WONDER — The Mystery
Energy Per Charge, With a Sign
Electric potential is energy per unit charge at a point relative to a chosen reference. Potential difference is final potential minus initial potential. A positive and a negative particle at the same point have different signed potential energies in the same source field. Both can lower their potential energy when released, while moving toward different potentials.
Model: For a fixed point source, V = kQ/r with V = 0 at infinity and external-source potential energy U = qV. Define ΔV = Vfinal − Vinitial, ΔU = qΔV and work by the electric field Wfield = −ΔU. Quasistatic external work with no kinetic-energy change is Wext = ΔU. Potential is a scalar; electric field is a vector toward decreasing V.
PREDICT — Commit to Your Answer
DOK 2 — PredictA negative probe is released from rest to the right of a fixed positive point source, with no other force. Which initial response is correct?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The positive source’s field points away from it; a negative probe feels the opposite force, toward the source. V rises as r decreases, but qV decreases because q is negative.
▶ PLAY — Live Potential and Energy Motion
DOK 2 — InvestigatePredict, measure and compare
Complete two runs changing only the source charge, then a third changing only probe charge sign. Watch the released probe move, compare V with U, and follow kinetic energy and field work. The same potential landscape produces opposite force directions for opposite probe signs.
A point source of selected signed charge is held fixed at the origin. A probe of selected signed charge and mass 1.00 × 10⁻⁹ kg begins at rest to its right. Convert nC and cm to SI. Use k = 9.00 × 10⁹ N m²/C², neglect radiation and other forces, and keep the source distribution fixed. A small-step velocity-Verlet calculation advances 0.040 model seconds using F = kQq/r² on the outward-positive radial axis. V = kQ/r uses zero at infinity; U = qV excludes the probe’s self-energy. An ideal catch stops an approaching probe at r = 0.080 m and removes its kinetic energy; catch work is displayed separately. The drawing uses a compressed distance scale; read the numerical separation. Positive and negative probes lower U when freely accelerated, but they need not move toward lower V.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Signed Energy and Work
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Potential and voltage
Click to flip
Potential and voltage
V is potential relative to a reference; a signed potential difference is ΔV = Vfinal − Vinitial. One volt is one joule per coulomb. Voltage describes energy per charge, not charge capacity or total stored energy.
Rule 2
Source potential and energy
Click to flip
Source potential and energy
For a fixed point source with zero at infinity, V = kQ/r and U = qV. Add potentials from sources as signed scalars. A zero potential can coexist with a nonzero field, and conductor equilibrium potential can be nonzero.
Rule 3
Field and external work
Click to flip
Field and external work
ΔU = qΔV, Wfield = −ΔU. If a slow external agent moves the probe with no kinetic-energy change, Wext = ΔU. In free motion, ΔK = Wfield; catching or other external forces require their own work terms.
Rule 4
Charge sign matters
Click to flip
Charge sign matters
E points toward decreasing V, and a positive probe’s force is along E. A negative probe’s force is opposite E, toward increasing V, while its U can decrease. Motion also depends on initial velocity and other forces, so “every charge always moves downhill in V” is false.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A point with zero electric potential must also have zero electric field.”
Correct — the claim is false.
False. Signed scalar potentials can cancel while vector fields remain nonzero.
Myth 2: “Work by the electric field is always +qΔV.”
Correct — the claim is false.
False. ΔU = qΔV, while field work is −qΔV. Quasistatic external work has the +qΔV sign.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Potential, Energy and Work Signs
DOK 2 — ApplyUse ΔV = final minus initial and state whose work is requested.
Instructor Q1 — Negative Source
With V = 0 at infinity, how does potential change when approaching a negative point source?
Instructor Q2 — Battery Comparison
For the same transferred positive charge at constant terminal voltage, which statement follows from 9 V versus 1.5 V?
Instructor Q3 — A Potential Difference
A charge moves from potential −4.0 V to +8.0 V. Find the signed potential difference.
