WONDER — The Mystery
Same Energy, Different Rates
A 12 W device transfers 12 J each second while it operates at that power. Its energy use depends on how long it runs. Two devices can transfer the same total energy at different rates, and devices of different technologies can give different useful light output at the same electrical power.
Model: For a circuit element, electrical power transfer is P = VI with a consistent sign convention. For a resistor obeying V = IR at its operating point, P = I²R = V²/R. Energy E = Pt requires constant power. Rated-device comparisons apply at the stated rating and conditions; brightness needs comparable technology or a stated useful-output model.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo fixed resistors separately operate across the same ideal p.d. The resistance of B is twice that of A. Which has greater electrical power?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
P = V²/R at fixed V, so doubling resistance halves power. This does not apply to a fixed-current comparison.
▶ PLAY — Live Power & Energy Transfer Lab
DOK 2 — InvestigatePredict, measure and compare
Run two p.d.s with resistance and useful-output fraction fixed, then change only resistance. Complete three runs. Watch current markers circulate, light-transfer pulses move outward and useful/thermal energy totals grow.
An ideal steady DC source drives a fixed-resistance model load. P = VI = I²R = V²/R; useful-output fraction η is a declared model parameter. Useful power is ηP and remaining power transfers thermally. A run lasts 60 model seconds over 8 real seconds. Moving circuit markers represent conventional current at schematic speed. Gold outward pulses indicate useful light transfer schematically; pulse speed, number and drawn brightness are not quantitative optical measurements. Accumulated useful energy plus thermal energy equals input energy. No temperature is inferred from power alone.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Use the Right Quantity and Constraint
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Power is a rate
Click to flip
Power is a rate
P = VI. 1 W = 1 J/s. Resistor forms P = I²R and P = V²/R follow from the operating-point relationship V = IR.
Rule 2
Energy includes time
Click to flip
Energy includes time
For constant power, E = Pt in joules when P is in W and t in s. If power varies, energy is the area under the P–t graph.
Rule 3
Squared comparisons need fixed R
Click to flip
Squared comparisons need fixed R
At fixed R, doubling V or I quadruples P. At fixed V, increasing R lowers power; at fixed I, increasing R raises power.
Rule 4
Ratings and useful output
Click to flip
Ratings and useful output
A power rating is for stated operating conditions. At the same p.d., a higher rated resistor-model power implies lower operating R. Different lamp technologies need not have equal brightness at equal electrical power.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A kilowatt-hour is a unit of power.”
Correct — the claim is false.
False. kWh is energy: 1 kWh = 3.6 × 10⁶ J.
Myth 2: “Doubling voltage always doubles resistor power.”
Correct — the claim is false.
False. At fixed resistance it quadruples power; changing device conditions can alter the comparison.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Rates, Energy and Unit Conversion
DOK 2 — ApplyUse constant power where stated and convert seconds and hours consistently.
Instructor Q1 — Unit Meaning
Which quantity is measured in watts?
Instructor Q2 — A Fixed Current
Two resistors carry the same fixed current. One has twice the resistance. How does its power compare?
Instructor Q3 — Electrical Power
A load has 10 V across it and carries 0.8 A. Find power.
Instructor Q4 — Energy in kWh
A device operates at constant 300 W for 2 h. Find energy in kWh.
4/4 — Instructor Questions Completed
State the fixed condition, distinguish watts from joules and track useful output separately.
✎ PRACTICE — Independent Power and Energy Audits
DOK 1–3 — PracticeChallenge 1: Rate and Total
A device has 8 V across it and current 0.75 A for 3 minutes, both constant. Find electrical power and transferred energy.
Step-by-Step Solution
P = 8 × 0.75 = 6 W. t = 180 s, so E = 6 × 180 = 1080 J.
Challenge 2: Equal Useful Output
Two stated model lamps give equal useful light output but draw 36 W and 12 W respectively. Each is used 4 h per day for 30 days. A fictional tariff is 0.20 credits per kWh. Find the energy saved by choosing the 12 W model and the corresponding cost saving.
Step-by-Step Solution
Total time = 120 h; energy saving = (0.036 − 0.012) × 120 = 2.88 kWh. Cost saving = 2.88 × 0.20 = 0.576 credits.
