WONDER — The Mystery
Three Ways Energy Can Travel
A metal spoon conducts energy along its handle, moving fluid carries energy through a room, and sunlight reaches Earth across space. A vacuum reduces two mechanisms across its gap but still permits radiation. What must a flask do about the remaining paths?
Model: Conduction transfers energy through matter without bulk material transport. Convection involves bulk fluid motion. Thermal radiation is electromagnetic and needs no material medium. Multiple mechanisms can act together. Rate calculations use stated steady conditions, fixed temperatures and supplied material data.
PREDICT — Commit to Your Answer
DOK 2 — PredictAn ideal evacuated gap separates two flask walls. Which thermal-transfer mechanism can still cross that gap?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Radiation can cross the gap. Real flasks also have residual gas and conduction through necks or supports, so a practical vacuum reduces transfer rather than stopping all losses.
▶ PLAY — Three Live Thermal-Transfer Scenes
DOK 2 — InvestigatePredict, measure and compare
Watch conduction energy markers, a circulating fluid loop and radiation indicators move together. Complete two runs changing only hot temperature, then a third changing only slab thickness. Compare the three rate readouts; thickness affects only the separate slab experiment.
Three separate ideal experiments share a hot temperature and a 20°C cold reservoir. Conduction: steady uniform slab with k = 0.20 W/(m K), A = 0.050 m² and selected thickness L; rate = kAΔT/L. Convection: a maintained moving-fluid exchange uses supplied h = 5.0 W/(m² K), the same A and rate hAΔT. Its prescribed 0.80 m loop circulates at 0.020 m/s; this illustrates bulk transport and does not solve buoyancy or predict h. Radiation: a grey surface with emissivity 0.80 and area A faces a large surrounding enclosure at the cold temperature, with rate εσA(Th⁴ − Tc⁴), σ = 5.670374419 × 10⁻⁸ W/(m² K⁴); use Kelvin. The constant-temperature reservoirs sustain each rate. Conduction and radiation markers shift one repeating phase per 100 J of accumulated net transfer; they are schematic energy indicators, not particle or light speeds. Twenty physical seconds play over eight real seconds.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Mechanisms and Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Conduction through matter
Click to flip
Conduction through matter
Microscopic interactions transfer energy through matter; metals also have mobile charge carriers that aid thermal conduction. Steady one-dimensional slab rate = kAΔT/L under maintained endpoint temperatures.
Rule 2
Convection moves fluid
Click to flip
Convection moves fluid
Fluid bulk motion transports energy. Natural convection depends on density differences and gravity; warmer fluid often becomes less dense. Forced convection uses a fan or pump. “Heat rises” is not a general transfer law.
Rule 3
Radiation can cross vacuum
Click to flip
Radiation can cross vacuum
Matter at nonzero Kelvin temperature emits thermal electromagnetic radiation. Both warm and cool objects radiate; net exchange depends on both. Thermal radiation includes a spectrum, not exclusively infrared.
Rule 4
A flask reduces multiple paths
Click to flip
A flask reduces multiple paths
An evacuated gap suppresses gas conduction and convection. Low-emissivity reflective walls reduce radiative exchange; an insulated lid limits neck conduction, air exchange and evaporation. Real supports and residual gas still permit losses.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Heat naturally rises, so a hot object cannot warm something below it.”
Correct — the claim is false.
False. Thermal conduction and radiation can transfer energy downward. It is warmer fluid that often rises through buoyancy; direction depends on density, gravity and geometry.
Myth 2: “A 0°C object emits no thermal radiation.”
Correct — the claim is false.
False. 0°C is 273.15 K. It emits radiation and also absorbs radiation from its surroundings; its net transfer depends on both temperatures and surface properties.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Mechanism and Rate Detective
DOK 2 — ApplySeparate the mechanism from any rate formula and include the specified conditions.
Instructor Q1 — Same-Temperature Surfaces
A metal and a wooden surface are both cooler than your skin at the same temperature. Why may metal feel colder?