Instructor Q4 — Field Work
A +2.0 μC probe moves from 10 V to 4 V. Find work done by the electric field.
4/4 — Instructor Questions Completed
Potential belongs to the source field; potential energy and work also depend on the probe’s signed charge.
✎ PRACTICE — Independent Signed Energy Audits
DOK 1–3 — PracticeChallenge 1: Potential-Energy Change
A probe of charge +3.00 μC moves from a point at +4.00 V to a point at +11.0 V in a fixed electrostatic field. Determine the signed potential difference and the probe’s potential-energy change.
Step-by-Step Solution
ΔV = 11.0 − 4.00 = +7.00 V. ΔU = (3.00 × 10⁻⁶)(7.00) = +2.10 × 10⁻⁵ J.
Challenge 2: A Negative Source and Probe
A fixed point source has charge −6.00 nC. A probe of charge −2.00 nC moves from radius 0.30 m to 0.60 m. Use k = 9.00 × 10⁹ N m²/C² and V = 0 at infinity. Find the final potential, signed potential difference, probe potential-energy change and electric-field work.
Step-by-Step Solution
Vi = −180 V and Vf = −90 V. ΔV = +90 V. ΔU = (−2.00 × 10⁻⁹)(90) = −1.80 × 10⁻⁷ J. Wfield = +1.80 × 10⁻⁷ J. The negative probe moves toward higher potential while losing potential energy.
Challenge 3: Audit a Potential Report
Fixed sources +3.00 nC and −3.00 nC lie at x = −0.10 m and +0.10 m. Use k = 9.00 × 10⁹ N m²/C², zero potential at infinity and right positive. Find the potential and signed x field at their midpoint. Separately, a −2.00 nC probe is moved quasistatically from a point at +120 V to one at +40 V, with no kinetic-energy change. Find its potential-energy change, work by the field and work by the external mover. A report says zero potential implies zero field, every released charge moves toward lower potential, and +qΔV is the field’s work. Explain all three errors.
Step-by-Step Solution
The source potentials at the midpoint cancel: +270 V − 270 V = 0 V. The fields both point right and add: +2700 + 2700 = +5400 N/C.
For the separate move, ΔV = 40 − 120 = −80 V. ΔU = (−2.00 × 10⁻⁹)(−80) = +1.60 × 10⁻⁷ J. Wfield = −1.60 × 10⁻⁷ J; Wext = +1.60 × 10⁻⁷ J because ΔK = 0.
Zero scalar potential does not imply zero vector field. A released negative charge feels force toward higher V and can lower U that way; initial motion and other forces still matter. +qΔV is the energy change and quasistatic external work, whereas field work has the opposite sign.
☷ CHALLENGE — Sort the Probe Energy Change
DOK 2 — ApplySort the Probe Energy Change
Only the stated signed charge and potential change matter.
0 / 6 correct
Physics Insight
Potential change alone cannot specify an energy change without the probe charge.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain voltage and potential energy using signed charge. Include a reference, final-minus-initial potential difference, scalar potential versus vector field, field versus external work, and why a negative released probe can lower energy while moving toward higher potential.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 9.10 — Electric Potential & Voltage
Track signed potential differences, energy changes and work for either charge sign.
1. Potential and reference
Electric potential is potential energy per unit charge relative to a consistent chosen reference. Potential difference is the signed ΔV = Vfinal − Vinitial. One volt is one joule per coulomb. “Higher minus lower” gives a positive magnitude in a particular comparison, not the general signed change for an arbitrary move.
V = kQ/r; U = qV
For a fixed point source use V = 0 at infinity and rounded k = 9.00 × 10⁹ N m²/C². U is interaction energy of the probe with the external source, excluding its self-energy. Changing the reference shifts V and U consistently but does not change ΔV, field or work. Potential is a scalar: add kQi/ri with signs for several sources.
