WONDER — The Mystery
One Open Lamp: Which Paths Remain?
In a single series lamp string, one open filament breaks the only path. In independent parallel branches, another branch can remain complete. Its current remains unchanged if an ideal source keeps the branch p.d. fixed. A real source can change terminal p.d. when total current changes, so unchanged brightness is conditional.
Model: Treat lamps as fixed resistors with ideal wires and a constant-p.d. ideal source. An open lamp is a broken path, not a short. Use electrical power only as a qualitative brightness indicator for identical modeled lamps. Series means the same unbranched current path; parallel means the same pair of nodes, regardless of drawing orientation.
PREDICT — Commit to Your Answer
DOK 2 — PredictThree fixed-resistance lamps are in one series path. One filament becomes open circuit. What happens after transients settle?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
An open filament interrupts the only path. The remaining series lamps carry no steady current; an open fault must not be modeled as a short.
▶ PLAY — Live Series, Parallel & Open-Lamp Lab
DOK 2 — InvestigatePredict, measure and compare
Run two lamp counts in series with resistance fixed, then change only topology. Complete three runs. Watch current markers follow the actual routes and compare each intact lamp’s power. Open lamp paths to see which currents stop.
An ideal constant 9 V source drives N identical fixed R lamps. Mode 0 is one series path; mode 1 is N independent parallel branches. The first selected number of lamp paths is opened. In series, any open lamp stops all current. In parallel, intact branches each carry 9/R and the source current is their sum. A run lasts 8 model seconds over 8 real seconds. Colored markers show conventional-current paths with schematic speeds and counts; numerical readouts express current balance. Glow indicates qualitative electrical power for these identical modeled lamps. Drawing sizes are schematic, and the ideal source keeps the intact parallel branch p.d. fixed.
Status: Ready
Playback: 8 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Path and Node Definitions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Series current
Click to flip
Series current
Elements in one unbranched path carry the same steady current. Their p.d.s add to the source p.d. Their individual drops need not be equal unless their resistances are equal.
Rule 2
Parallel p.d.
Click to flip
Parallel p.d.
Branches connected between the same two nodes have equal p.d. Currents divide according to branch resistance and need not be equal. Source current is the sum of branch currents.
Rule 3
Equivalent resistance
Click to flip
Equivalent resistance
Series: Req = ΣR. Parallel: 1/Req = Σ(1/R). Adding a positive-resistance parallel branch reduces equivalent resistance; at fixed ideal source p.d., source current increases.
Rule 4
Opening a path
Click to flip
Opening a path
Opening any element in the only series path stops that path’s current. Opening a parallel branch leaves other complete branches; their currents stay unchanged for an ideal constant-p.d. source.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Parallel branches always carry equal currents.”
Correct — the claim is false.
False. Their p.d.s are equal, but different resistances give different branch currents.
Myth 2: “Opening one branch dims the others even with an ideal fixed-p.d. source.”
Correct — the claim is false.
False. Each remaining branch retains its p.d.; with its resistance fixed, current and power remain unchanged.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Same Current or Same P.d.?
DOK 2 — ApplyUse ideal-source conditions and distinguish open branches from shorted elements.
Instructor Q1 — Series Drops
Two unequal positive resistors are in series. Which is equal for both?
Instructor Q2 — Parallel Nodes
Two unequal resistors share the same two nodes. Which is equal for both?
Instructor Q3 — Series Current
Two identical 4 Ω resistors are in series across an ideal 10 V source. Find loop current.
Instructor Q4 — Parallel Source Current
Two identical 8 Ω resistors are in parallel across an ideal 12 V source. Find source current.
4/4 — Instructor Questions Completed
Use the topology definitions before comparing brightness or a fault response.
✎ PRACTICE — Independent Path and Branch Audits
DOK 1–3 — PracticeChallenge 1: Series Voltage Drops
Resistors A = 3 Ω and B = 6 Ω lie in one series path across an ideal 9 V source. Find loop current and the p.d. across A.
Step-by-Step Solution
Req = 9 Ω; I = 9/9 = 1 A. VA = 1 × 3 = 3 V; VB = 6 V.
Challenge 2: Open One Parallel Branch
Resistors A = 6 Ω and B = 12 Ω form independent parallel branches across an ideal 12 V source. Find initial source current, then the source current and p.d. across A after only B’s branch is opened.
Step-by-Step Solution
Initial IA = 2 A and IB = 1 A, so Itotal = 3 A. Opening B leaves A across 12 V: its current and remaining source current are 2 A.
