WONDER — The Mystery
A Field Exists Before a Test Charge
An electric field describes the force per unit positive test charge at each location. Field lines are drawn representations: their tangent gives local field direction. They are not physical threads or guaranteed particle paths. Two fields at the same point add as vectors and can cancel exactly.
Model: Use E = F/qtest for a sufficiently small test charge that does not disturb the source distribution; vector F = qtest E. A positive test charge feels force along E and a negative one opposite E. For a point source, E = kQ/r² radially, with direction set by Q. Superpose the vector fields from all sources.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo equal positive point charges are fixed symmetrically on either side of their exact midpoint. What is the electric field at that midpoint?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Each positive source points its field away from itself. At the midpoint the two equal fields point oppositely and sum to zero; the field direction there is undefined.
▶ PLAY — Live Probe Across a Field Map
DOK 2 — InvestigatePredict, measure and compare
Complete two runs changing only A’s source charge, then a third changing only probe height. Watch an externally positioned small test probe sweep across the map; compare field components and the force directions on positive and negative test charges.
Sources A and B are fixed at x = −0.15 m and +0.15 m on y = 0. Their selected charges are in nC. A prescribed external probe scans x = −0.35 m to +0.35 m at the selected positive height over 4 model seconds. Compute the vector field by superposition with k = 9.00 × 10⁹ N m²/C². Forces use test charges ±1 nC treated as negligible enough not to disturb the sources. The probe is positioned by an actuator; its horizontal path is not a field line or free trajectory. Curves are sparse numerically integrated field-line samples, with arrows along the local E; their chosen count is illustrative rather than calibrated charge or density. Grid arrows also show local direction. The map excludes point-source singularities.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — A Map of a Vector Field
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Tangent gives local E
Click to flip
Tangent gives local E
Field-line arrows point away from positive sources and toward negative sources, or connect to infinity. The local tangent gives the force direction for a small positive test charge. A particle with inertia need not follow a line.
Rule 2
Density needs a convention
Click to flip
Density needs a convention
A consistent field-line drawing can represent stronger field by greater local line density. Arbitrarily adding more drawn lines does not change the physical field. Lines do not cross where E has a unique nonzero direction; at E = 0 the direction is undefined.
Rule 3
Vector superposition
Click to flip
Vector superposition
Add field components with their signs. Equal positive sources cancel at their midpoint; equal opposite sources add in the same direction there. Force on a negative test charge points opposite the resultant E.
Rule 4
Conductor conditions
Click to flip
Conductor conditions
At electrostatic equilibrium, E = 0 inside conducting material and the external surface field is normal. A closed empty cavity with no interior charges is shielded in the ideal electrostatic model. A cavity containing charge need not have E = 0.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A field line is the path every positive particle must follow.”
Correct — the claim is false.
False. A line gives local field direction; initial velocity and inertia generally produce a different trajectory.
Myth 2: “The electric field in every cavity of a conductor is always zero, even when charges are inside it.”
Correct — the claim is false.
False. Conducting material has E = 0 at equilibrium, but charges in a cavity can create a field within that cavity.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Direction, Superposition and Test Charge
DOK 2 — ApplyUse k = 9.00 × 10⁹ N m²/C². Right is positive for one-dimensional questions.
Instructor Q1 — Negative Test Charge
A negative test charge is placed in a rightward electric field. Which way is its electric force?
Instructor Q2 — Cavity Condition
Which statement is correct in the ideal electrostatic model?
Instructor Q3 — Point-Source Field
A +2.00 nC source is 0.20 m from a point to its right. Find the signed x component of its electric field.
Instructor Q4 — Negative Probe Force
A probe of charge −2.00 nC is in a field +600 N/C on the x axis. Find its signed x force.
4/4 — Instructor Questions Completed
Field direction describes the local force on a positive test charge, while superposition and charge sign determine the actual force.
✎ PRACTICE — Independent Field and Force Problems
DOK 1–3 — PracticeChallenge 1: Single Source
A point lies 0.30 m to the right of a +3.00 nC point source in vacuum. Use k = 9.00 × 10⁹ N m²/C² and right positive. Determine the signed x component of electric field at the point.
Step-by-Step Solution
E = kQ/r² = 9.00 × 10⁹(3.00 × 10⁻⁹)/(0.30)² = +300 N/C, to the right.
Challenge 2: Two Midpoint Configurations
A is at x = −0.10 m and B at x = +0.10 m. Initially both are +2.00 nC. Find the signed midpoint field. Then B is changed to −2.00 nC while A stays fixed. Find the new signed midpoint field and the signed force there on a −3.00 nC test charge. Use k = 9.00 × 10⁹ N m²/C² and right positive.
Step-by-Step Solution
Each contribution has magnitude 1800 N/C. For two positives the directions oppose, giving 0 N/C. With B negative, both fields point right, giving +3600 N/C. F = (−3.00 × 10⁻⁹)(3600) = −1.08 × 10⁻⁵ N.
