WONDER — The Mystery
Energy Added, Temperature Unchanged
A pure ice/water mixture at its melting temperature can absorb energy without warming while ice remains. The energy changes the phase. How much ice can actually melt depends on its mass, the energy supplied and the specific latent heat; a fixed 5000 J cannot melt an unspecified amount of ice.
Model: Use an ideal equilibrium heating curve for a pure sample at fixed 1 atm pressure. Melting occurs at 0°C and boiling at 100°C in this rounded water model. Use constant supplied specific heats and latent heats, no environmental or container losses, and net absorbed power held constant. Q = mcΔT covers single-phase temperature changes; Q = mL covers the mass changing phase. At constant pressure, heat during vaporization includes molecular-interaction changes and expansion work; it is not all an internal-energy increase.
PREDICT — Commit to Your Answer
DOK 2 — PredictPure water and its vapor coexist at the boiling point under maintained 1 atm pressure. Net absorbed heater power doubles while liquid remains. What happens in the ideal model?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
At fixed pressure during coexistence, temperature remains at the boiling point. The ideal rate is dm/dt = Pnet/Lv, so twice net absorbed power gives twice vaporization rate. Once all liquid is gone, vapor can warm.
▶ PLAY — Live Ice-to-Steam Phase Lab
DOK 2 — InvestigatePredict, measure and compare
Watch the ice mass shrink, liquid fraction grow, bubbles rise during boiling and vapor markers move. Complete two runs differing only in sample mass, then a third differing only in absorbed power. Inspect each phase midpoint for a deliberate snapshot; inspection alone earns no trial credit.
A closed pure-water sample at maintained 1 atm expands as necessary; the schematic phase chamber is not a fixed-volume vessel. It begins as ice at −20°C and ends as vapor at 120°C. Model values: cice = 2100, cwater = 4200, cvapor = 2000 J/(kg K), Lf = 334000 and Lv = 2260000 J/kg. Net absorbed heat is Q = Pt. The five per-kilogram stage energies are [42000, 334000, 420000, 2260000, 40000] J/kg; total absorbed heat is 3096000m J. The time to finish is total energy/P. Ice-block area, liquid height and vapor-marker visibility schematically track mass fractions, not actual phase volumes. Bubble and molecule paths illustrate the phase and are not a resolved molecular dynamics model. Each full physical heating process plays over 8 real seconds; use phase-inspection buttons to examine its brief early stages.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Temperature vs Physical Time
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
Inspect a phase midpoint
Snapshots use actual physical times. They do not count as completed runs.
♢ DISCOVER — Phase Energy, Temperature and Time
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Specific latent heat
Click to flip
Specific latent heat
L is energy per kilogram needed for a specified phase change at stated pressure and transition temperature. Q = mchanged L; fusion means solid ↔ liquid, vaporization means liquid ↔ gas. Reverse transitions release the corresponding heat.
Rule 2
Single-phase versus transition
Click to flip
Single-phase versus transition
For the supplied constant-property model, temperature changes use Q = mcΔT. During a pure equilibrium two-phase transition at fixed pressure, supplied heat changes phase fraction while temperature remains constant.
Rule 3
Add the stages
Click to flip
Add the stages
Heating cold ice into warm water or steam requires summing distinct sensible and latent contributions. A zero ΔT across a plateau does not make its energy zero. The five-stage curve is an idealized specific path, not every heating process.
Rule 4
Power determines time
Click to flip
Power determines time
With constant net absorbed power, t = Q/Pnet. During a transition, the ideal mass conversion rate is Pnet/L. Heater electrical power must be corrected for losses or efficiency before it is used as absorbed power.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Zero temperature change during melting means no energy is absorbed.”
Correct — the claim is false.
False. A changing mass melts by absorbing Q = mchanged Lf while temperature stays at the transition point under the stated fixed-pressure conditions.
Myth 2: “Boiling breaks each water molecule into hydrogen and oxygen.”
Correct — the claim is false.
False. Boiling changes intermolecular arrangement and separation; molecules remain H₂O. At fixed pressure the supplied heat also provides expansion work. A phase change is not that chemical decomposition.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Choose and Combine the Energy Terms
DOK 2 — ApplyIdentify the initial and final phase before calculating energy or time.