2. Field versus potential
The electric field is directed toward decreasing potential: in one dimension Ex = −dV/dx. Equal opposite source potentials may cancel at a point while their fields add. A conductor at electrostatic equilibrium has a constant potential, which need not be zero, because E = 0 inside its conducting material. Potential value and field magnitude are different information.
3. Signed energy and two work agents
ΔU = qΔV; Wfield = −ΔU; ΔK = Wfield + Wext
If an external agent moves the charge quasistatically with no kinetic-energy change, Wext = ΔU. In free motion without other work, ΔK = −ΔU. Use the signed q. Positive probes tend to accelerate toward lower V, negative probes toward higher V; both can lower U. Initial velocity and other forces determine the full motion, so a particle does not automatically follow a field line or always move in its force direction.
4. Voltage is not capacity
A constant 9 V source transfers 9 J per coulomb through its potential difference; a 1.5 V source transfers 1.5 J per coulomb. The same transferred charge therefore corresponds to six times the energy, not necessarily six times the stored charge or current. Total energy transferred under constant voltage is QΔV in the specified transfer convention. If voltage varies, the product of one nominal voltage with total charge need not give the exact energy. At a stated steady current, power P = IΔV.
A water-height analogy can help a positive-charge energy picture, but drops are not literally coulombs and a number of drops is not a flow rate unless a time is specified. A negative probe reverses the energy-versus-potential relation. Chemical cells and generators can supply electrical energy; a battery is not the only place charge can gain it.
5. Live released-probe model
A fixed source at the origin acts on a point probe initially at rest on its right. Probe mass is 1.00 × 10⁻⁹ kg. Charges in nC and distance in cm are converted before a small-step velocity-Verlet calculation advances 0.040 model seconds. Use outward as positive for radius velocity and force. The source’s position and charge are held fixed, so its support does no work; radiation and other forces are neglected.
V = kQ/r and U = qV are tracked with K = ½mv². Free motion lowers U and raises K to numerical accuracy. At r = 0.080 m an ideal catch removes the approaching probe’s kinetic energy. Its negative external work is included in the energy balance; the displayed field work is still −ΔU. After capture the catch holds the probe. The compressed drawing scale is schematic; read the numerical radius. A zero source or zero probe produces no force.
0.040 model seconds play over eight real seconds. Compare source charge, then probe sign with other inputs fixed. Positive and negative probes can move in opposite radial directions on the same source-potential landscape.
6. Worked practice
+3.00 μC moving from 4.00 to 11.0 V gives ΔV = +7.00 V and ΔU = +21.0 μJ. For a −6.00 nC source, radii 0.30 and 0.60 m give −180 and −90 V. A −2.00 nC probe then has ΔU = −1.80 × 10⁻⁷ J and field work +1.80 × 10⁻⁷ J.
At the midpoint of the report’s equal opposite sources, V = 0 but Ex = +5400 N/C. The separate negative-probe move has ΔV = −80 V, ΔU = +1.60 × 10⁻⁷ J, Wfield = −1.60 × 10⁻⁷ J and Wext = +1.60 × 10⁻⁷ J.
7. Scope
AP Physics 2 topics 10.4–10.5 cover interaction energy, scalar potential and their relationship. Cambridge AS 9702 topic 9.2 introduces energy per charge; A Level topic 18.5 includes point-charge potential, the field–potential gradient and interaction energy. The quantitative source tasks use at most two sources.
✓ Crest’s Checklist
- I use a consistent potential reference.
- I calculate final minus initial potential.
- I multiply by the signed probe charge.
- I distinguish field work from external work.
- I distinguish scalar potential from vector field.
- I account for kinetic energy and catch work.
— Crest ☆ “Track signed potential differences, energy changes and work for either charge sign.”
Mission 9.10 Complete! · All 10 levels cleared · PHYSICS CREST
★ Electric Potential & Voltage Master
Potential belongs to the source field; potential energy and work also depend on the probe’s signed charge.