equal total internal energy, and says energy exchanges stop at the microscopic level. Find the equilibrium temperature, signed internal-energy change of A and energy gained by B. Explain all three errors.
Step-by-Step Solution
Tf = [200(80) + 600(20)]/800 = 35°C. ΔUA = 200(35 − 80) = −9000 J; B gains 600(35 − 20) = 9000 J.
An arithmetic mean only applies when the two heat capacities are equal under these conditions. Equilibrium establishes equal temperature, not equal total internal energy. Microscopic exchanges continue in both directions; their net thermal transfer is zero.
☷ CHALLENGE — Sort Thermal State, Transfer and Balance
DOK 2 — ApplySort Thermal State, Transfer and Balance
Classify each statement by what it describes.
0 / 6 correct
Physics Insight
Keep state and process quantities distinct.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain thermal equilibrium, the zeroth law and why equal temperature need not mean equal internal energy. Include net versus microscopic transfer and how unequal heat capacities set an isolated pair’s final temperature.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 8.2 — Heat & Thermal Equilibrium
Track energy transfer. Distinguish equal temperature from equal energy.
1. Choose a system and signs
Heat Q is energy transferred by thermal processes because of temperature difference. Internal energy U is associated with microscopic kinetic and potential energies of the system. For a closed system, ΔU = Q + Won: heating into the system and work done on it are positive. Work done by it is negative in this convention.
2. Thermal contact and equilibrium
Thermal contact allows energy transfer by conduction, convection or radiation. Spontaneous net thermal transfer is from higher to lower temperature. At equilibrium, temperatures are equal and net thermal transfer is zero; microscopic motion and exchanges continue. Equal temperature does not imply equal particle speeds or equal internal energies.
The zeroth law says two systems separately in equilibrium with a third are in equilibrium with each other. This supports thermometer use. Mass and heat capacity affect final temperature and how fast temperature changes; they do not reverse the spontaneous initial net transfer.
3. Avoid misleading everyday language
Cold is not a substance stored or transferred. Air itself can move and carry energy, so cold air can physically enter an open room. Heat transfer and bulk mass transfer are distinct terms in a full energy balance. A finite isolated pair does not necessarily finish at room temperature; an object in a large room can instead approach the room’s effectively fixed temperature.
4. Isolated two-body balance
CA(Tf − TA0) + CB(Tf − TB0) = 0
Tf = (CA TA0 + CB TB0)/(CA + CB)
Assume constant heat capacities, uniform temperatures, no work, no phase change and no environmental loss. Celsius readings can be used consistently in this weighted mean because the Kelvin offsets cancel. Temperature differences have the same numerical value in K and °C. Equal energy lost and gained refers to the isolated pair; a calorimeter or the environment may need additional terms.
5. Worked independent cases
The closed block gains 920 J by heating and loses 120 J through work: ΔU = +800 J. The 300 J/K and 900 J/K pair reaches 30°C; B gains 13500 J.
The report audit reaches 35°C: A changes by −9000 J and B gains +9000 J. The incorrect 50°C arithmetic mean ignores unequal heat capacities. Equilibrium establishes equal temperature, not equal total internal energy or stopped microscopic exchanges.
6. Live thermal-contact model
CB = 400 J/K and TB0 = 20°C. Conductance G = 2 W/K gives instantaneous net rate G(TA − TB), with dTA/dt = −G(TA − TB)/CA and dTB/dt = G(TA − TB)/CB. The weighted mean remains constant.
τ = CA CB/[G(CA + CB)]; D(t) = D0e^(−t/τ)
TA = Tf + CB D/(CA + CB); TB = Tf − CA D/(CA + CB). Transferred energy = CA(TA0 − TA) = CB(TB − TB0). The 600-second endpoint uses this finite-time expression, not exact equality. Read the remaining difference and transfer rate.
Thermometer columns move with actual temperatures. The schematic contact markers shift one phase cycle per 500 J of cumulative net transfer; they do not model gas collisions or discrete heat quanta. Six hundred physical seconds play over eight real seconds. Compare initial temperature, then heat capacity; three matched completed runs unlock the next stage. This exponential contact model is enrichment rather than a required syllabus equation.
7. Course scope
Cambridge A Level 9702 topic 14.1 covers thermal equilibrium, with 16.1–16.2 supporting internal energy and energy balance. AP Physics 2 topic 9.3 covers thermal contact, net transfer and equilibrium; topic 9.4 supports the first-law balance. Calorimetry is developed in the later specific-heat lesson.
✓ Crest’s Checklist
- I distinguish heat from internal energy.
- I state the system and work sign convention.
- I identify spontaneous net transfer direction.
- I explain zero net transfer without stopping microscopic exchange.
- I use heat capacities to weight the final temperature.
- I include every object in the energy balance.
— Crest ☆ “Track energy transfer. Distinguish equal temperature from equal energy.”
Mission 8.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ Heat & Thermal Equilibrium Master
Equal temperature establishes thermal equilibrium, while energy conservation establishes how the pair gets there.