Instructor Q1 — At a Plateau
A pure ice/water mixture at fixed pressure absorbs energy while ice remains. What can change without a temperature rise?
Instructor Q2 — After Boiling Finishes
All liquid has become vapor at fixed pressure. Further heat is absorbed. What does the model allow?
Instructor Q3 — Melt a Fresh Mass
Melt 0.300 kg ice at 0°C into water at 0°C at 1 atm. Use Lf = 334000 J/kg. Find absorbed heat.
Instructor Q4 — Warm Then Melt
Heat 0.200 kg ice at −15°C into water at 0°C at 1 atm. Use cice = 2100 J/(kg K) and Lf = 334000 J/kg. Find total heat.
4/4 — Instructor Questions Completed
A flat temperature interval can still require substantial energy and time; track phase fraction as well as temperature.
✎ PRACTICE — Independent Phase-Change Cases
DOK 1–3 — PracticeChallenge 1: Melting at Fixed Temperature
Completely melt 0.0750 kg ice at 0°C into water at 0°C at 1 atm. Use Lf = 334000 J/kg. Find the heat absorbed and the temperature change in K.
Step-by-Step Solution
Q = 0.0750(334000) = 25050 J. Temperature change is 0 K. The energy changes phase rather than raising the transition temperature.
Challenge 2: Cold Ice to Warm Water
0.150 kg ice starts at −12.0°C and finishes as water at 25.0°C at 1 atm. Use cice = 2100, cwater = 4200 J/(kg K), and Lf = 334000 J/kg. A heater supplies constant net absorbed power 150 W with no other energy losses. Find total heat and heating time.
Step-by-Step Solution
Warm ice: 0.150(2100)(12.0) = 3780 J. Melt: 0.150(334000) = 50100 J. Warm water: 0.150(4200)(25.0) = 15750 J. Total = 69630 J. Time = 69630/150 = 464.2 s.
Challenge 3: Audit a Steam-Energy Report
At fixed 1 atm, 0.400 kg water at 30.0°C becomes vapor at 100°C. Use cwater = 4200 J/(kg K) and Lv = 2260000 J/kg. An electrical heater is rated 500 W; a constant 80.0% of its energy reaches this sample. A report uses only mcΔT, divides the required sample energy by the full electrical power, and claims vaporization breaks the bonds within H₂O molecules. Find the liquid-warming heat, vaporization heat, total sample heat and heating time. Explain all three errors.
Step-by-Step Solution
Warming heat = 0.400(4200)(100 − 30) = 117600 J. Vaporization heat = 0.400(2260000) = 904000 J. Total sample heat = 1021600 J.
Absorbed power = 0.800(500) = 400 W, so time = 1021600/400 = 2554 s. Ignoring latent heat undercounts energy; using full electrical power undercounts time.
Vaporization changes intermolecular separation and arrangement, with expansion work at fixed pressure; molecules remain H₂O. It does not break their internal chemical bonds to form hydrogen and oxygen.
☷ CHALLENGE — Sort Sensible, Latent and Total Energy
DOK 2 — ApplySort Sensible, Latent and Total Energy
Classify the energy statement under its stated model.
0 / 6 correct
Physics Insight
A plateau changes phase fraction even though its temperature slope is zero.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why a pure boiling sample at fixed pressure can absorb energy without warming while liquid remains. Include phase energy, net heater power, and what happens after all liquid has become vapor. Distinguish intermolecular rearrangement from chemical decomposition.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 8.5 — Latent Heat & the Heating Curve
Watch ice melt and water vaporize while the temperature can stay fixed.
1. Specific latent heat
Specific latent heat L is energy per unit mass for a specified phase change at stated pressure and temperature. It has units J/kg. Fusion is solid ↔ liquid; vaporization is liquid ↔ gas. Melting and vaporization absorb heat, while freezing and condensation release the corresponding amount under comparable conditions.
Qphase = mchanged L; Qtemperature = mcΔT
mchanged is the mass actually changing phase, not automatically the whole initial sample. A finite energy input may only partially melt or vaporize it.