Challenge 3: Audit the Topology Report
A = 5 Ω and B = 7 Ω are first in series, then separately rewired in parallel, using the same ideal 18 V source. A report says series p.d.s are always equal, parallel currents are always equal, and opening B’s parallel branch dims A. Find the two series p.d.s and the two initial parallel branch currents. Explain all three errors.
Step-by-Step Solution
Series current is 1.5 A, giving VA = 7.5 V and VB = 10.5 V, not equal. Parallel branches each have 18 V, giving IA = 3.6 A and IB = 18/7 A, not equal. Opening B leaves A across the ideal 18 V source, so A’s current and power are unchanged.
☷ CHALLENGE — Series, Parallel or General Conservation?
DOK 2 — ApplySeries, Parallel or General Conservation?
Classify the defining statement or conservation principle.
0 / 6 correct
Physics Insight
A drawing’s appearance does not replace tracing actual nodes.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain series and parallel using current paths and shared nodes, then compare unequal resistors and the effects of opening a path with an ideal source.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 10.7 — Series & Parallel Circuits
Use nodes and complete paths to predict current, voltage and open-branch effects.
1. Series definition
Series elements share an unbranched path, so their steady current is the same. The loop rule gives Vsource = ΣVload, and Vload = IR gives Req = ΣR. Equal voltage division requires equal resistances, not merely a series connection.
2. Parallel definition
Parallel branches connect between the same two nodes, so each has the same p.d. Currents may differ: Ik = V/Rk. Junction conservation gives Itotal = ΣIk and 1/Req = Σ(1/Rk). For positive finite branch resistances, Req is below the smallest branch resistance.
3. Adding lamps
With identical fixed lamps and an ideal fixed source p.d., adding series lamps reduces current and each lamp’s power. Adding independent parallel lamps leaves each existing branch p.d. and power unchanged but increases source current and total power. These are conditional statements, not universal lamp behavior.
4. Open and short faults
An open filament interrupts its path. In a single series string all current stops; in parallel other branches can remain complete. A short across a series lamp can instead bypass it and increase the remaining current. Never treat an open and a short as the same fault.
5. Real-source limits
A real source has internal resistance. Opening a parallel branch reduces total current and can raise terminal p.d., changing the power of remaining branches. Real light strings can include additional wiring and bypass devices; the ideal independent-branch model is not a claim about every product.
6. Switch placement
A switch in series with one branch controls that branch. A switch in the common source path can interrupt all branches. Trace complete routes and identify the two nodes before assigning series or parallel labels.
Worked practice
C1: 1 A and VA = 3 V. C2: initial source 3 A, then 2 A with A still at 12 V. C3: series drops 7.5 V and 10.5 V; parallel currents 3.6 A and 18/7 A; opening B leaves A unchanged for the ideal source.
Experiment and access
An ideal constant 9 V source drives N identical fixed R lamps. Mode 0 is one series path; mode 1 is N independent parallel branches. The first selected number of lamp paths is opened. In series, any open lamp stops all current. In parallel, intact branches each carry 9/R and the source current is their sum. A run lasts 8 model seconds over 8 real seconds. Colored markers show conventional-current paths with schematic speeds and counts; numerical readouts express current balance. Glow indicates qualitative electrical power for these identical modeled lamps. Drawing sizes are schematic, and the ideal source keeps the intact parallel branch p.d. fixed.
Predict before Run. Complete three matched measurements; loading a preset does not complete a trial. Pause, Step and Reset work offline. Saved progress resumes paused. Reduced-motion preference uses a completed snapshot on Run. Hints and solutions become available only after a genuine numerical attempt and do not complete a challenge. Teaching checks effort; compare your explanation with these notes or a teacher.
Course scope
Cambridge AS 9702 topic 10.2 and AP Physics 2 topic 11.5 cover series and parallel combinations. The junction and loop ideas express charge and energy conservation. Identical fixed lamps and an ideal source are explicit brightness assumptions.
✓ Crest’s Checklist
- I define series by its unbranched path.
- I define parallel by two shared nodes.
- I distinguish equal current from equal p.d.
- I add branch currents at a junction.
- I state source assumptions when a path opens.
— Crest ☆ “Use nodes and complete paths to predict current, voltage and open-branch effects.”
Mission 10.7 Complete! · All 10 levels cleared · PHYSICS CREST
★ Series & Parallel Circuits Master
Use the topology definitions before comparing brightness or a fault response.