Challenge 3: Audit a Field-Line Report
A +4.00 nC source is at x = −0.20 m and B +1.00 nC at x = +0.20 m. A −2.00 nC test charge is placed at the midpoint. Use k = 9.00 × 10⁹ N m²/C² and right positive. A report adds source-field magnitudes without directions, places the negative test charge’s force along the resultant field, and says a drawn field line is necessarily the particle’s complete trajectory regardless of initial velocity. Find the signed midpoint field and the signed force on the test charge. Explain all three errors.
Step-by-Step Solution
EA = +900 N/C and EB = −225 N/C. The resultant is +675 N/C. F = (−2.00 × 10⁻⁹)(675) = −1.35 × 10⁻⁶ N.
Fields add as vectors, so these contributions oppose. A negative test charge feels force opposite E. Field lines give the local positive-test-force direction; a particle’s trajectory also depends on initial velocity and inertia and need not coincide with a field line.
☷ CHALLENGE — Classify the Exact Field Statement
DOK 2 — ApplyClassify the Exact Field Statement
Use the stated ideal electrostatic conditions.
0 / 6 correct
Physics Insight
Field direction is defined by a positive test charge, independent of the sign of the actual probe.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain electric field lines as a local vector map, not physical threads or guaranteed paths. Include a small positive test charge, opposite force for a negative probe, signed superposition, density conventions and the conditions for E = 0 in conductors or empty cavities.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 9.9 — Electric Fields & Field Lines
Read local field direction, add vectors and distinguish maps from trajectories.
1. Electric field and force
Vector E = vector F/qtest; vector F = qtest vector E
The test charge must be small enough not to change the source distribution significantly. Field units are N/C or equivalently V/m. A positive probe feels force along E, a negative probe opposite E. The field exists as a property of the source configuration, without needing a test charge to create it.
2. Point-source superposition
For a point source, magnitude E = k|Q|/r². Direction is away from a positive Q and toward a negative Q. Add source contributions as vectors or signed components, using k = 9.00 × 10⁹ N m²/C² in this lesson. Two equal positive sources cancel exactly at their midpoint. Two equal opposite sources produce fields in the same direction there.
3. What field lines mean
A line’s tangent gives the local field direction; arrows show the positive-test-force direction. Lines start on positive charge or infinity and end on negative charge or infinity. They cannot cross at a point with a unique nonzero field direction. At a field-null point E = 0, direction is undefined; do not draw a crossing with two claimed directions there.
With a consistent line-per-charge convention, greater local density can represent greater field magnitude. Line count is a drawing choice, not an independent physical measurement; more ink does not strengthen a field. Field lines are not moving electrons, light rays or guaranteed charged-particle trajectories. Velocity and inertia can carry a particle across them.
4. Conducting material and cavities
At electrostatic equilibrium, E = 0 inside conducting material. Otherwise mobile charge would keep moving. The nonzero external field immediately outside the surface is normal to it. Excess surface charge need not be uniform; shape and external fields matter. Strong local fields can occur near sharply curved regions under the relevant conditions.
A closed empty cavity inside an ideal conductor is shielded from static external fields when it contains no internal charge. Put charge inside the cavity and its field there can be nonzero, with induced inner-surface charge. “Inside conducting material” and “inside a cavity” are different regions. A static ideal field result is not a quantitative model of a lightning strike or a guarantee about a particular vehicle.
5. Live field-map scan
The fixed sources are at (−0.15 m, 0) and (+0.15 m, 0). The actuator scans a probe from x = −0.35 m to +0.35 m at y = 0.10–0.20 m. Compute both field components from the two sources and test forces for ±1 nC, treating their effect on the sources as negligible. The source singularities are excluded from the map.
Curves are sparse numerical field-line samples and arrows point along the computed local field. Their count is illustrative and not calibrated as charge or field density. Grid arrows show direction. The horizontal probe path is externally controlled and is not a field line or free trajectory. Four model seconds play over eight real seconds. Compare source A charge, then probe height, with the other controls fixed.
6. Worked practice
+3.00 nC at 0.30 m gives +300 N/C to its right. Equal +2.00 nC sources at ±0.10 m give midpoint E = 0; changing B to −2.00 nC gives +3600 N/C and force −1.08 × 10⁻⁵ N on a −3.00 nC probe. In the report, fields +900 and −225 N/C sum to +675 N/C, giving −1.35 × 10⁻⁶ N on the negative probe.
7. Scope
AP Physics 2 topic 10.3 and Cambridge A Level 9702 topics 18.1 and 18.4 cover field definition, maps and point-source fields. All numerical superposition here uses two sources, within AP’s stated source-count scope.
✓ Crest’s Checklist
- I use a sufficiently small test charge.
- I read the local field-line tangent.
- I reverse force for a negative probe.
- I add field components as vectors.
- I distinguish field lines from trajectories.
- I state conductor and cavity conditions.
— Crest ☆ “Read local field direction, add vectors and distinguish maps from trajectories.”
Mission 9.9 Complete! · All 10 levels cleared · PHYSICS CREST
★ Electric Fields & Field Lines Master
Field direction describes the local force on a positive test charge, while superposition and charge sign determine the actual force.