2. Why temperature can stay fixed
A pure sample undergoing an equilibrium two-phase transition at fixed pressure remains at its transition temperature while the phase fractions change. Temperature not rising does not mean no energy enters. Molecular interactions and arrangement change; vaporization at constant pressure also involves expansion work.
Water molecules remain H₂O during melting and boiling. Do not describe the transition as breaking the internal chemical bonds into hydrogen and oxygen. Nor should all the supplied latent heat automatically be called an internal-energy increase: at constant pressure it is an enthalpy change, with ΔU = Q − work done by the sample.
3. The five-stage ideal path
Ice warms → melts at 0°C → liquid warms → vaporizes at 100°C → vapor warms, using rounded properties at 1 atm. Sloping temperature sections use the appropriate phase’s c; plateaus use Lf or Lv. Other pressures change transition temperatures; mixtures, losses and nonequilibrium conditions need a fuller model.
For a temperature-versus-time curve at constant net power, single-phase slope is Pnet/(mc). Plateau duration is mL/Pnet. For a temperature-versus-energy curve, the single-phase slope is 1/(mc); do not confuse these horizontal axes.
4. Power and total time
Qtotal = sum of stage energies; t = Qtotal/Pnet
If only efficiency η of electrical power reaches the sample, Pnet = ηPelectrical. Added electrical energy can also heat the container or be lost to surroundings. During coexistence, ideal phase conversion rate is Pnet/L. Doubling power shortens duration, not the fixed-pressure transition temperature.
5. Worked independent cases
Melting 0.0750 kg at 0°C absorbs 25050 J with zero temperature change. Heating 0.150 kg ice from −12.0°C into water at 25.0°C requires 3780 + 50100 + 15750 = 69630 J; at 150 W net this takes 464.2 s.
The steam report needs 117600 J to warm liquid and 904000 J to vaporize it, totaling 1021600 J. With 80.0% of 500 W absorbed, power is 400 W and time 2554 s. Include phase energy and efficiency, and preserve the molecules’ chemical identity.
6. Live phase fractions and the real clock
The sample begins as ice at −20°C and finishes as vapor at 120°C under maintained 1 atm. Use cice = 2100, cwater = 4200 and cvapor = 2000 J/(kg K), with Lf = 334000 and Lv = 2260000 J/kg. Properties are held constant. Per kilogram, the five stage energies are 42000, 334000, 420000, 2260000 and 40000 J, total 3096000 J/kg.
Heat is Q = Pt. Piecewise energy inversion gives temperature and phase fraction from this same energy, preserving total mass. During melting the ice block shrinks while liquid fraction grows; during boiling the liquid fraction declines and vapor fraction grows. Bubbles and moving vapor markers are schematic, with no predicted microscopic speeds or physical phase-volume scale. The expanding closed constant-pressure system must not be interpreted as a rigid sealed vessel.
The graph uses physical time in minutes and temperature in °C. Future curve is a grey prediction; measured cyan curve and current point follow actual elapsed model time. Every full process plays over eight real seconds. Phase-midpoint inspection provides deliberate snapshots without trial credit. Compare mass, then absorbed power; three matched completed runs unlock the next stage. Reduced-motion Run shows the completed state.
7. Course scope
Cambridge A Level 9702 topic 14.3 explicitly covers specific latent heat of fusion and vaporization together with specific heat capacity. AP Physics 2 topic 9.5 supports specific-heat calculations; this quantitative phase-change and five-stage treatment is enrichment rather than a separately listed requirement in the checked course description.
✓ Crest’s Checklist
- I identify the mass actually changing phase.
- I distinguish sensible and latent energy terms.
- I state fixed-pressure pure-sample assumptions.
- I add every required stage.
- I use net absorbed power for time.
- I distinguish intermolecular changes from chemical decomposition.
- I read the heating curve’s horizontal axis correctly.
— Crest ☆ “Watch ice melt and water vaporize while the temperature can stay fixed.”
Mission 8.5 Complete! · All 10 levels cleared · PHYSICS CREST
★ Latent Heat & the Heating Curve Master
A flat temperature interval can still require substantial energy and time; track phase fraction as well as temperature.