WONDER — The Mystery
Mobile Charge, Different Distribution
Deposit charge on one patch of an insulated metal sphere. Mobile electrons redistribute until electrostatic equilibrium is reached. On a dry insulating sphere, deposited charge can remain localized over the observation time. Neither process is instantaneous, and neither changes the isolated sphere’s total charge.
Model: An isolated conducting sphere with no external field has uniform excess surface charge at electrostatic equilibrium, and zero electric field inside its conducting material. General conductors need not have uniform surface density. Insulators restrict long-range charge motion but can still charge and polarize.
PREDICT — Commit to Your Answer
DOK 2 — PredictExtra electrons are deposited on one patch of an isolated spherical metal conductor, with no external electric field or internal cavity charge. What is the equilibrium distribution?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Excess charge lies on the outer surface at equilibrium. Uniformity follows from this isolated sphere’s symmetry, not simply from the material being a conductor.
▶ PLAY — Live Surface Redistribution
DOK 2 — InvestigatePredict, measure and compare
Complete two runs changing only the material model, then a third changing only the deposited charge. Watch charge-group markers move on the metal sphere and compare with the insulating sphere. The signed total stays fixed; the displayed density is a surface average.
Both spheres are isolated and initially receive negative charge on an outer-surface patch. Twelve markers represent equal groups of excess charge, not twelve individual electrons or literal paths. The metal model smoothly interpolates their positions to a uniform schematic ring over 4 model seconds; the dry-insulator model holds them near the deposited patch. This is a qualitative redistribution model, not a solved transient electric field or microscopic trajectory. The sphere’s average surface density is Q/(4πR²); it equals local density only for the symmetric conductor at equilibrium. Radius controls physical surface area; the drawing remains schematic. No leakage or external field is included.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Distribution Depends on Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Conductor equilibrium
Click to flip
Conductor equilibrium
Mobile carriers redistribute until the conducting material has E = 0. An isolated solid conductor carries its excess net charge on its outer surface at electrostatic equilibrium.
Rule 2
Uniform only with symmetry
Click to flip
Uniform only with symmetry
An isolated spherical conductor with no external field has uniform surface charge density. External charges or nonspherical shape can produce nonuniform density. Sharp regions often have stronger surface fields.
Rule 3
Insulators and carriers
Click to flip
Insulators and carriers
Dry insulators restrict long-range charge transport but can acquire localized charge and polarize. Metals conduct mainly through electrons; electrolytes such as saltwater conduct through positive and negative ions.
Rule 4
Humidity and leakage
Click to flip
Humidity and leakage
Higher humidity often makes surface leakage easier through adsorbed moisture and contamination. Water vapor does not simply turn air into a good conductor. Ideal insulation is a model; real materials can slowly leak charge.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every conductor spreads charge uniformly over every surface.”
Correct — the claim is false.
False. Shape, nearby fields, cavities and equilibrium conditions matter. Uniformity follows for an isolated sphere without external fields.
Myth 2: “Saltwater conducts because free electrons drift through the liquid just as in copper.”
Correct — the claim is false.
False. In saltwater, mobile ions carry current. Copper conducts mainly through mobile electrons.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Carriers, Equilibrium and Surface Area
DOK 2 — ApplyDistinguish charge location from uniformity, and track the correct mobile carriers.
Instructor Q1 — Liquid Carrier
What carries electric current through saltwater?
Instructor Q2 — General Conductor
Which statement is correct at electrostatic equilibrium?
Instructor Q3 — Electron Excess
An isolated sphere has net charge −3.20 nC. Use e = 1.60 × 10⁻¹⁹ C. Find its equivalent excess-electron count.
Instructor Q4 — Surface Area
An isolated sphere has radius 0.040 m. Find its surface area.
4/4 — Instructor Questions Completed
Surface location and uniformity are separate claims: uniformity needs the stated spherical symmetry and surroundings.
✎ PRACTICE — Charge Distribution Calculations
DOK 1–3 — PracticeChallenge 1: Electron Inventory
An isolated metal sphere has net charge −4.80 nC. Use e = 1.60 × 10⁻¹⁹ C. Determine the equivalent number of excess electrons.
Step-by-Step Solution
|Q|/e = 4.80 × 10⁻⁹/(1.60 × 10⁻¹⁹) = 3.00 × 10¹⁰ excess electrons.
Challenge 2: Symmetric Surface Density
An isolated spherical conductor has radius 0.050 m and net charge −6.00 nC. It is at electrostatic equilibrium, with no external field or cavity charge. Find the surface area and signed surface charge density.
Step-by-Step Solution
A = 4πR² = 0.031416 m². Spherical symmetry gives uniform σ = Q/A = −1.91 × 10⁻⁷ C/m².