Instructor Q2 — Moving Fluid
A fan drives air across a hot surface. Which description applies to the air’s bulk energy transport?
Instructor Q3 — A Steady Slab
A steady slab has k = 0.30 W/(m K), A = 0.020 m², L = 0.010 m and maintained endpoint temperature difference 40 K. Find its conduction rate.
Instructor Q4 — Energy at Constant Rate
A maintained steady transfer rate is 18 W for 90 s. Find energy transferred.
4/4 — Instructor Questions Completed
Identify the actual transport mechanism and its conditions; more than one can operate at the same time.
✎ PRACTICE — Independent Thermal-Transfer Cases
DOK 1–3 — PracticeChallenge 1: A Maintained Slab
A uniform slab conducts steadily between maintained temperatures with difference 50 K. Its k = 0.40 W/(m K), area 0.060 m² and thickness 0.040 m. Find conduction power and energy transferred in 60.0 s.
Step-by-Step Solution
Power = 0.40(0.060)(50)/0.040 = 30.0 W. Energy in 60.0 s = 30.0(60.0) = 1800 J.
Challenge 2: Thicker Insulation
A steady insulation slab has k = 0.120 W/(m K), area 0.250 m², maintained endpoint difference 40.0 K and initial thickness 0.0300 m. It is replaced with the same material and area at thickness 0.0600 m; temperatures are unchanged. Find the initial conduction power, the new power and energy transferred through the new slab in 180 s.
Step-by-Step Solution
Initial power = 0.120(0.250)(40.0)/0.0300 = 40.0 W. New power = 20.0 W because thickness doubles. New-run energy = 20.0(180) = 3600 J. These are maintained steady temperatures, not a transient cooling calculation.
Challenge 3: Audit a Flask Report
A solid support between flask walls has k = 0.50 W/(m K), area 0.020 m² and length 0.100 m. Its ends remain at 100°C and 20°C for 120 s, with steady conduction. A report adds 273.15 to the Celsius temperature difference, claims a vacuum also stops radiation, and says warm fluid rises because “heat itself always rises.” Find the actual temperature difference in K, support conduction power and transferred energy. Explain all three errors.
Step-by-Step Solution
The temperature difference is 100 − 20 = 80°C change = 80 K change; no offset is added. Power = 0.50(0.020)(80)/0.100 = 8.00 W. Energy = 8.00(120) = 960 J.
Radiation can cross a vacuum because electromagnetic waves need no material medium. Conduction through the solid support persists. Natural convection concerns warmer fluid often becoming less dense and rising in a gravitational field; heat itself has no universal upward direction. A fan or pump can drive forced convection in other directions.
☷ CHALLENGE — Sort the Transfer Mechanisms
DOK 2 — ApplySort the Transfer Mechanisms
Choose the mechanism highlighted by each statement.
0 / 6 correct
Physics Insight
Classify the stated mechanism rather than assuming an entire object has only one path.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain conduction, convection and radiation using the spoon, moving air and sunlight examples. Explain why a vacuum flask needs reflective walls and an insulated lid, and why “heat rises” is not a general physical rule.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 8.3 — Heat Transfer Methods
Follow conduction, moving fluid and radiation through three live scenes.
1. Conduction
Energy passes through microscopic interactions in matter, without bulk transport of that material. Vibrations and interactions contribute in solids; mobile electrons also aid conduction in metals. A spoon handle can conduct energy without its atoms migrating down the handle. Identical soup temperatures do not imply identical handle temperatures after a short time.
Steady uniform slab: P = kA(Th − Tc)/L; Q = Pt
Use a temperature difference in K or °C, with no 273.15 offset. Assume fixed endpoint temperatures, constant k, one-dimensional steady flow and negligible side losses. k has units W/(m K); k is not heat capacity. At fixed other quantities, power doubles with area or difference and halves when thickness doubles.
