WONDER — The Mystery
Zero Mean Voltage Can Still Heat a Resistor
A zero-centred sinusoidal voltage has zero signed mean over a complete cycle. Its squared voltage does not average to zero, so it transfers energy to a resistor. RMS connects the changing waveform to a DC source producing the same mean heating in that same resistance.
Model: For any periodic waveform, Vrms = √[(1/T)∫v²dt] over a full period. For a zero-centred sinusoid only, Vrms = V0/√2. A fixed pure resistor has instantaneous p = v²/R and mean P = Vrms²/R. In a general load mean power is ⟨vi⟩, not automatically Vrms Irms.
PREDICT — Commit to Your Answer
DOK 2 — PredictA zero-centred sinusoidal voltage drives a fixed resistor. Over one complete cycle, signed mean voltage is zero. What about mean heating?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Current changes sign together with voltage in a resistor, so vi = v²/R is nonnegative. Signed mean voltage and RMS voltage are distinct.
▶ PLAY — Live AC and Equivalent DC Heating
DOK 2 — InvestigatePredict, measure and compare
Compare two AC voltage amplitudes at one resistance, then two resistances at one amplitude. Watch current-marker reversal and DC circulation. Run a complete cycle and compare total resistor energy.
An ideal 50 Hz zero-centred sinusoidal voltage v = V0 sin(2πft) drives a fixed pure resistor R with no inductance. A second identical resistor has DC voltage V0/√2. One physical cycle T = 0.020 s plays over 6 real seconds. AC current is v/R and DC current is V0/(√2 R). Conventional positive-current markers move around each connection schematic with path speed proportional to signed current; their distance scale is illustrative, not actual carrier drift speed. AC markers return to their original positions after a full cycle; DC markers continue circulating. AC heating energy is (V0²/R)[t/2−sin(2ωt)/(4ω)], and DC energy is (V0²/(2R))t. These energies are equal at the end of a full cycle, although instantaneous powers differ. Coloured resistor fill is an instantaneous power indicator, not temperature.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Square, Mean, Then Root
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Definition before shortcut
Click to flip
Definition before shortcut
RMS is the nonnegative square root of the mean squared quantity over a stated interval. For periodic steady waveforms use a full period. Peak/√2 applies to a zero-centred sinusoid, not every alternating waveform.
Rule 2
Sine-wave conversions
Click to flip
Sine-wave conversions
For v = V0 sinωt, Vrms = V0/√2 and Irms = I0/√2. Signed full-cycle mean voltage is zero. Positive-half-cycle mean is 2V0/π; it differs from RMS. A DC offset changes both mean and RMS.
Rule 3
Resistive power
Click to flip
Resistive power
For constant pure R, p(t) = v²/R and mean P = Vrms²/R = Irms²R. In a sine wave peak power is twice the mean. For a general load use ⟨vi⟩; sinusoidal voltage and current with phase φ give Vrms Irms cosφ.
Rule 4
Energy equivalence
Click to flip
Energy equivalence
A DC voltage equal in magnitude to Vrms gives the same mean heating in the same resistor. Equal mean powers imply equal energy over a full cycle, not identical instantaneous powers, current directions or temperature fluctuations.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every alternating waveform has RMS equal to peak divided by √2.”
Correct — the claim is false.
False. A symmetric square wave has RMS equal to its amplitude. Use the RMS definition for other shapes.
Myth 2: “Zero signed mean voltage means zero resistor heating.”
Correct — the claim is false.
False. Mean v² is positive for a nonzero waveform, giving positive heat.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Sine-Wave RMS and Power
DOK 2 — ApplyThese numerical conversions specify a zero-centred sinusoid.
Instructor Q1 — Negative Half-Cycle
For a purely resistive sinusoidal load, negative voltage produces:
Instructor Q2 — Square Wave Extension
A waveform is +6 V for half a cycle and −6 V for the other half. Its RMS is:
Instructor Q3 — RMS from Peak
A zero-centred sine wave has peak amplitude 40 V. Find RMS voltage.
Instructor Q4 — Resistive Mean Power
An ideal AC source has RMS voltage 12 V across a pure 8.0 Ω resistor. Find mean power.
4/4 — Instructor Questions Completed
Average the square first; squaring the signed average loses the heating effect.
✎ PRACTICE — Independent RMS and Power Audits
DOK 1–3 — PracticeChallenge 1: Sine-Wave RMS
A zero-centred sinusoidal voltage has peak amplitude 30 V. Find its RMS voltage.
Step-by-Step Solution
Vrms = 30/√2 = 15√2 ≈ 21.2 V.
Challenge 2: Current and Cycle Energy
A zero-centred sinusoidal voltage of peak amplitude 24 V and frequency 25 Hz drives a pure 12 Ω resistor. Find RMS current and the heat deposited in one complete cycle.
