Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 10.1 · Circuits, EMF & Energy Sources Track conserved charge and energy transferred per coulomb.
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

Why Can the Source and Load Both Warm?

A source transfers chemical energy to an electrical circuit. A load transfers energy to other forms, while a source with internal resistance also heats. Charge is conserved; a depleted battery has less available chemical energy, not an exhausted stock of circulating charge.

Source and loadOne closed DC loopSource + resistive loadSteady current+−
Given conditions only; arrows and distances are schematic.

Model: Use a steady DC source of e.m.f. ε with internal resistance r and one load of resistance R. Wires have negligible resistance. Conventional current has the direction of positive-charge flow; electrons in metal drift oppositely. The charge-carrier analogy does not model electromagnetic energy propagation or battery chemistry.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

A source transfers 36 J of chemical energy while 3 C of charge passes. Which statement describes its e.m.f.?

Source givensEnergy supplied: 36 JCharge passed: 3 C+−
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Circuit Energy Ledger

DOK 2 — Investigate

Predict, measure and compare

Compare two e.m.f.s with the same resistances, then change only the load resistance. Complete three runs. Watch conventional-current markers move and all energy totals grow. Inspect internal heating by varying r.

The source supplies a constant e.m.f. ε to R in series with internal resistance r. I = ε/(R + r), terminal p.d. = IR = ε − Ir. A run lasts 12 model seconds over 8 real seconds. Source energy εIt equals load energy I²Rt plus internal heating I²rt. Markers represent conventional current, with schematic speed and spacing; they do not represent individual electrons passing through battery chemistry.

Use the labelled readouts.

Status: Ready

Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Elapsed model time:
Steady current:
Terminal potential difference:
Charge passed at a section:
Source energy supplied:
Energy transferred to load:
Internal thermal energy:
Energy ledger difference:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Energy and Charge Have Different Roles

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

E.m.f. is energy per charge

Click to flip

E.m.f. is energy per charge

ε = Wsource/Q in J/C = V. It describes energy supplied by a source, not a mechanical force.

Rule 2

Terminal p.d. can differ

Click to flip

Terminal p.d. can differ

For a discharging source, Vterminal = ε − Ir. If r = 0 the source is ideal and its terminal p.d. equals its e.m.f.

Rule 3

Charge is conserved

Click to flip

Charge is conserved

In this steady single loop, the same current enters and leaves each component. Q = It measures charge passed through one section, not charge removed from the circuit.

∫

Rule 4

Energy is conserved

Click to flip

Energy is conserved

Wsource = Wload + Winternal in this model. Loads can produce heat, light or useful mechanical transfer; no charge is used up.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “E.m.f. is a force measured in newtons.”

Myth 2: “A glowing bulb gradually uses up the circulating charge.”

6

✦ THE SECOND “AHA!” — Energy per Charge and the Ledger

DOK 2 — Apply

Distinguish source energy from load energy for a source with internal resistance.

Progress
0/4
Source and loadOne closed DC loopSource + resistive loadSteady current+−
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Conserved Quantity

What happens to charge passing through a resistor in steady state?

2

Instructor Q2 — Terminal Voltage

A discharging source has r > 0 and I > 0. How does terminal p.d. compare with ε?

3

Instructor Q3 — Source Energy

A 15 V source supplies energy while 2.4 C passes. Find the energy supplied.

Source Energy givensE.m.f.: 15 VCharge: 2.4 C+−
Given conditions only; arrows and distances are schematic.
J
4

Instructor Q4 — Internal Drop

A source has ε = 10 V and r = 0.8 Ω. Its discharging current is 1.5 A. Find the terminal p.d.

Internal Drop givensE.m.f.: 10 VInternal r: 0.8 ΩCurrent: 1.5 A+−
Given conditions only; arrows and distances are schematic.
V
7

✎ PRACTICE — Independent Energy Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: Source Transfer

A source supplies 63 J of energy as 4.5 C passes. Determine its e.m.f.

Source Transfer givensEnergy: 63 JCharge: 4.5 C+−
Given conditions only; arrows and distances are schematic.
V
DOK 2 — Application

Challenge 2: Source and Load

A 16 V source supplies 5 C through a load. The measured terminal p.d. is 13 V. Find the source energy, load energy and internal thermal energy during this transfer.

Source and Load givensE.m.f.: 16 VTerminal p.d.: 13 VCharge: 5 C+−
Given conditions only; arrows and distances are schematic.
J
J
J
DOK 3 — Audit & Justify

Challenge 3: Audit the Battery Report

A 14 V source passes 3 C while its terminal p.d. is 11 V. A report says its e.m.f. is a 14 N push, all supplied energy reaches the load, and the 3 C disappears in the load. Find the source energy and internal thermal energy. Explain all three errors.

Audit the Battery Report givensE.m.f.: 14 VTerminal p.d.: 11 VCharge: 3 C+−
Given conditions only; arrows and distances are schematic.
J
J
8

☷ CHALLENGE — Source, Load or Conserved Charge

DOK 2 — Apply

Source, Load or Conserved Charge

Classify each statement for the stated steady single-loop model.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain what e.m.f. and terminal p.d. measure, why a source with internal resistance warms, and how energy transfer differs from charge conservation.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.