2. Convection
Fluid bulk motion carries energy. Natural convection often occurs when heating expands a fluid and reduces density in gravity, producing buoyant flow. Density behavior, geometry and gravity matter; “hot always rises” is not universal. Forced convection uses fans or pumps. Convection does not occur across a truly evacuated gap.
The optional maintained exchange model P = hAΔT uses a supplied coefficient h; determining h requires the actual flow and geometry. It does not predict a circulation velocity or buoyant acceleration. Conduction within fluid boundary layers can also participate.
3. Thermal radiation
Electromagnetic radiation requires no material medium. Objects at nonzero Kelvin temperatures emit and absorb a spectrum of thermal radiation; at ordinary temperatures much of it is infrared, while the Sun also emits strongly at visible wavelengths.
Optional grey-surface enclosure model: Pnet = εσA(Th⁴ − Tc⁴)
Use Kelvin readings in fourth powers and σ = 5.670374419 × 10⁻⁸ W/(m² K⁴). This model assumes a grey surface facing a large surrounding enclosure with the stated cold radiation temperature and unit enclosure view factor. Both emission and absorption contribute; their difference gives net transfer. Surface emissivity depends on wavelength and material; visible color alone does not guarantee its infrared behavior.
4. A real vacuum flask
An evacuated gap suppresses conduction and convection through gas, but radiation can cross it. Reflective low-emissivity surfaces reduce radiative exchange. Neck supports still conduct, residual gas can contribute, and the lid limits air exchange and evaporation as well as transfer through the neck. A flask reduces losses; it does not defeat all transfer forever.
A metal surface may feel colder than wood at the same temperature because it draws energy from warmer skin more rapidly. This is a transient contact response, influenced by thermal properties and contact conditions.
5. Independent worked cases
The maintained slab transfers 30.0 W and 1800 J in 60.0 s. Doubling insulation thickness in the second case reduces power from 40.0 to 20.0 W, giving 3600 J in 180 s. The support audit has an 80 K temperature difference, 8.00 W and 960 J.
Do not add a zero-point offset to a temperature difference. Do not claim vacuum stops radiation or solid-bridge conduction. Describe rising fluid through buoyancy and density, not heat as an upward-moving substance.
6. Three live, separate experiments
Fixed reservoir temperatures sustain all three rates. The conduction slab uses k = 0.20 W/(m K), A = 0.050 m² and adjustable L. The separate convection exchange uses h = 5.0 W/(m² K) and the same area. Its prescribed loop length is 0.80 m and its speed 0.020 m/s, with markers completing a loop in 40 s; this is a bulk-motion illustration, not a solved natural-convection flow.
The separate radiation surface has emissivity 0.80, area 0.050 m² and a large enclosure at 20°C. Conduction and radiation indicators advance a phase cycle per 100 J transferred. They show accumulated net transfer, not particle or photon speeds. The slab’s displayed thickness varies with selected L; the other two experiments are unchanged when only L changes.
Twenty physical seconds play over eight real seconds. Complete matched runs changing hot temperature, then slab thickness. Pause, Step and Reset use the same clock. Loading a setup earns no measurement credit.
7. Course scope
AP Physics 2 topic 9.3 explicitly covers conduction, convection and radiation; topic 9.5 covers the steady slab conduction equation. The convection coefficient and grey-surface radiation equation here are clearly marked enrichment. For Cambridge A Level 9702, transfer methods support thermal-equilibrium topic 14.1 and prior thermal understanding; these rate laws are not separate named requirements in the checked syllabus.
✓ Crest’s Checklist
- I identify microscopic, bulk-fluid and electromagnetic transfer.
- I allow multiple mechanisms to occur together.
- I use temperature differences without offsets in conduction.
- I separate rate in watts from energy in joules.
- I state steady-slab and radiation-model assumptions.
- I identify residual paths in a practical vacuum flask.
- I describe buoyancy without saying heat universally rises.
— Crest ☆ “Follow conduction, moving fluid and radiation through three live scenes.”
Mission 8.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Heat Transfer Methods Master
Identify the actual transport mechanism and its conditions; more than one can operate at the same time.