Step-by-Step Solution
Irms = 24/(√2×12) = √2 A. Mean P = 24²/(2×12) = 24 W; T = 1/25 = .040 s, so energy = 0.960 J.
Challenge 3: Audit a Non-Sinusoidal Claim
A periodic voltage is +8.0 V for 25% of each cycle and −4.0 V for the remaining 75%, across a pure 4.0 Ω resistor. Find signed mean voltage, RMS voltage and mean heating power. A report uses peak/√2 without checking shape, claims all AC has zero mean, and predicts negative heating during negative voltage. Correct all three claims using the time fractions and explain what equivalent DC means.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Mean = .25(8)+.75(−4) = −1.0 V. Mean v² = .25(64)+.75(16) = 28 V²; Vrms = √28 ≈ 5.29 V; mean P = 28/4 = 7.0 W. Peak/√2 is a sine-only shortcut. AC can have an offset or unequal halves, giving nonzero mean. Resistor power v²/R is positive for either polarity. A constant DC magnitude √28 V gives the same mean heating in this resistor, not the same instantaneous waveform.
☷ CHALLENGE — The RMS Procedure
DOK 2 — ApplyThe RMS Procedure
Order the general RMS calculation and its resistive-power application.
0 / 6 correct
Physics Insight
Average the square first; squaring the signed average loses the heating effect.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain the RMS definition, why zero signed mean can coexist with heat, the sine-wave shortcut and its limits, cycle energy and equivalent DC.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 11.16 — RMS Voltage and AC Power
Reach the Peak of Understanding
1. Definition before shortcut
RMS is the nonnegative square root of the mean squared quantity over a stated interval. For periodic steady waveforms use a full period. Peak/√2 applies to a zero-centred sinusoid, not every alternating waveform.
2. Sine-wave conversions
For v = V0 sinωt, Vrms = V0/√2 and Irms = I0/√2. Signed full-cycle mean voltage is zero. Positive-half-cycle mean is 2V0/π; it differs from RMS. A DC offset changes both mean and RMS.
3. Resistive power
For constant pure R, p(t) = v²/R and mean P = Vrms²/R = Irms²R. In a sine wave peak power is twice the mean. For a general load use ⟨vi⟩; sinusoidal voltage and current with phase φ give Vrms Irms cosφ.
4. Energy equivalence
A DC voltage equal in magnitude to Vrms gives the same mean heating in the same resistor. Equal mean powers imply equal energy over a full cycle, not identical instantaneous powers, current directions or temperature fluctuations.
5. Numerical precision
A 170 V peak sinusoid has RMS 120.208 V, not exactly 120 V. A precisely 120 V RMS sinusoid has peak 169.706 V. Approximate values should remain labelled approximate.
6. Waveform and meter limits
A true-RMS measurement is subject to instrument bandwidth and crest-factor specifications. Sine-calibrated average-responding meters can give inaccurate RMS readings for other shapes. This mission uses supplied and simulated circuits.
Worked independent practice
C1: 15√2 V ≈ 21.2 V. C2: √2 A and 0.960 J. C3: −1.0 V signed mean, √28 V RMS and 7.0 W mean heating.
Live investigation and access
An ideal 50 Hz zero-centred sinusoidal voltage v = V0 sin(2πft) drives a fixed pure resistor R with no inductance. A second identical resistor has DC voltage V0/√2. One physical cycle T = 0.020 s plays over 6 real seconds. AC current is v/R and DC current is V0/(√2 R). Conventional positive-current markers move around each connection schematic with path speed proportional to signed current; their distance scale is illustrative, not actual carrier drift speed. AC markers return to their original positions after a full cycle; DC markers continue circulating. AC heating energy is (V0²/R)[t/2−sin(2ωt)/(4ω)], and DC energy is (V0²/(2R))t. These energies are equal at the end of a full cycle, although instantaneous powers differ. Coloured resistor fill is an instantaneous power indicator, not temperature.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
A Level 9702 21.1 requires RMS/peak relations and mean power in a resistive sinusoidal load. RMS and AC power are declared enrichment beyond the listed AP Physics 2 magnetism objectives. Non-sinusoidal weighted RMS and phase-dependent power are extensions.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I specify the waveform and interval.
- I average squares before rooting.
- I distinguish peak, signed mean and RMS.
- I use pure-resistor power only where valid.
- I distinguish equal mean heating from instant equality.
— Crest ☆ “Reach the Peak of Understanding”
Mission 11.16 Complete! · All 10 levels cleared · PHYSICS CREST
★ RMS Voltage and AC Power Investigator
Average the square first; squaring the signed average loses the heating effect.