Challenge 3: Audit the Material Report
An isolated solid metal sphere has net charge +8.00 nC at electrostatic equilibrium, with no external field. Use e = 1.60 × 10⁻¹⁹ C. A report says its positive nuclei migrated to its surface, every conductor must have uniform surface density regardless of shape, and saltwater conducts through the same free-electron transport as copper. Find the equivalent electron deficit and the net excess charge in the sphere’s bulk conducting material. Explain all three errors.
Step-by-Step Solution
The deficit is 8.00 × 10⁻⁹/(1.60 × 10⁻¹⁹) = 5.00 × 10¹⁰ electrons. Bulk net excess charge is 0 C; excess charge is on the outer surface.
Positive charging of this metal means missing electrons, not migrating positive nuclei. Uniformity requires the stated spherical symmetry and lack of external fields; arbitrary conductors can have nonuniform density. Saltwater transports charge through ions, whereas copper mainly uses electrons.
☷ CHALLENGE — Classify the Charge Carrier
DOK 2 — ApplyClassify the Charge Carrier
Use the stated material and process.
0 / 6 correct
Physics Insight
Carrier mobility and the observation conditions determine how charge can redistribute.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain how charge redistributes on an isolated spherical conductor and why insulators differ. State the conditions for a uniform surface, distinguish electrons in metals from ions in saltwater, and explain why humidity often increases surface leakage.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 9.3 — Conductors, Insulators & Charge Distribution
Watch charge redistribute and state the conditions for a uniform surface.
1. Conductors and carriers
Metals have mobile electrons that respond to an internal electric field. In ordinary electrostatic charging of a solid metal, its nuclei remain in the material; a positive charge imbalance is an electron deficit. This does not mean protons, nuclei or ions cannot ever move. Saltwater and the body’s electrolytes transport charge through mobile ions.
2. Electrostatic equilibrium
The electric field inside the conducting material is zero at equilibrium. For an isolated solid conductor with no cavity charge, excess net charge is on the outer surface. This does not mean that every electron in the object moves onto the surface; it refers to the net excess charge. A charged cavity can induce inner-surface charge, so the outer-surface-only statement requires its stated conditions.
3. Uniformity and shape
An isolated spherical conductor without an external field has a uniform excess surface density by symmetry. General conductors, nearby sources and sharp regions break that uniformity. Curvature can increase local surface density and electric field. A strong field can ionize air, but lightning protection also requires a properly designed conducting path to Earth; sharpness alone is not protection.
Sphere area A = 4πR²; average σ = Q/A
The average equals the local density only when the density is uniform. Inside conducting material E = 0 at equilibrium; its potential is constant but need not be zero.
4. Insulators and moisture
Insulators lack the same easy long-range carrier motion, so deposited charge can remain localized for the observation time. They can acquire charge and polarize: bound charges may shift slightly. No real material is a perfect insulator. Adsorbed moisture and surface contamination often provide leakage paths when humidity increases. Ordinary water vapor does not simply make air a good conductor, and humid conditions do not guarantee absence of static shocks.
5. Live surface model
Negative charge is deposited on an isolated sphere’s outer-surface patch. Twelve charge-group markers represent the chosen macroscopic total, not twelve electrons. Over four model seconds, the metal markers interpolate to a symmetric ring; dry-insulator markers remain localized. This illustrates endpoints and carrier mobility, not a numerical solution of transient fields or microscopic paths. All total charge remains on the object; no leakage is included.
Average density Q/(4πR²) is valid throughout as an average, but only the symmetric conductor’s final state permits interpreting it as a local density. Four model seconds play over eight real seconds. Compare material with charge and radius fixed, then deposited charge with material and radius fixed.
6. Worked practice
−4.80 nC corresponds to 3.00 × 10¹⁰ excess electrons. At R = 0.050 m, A = 0.031416 m² and −6.00 nC gives σ = −1.91 × 10⁻⁷ C/m². +8.00 nC corresponds to 5.00 × 10¹⁰ missing electrons. The equilibrium bulk conducting material has no net excess charge under the stated conditions.
7. Scope
AP Physics 2 topics 10.1 and 10.3 include mobile carriers, conductors, insulators and equilibrium fields. This material supports Cambridge A Level electric fields in Topic 18; the carrier and humidity explanations are supporting foundations.
✓ Crest’s Checklist
- I distinguish metal electrons from liquid ions.
- I apply E = 0 only at conductor equilibrium.
- I state the conditions for outer-surface excess charge.
- I state the symmetry needed for uniform density.
- I distinguish average and local density.
- I explain surface moisture leakage without overclaiming.
— Crest ☆ “Watch charge redistribute and state the conditions for a uniform surface.”
Mission 9.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Conductors, Insulators & Charge Distribution Master
Surface location and uniformity are separate claims: uniformity needs the stated spherical symmetry and surroundings.