Challenge 3: Audit the Power Report
A fixed 4 Ω resistor operates across an ideal 10 V source for 150 s. A report calls watts accumulated energy, says doubling the p.d. at the same resistance only doubles power, and claims any two lamp technologies with equal electrical power must have equal brightness. Find the initial power, initial energy and power after doubling p.d. Explain all three errors.
Step-by-Step Solution
P = 10²/4 = 25 W; E = 25 × 150 = 3750 J. At 20 V, P = 20²/4 = 100 W, four times larger. Watts measure energy per time, not total energy. Brightness comparisons across technologies require useful visible-light output or efficiency information.
☷ CHALLENGE — Power, Energy or Cost?
DOK 2 — ApplyPower, Energy or Cost?
Classify the quantity represented; a price per kWh is a tariff, not itself an accumulated cost.
0 / 6 correct
Physics Insight
A kWh is energy; credits per kWh is a tariff.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain watts versus joules and kWh, the fixed-variable power comparisons, and why useful output rather than electrical power alone determines cross-technology brightness.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 10.6 — Electrical Power & Energy
Power is a rate; energy is the transfer accumulated over time.
1. Power and resistor forms
P = VI is the electrical energy transfer rate with consistent signs. For a passive resistor, V = IR gives P = I²R = V²/R. These expressions can describe a nonlinear resistor at one operating point, but scaling across points needs the resistance behavior to be stated.
2. Energy and units
For constant power, E = Pt. W × s gives J; kW × h gives kWh. 1 Wh = 3600 J and 1 kWh = 3.6 × 10⁶ J. A kWh is not kW/h. With varying power, integrate P over time or find the area under the P–t graph.
3. What is held fixed?
At fixed R, doubling V quadruples power. At fixed V, doubling R halves power. At fixed I, doubling R doubles power. An apparently conflicting power comparison usually fixes different variables or allows component conditions to change.
4. Ratings and lamps
A rated power applies at its specified voltage and operating conditions. For comparable incandescent lamps at the same rated p.d., higher power means lower hot operating resistance. Real filament resistance varies with temperature, so extrapolating a hot-resistance model far from its rating is unreliable.
5. Useful output and heat
Useful fraction η gives useful energy ηE and remaining thermal transfer (1 − η)E in the declared model. Equal input watts do not ensure equal useful visible-light output across technologies. Power alone does not specify a component temperature; thermal capacity and heat losses also matter.
6. Tariff calculations
Energy cost = energy in kWh × stated price per kWh. Compare identical operating times or explicitly calculate different schedules. The mission tariff is fictional, not a current electricity price. A price per kWh is not a cost until it is multiplied by energy.
Worked practice
C1: 6 W and 1080 J. C2: 2.88 kWh and 0.576 credits saved. C3: 25 W, 3750 J and 100 W; distinguish rate from total, use the squared fixed-R comparison and compare useful light output.
Experiment and access
An ideal steady DC source drives a fixed-resistance model load. P = VI = I²R = V²/R; useful-output fraction η is a declared model parameter. Useful power is ηP and remaining power transfers thermally. A run lasts 60 model seconds over 8 real seconds. Moving circuit markers represent conventional current at schematic speed. Gold outward pulses indicate useful light transfer schematically; pulse speed, number and drawn brightness are not quantitative optical measurements. Accumulated useful energy plus thermal energy equals input energy. No temperature is inferred from power alone.
Predict before Run. Complete three matched measurements; loading a preset does not complete a trial. Pause, Step and Reset work offline. Saved progress resumes paused. Reduced-motion preference uses a completed snapshot on Run. Hints and solutions become available only after a genuine numerical attempt and do not complete a challenge. Teaching checks effort; compare your explanation with these notes or a teacher.
Course scope
Cambridge AS 9702 topic 9.2 includes P = VI, I²R and V²/R. AP Physics 2 topic 11.4 covers electric power and energy transfer. kWh, fictional tariffs and useful-output comparisons are supporting applications.
✓ Crest’s Checklist
- I distinguish power from energy.
- I state the fixed variable in comparisons.
- I convert kWh to joules correctly.
- I use time in the matching unit system.
- I qualify brightness and rating comparisons.
— Crest ☆ “Power is a rate; energy is the transfer accumulated over time.”
Mission 10.6 Complete! · All 10 levels cleared · PHYSICS CREST
★ Electrical Power & Energy Master
State the fixed condition, distinguish watts from joules and track useful output separately.