WONDER — The Mystery
Presence or Change?
A fixed magnet near a stationary coil can produce a nonzero magnetic flux while the induced e.m.f. is zero. Approach and withdrawal can produce opposite responses. What changes when the magnet moves relative to the coil?
Model: Magnetic flux is the surface integral of B through a chosen oriented area, not a literal count of drawn lines. For a uniform field and flat loop, Φ = BA cosθ with θ measured from the area normal. Induction depends on change of flux linkage; current additionally needs a conducting path.
PREDICT — Commit to Your Answer
DOK 2 — PredictA magnet and small coil translate together, keeping relative geometry fixed. There are no other changing external fields and the ideal model gives constant flux linkage. What induced e.m.f. results?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Faraday’s law depends on the rate of change of flux linkage. In the stated constant-linkage model the induced e.m.f. is zero.
▶ PLAY — A Magnet Passes Through a Closed Coil
DOK 2 — InvestigatePredict, measure and compare
Measure two speeds with the same polarity, then reverse only polarity at one of those speeds. Watch the magnet move and the signed galvanometer response reverse with the rate of flux change.
Extension model: a point dipole of signed moment ±0.50 A m² moves along the axis of a thin circular 50-turn coil of radius a = 0.025 m. z = 0.120 − vt metres. Exact point-dipole flux through each circular loop is Φ = (μ₀ m a²)/(2(a²+z²)³ᐟ²), with μ₀ = 4π×10⁻⁷ SI. E.m.f. = −50 dΦ/dt; current = e.m.f./10 Ω in a closed resistive circuit, neglecting self-inductance and back reaction. Positive normal points +z; positive circulation is counterclockwise viewed from +z. Each run lasts 6 model seconds over 6 real seconds. Bars, turns and charge-marker speed are schematic. Pause freezes the model state; it is not a physical stop of the prescribed trajectory. Set v = 0 to investigate a stationary magnet.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Flux Is an Oriented Surface Quantity
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Field and flux differ
Click to flip
Field and flux differ
B is a vector field measured in teslas. Flux Φ is an oriented surface quantity measured in webers. For a uniform field over a flat area Φ = BA cosθ; in a nonuniform field contributions must be summed over the surface.
Rule 2
Choose the normal
Click to flip
Choose the normal
θ is between B and the area normal, not between B and the plane. At 0° the positive flux is maximal; at 90° it is zero. Reversing the chosen normal reverses the flux sign.
Rule 3
Linkage and induction
Click to flip
Linkage and induction
For N identical turns with equal flux, linkage is NΦ. E.m.f. is −d(NΦ)/dt. Nonzero flux need not mean nonzero e.m.f.; changing B, A or orientation matters only when it changes linkage.
Rule 4
E.m.f. is not current
Click to flip
E.m.f. is not current
An open coil may have induced e.m.f. without sustained current. In a closed resistive idealization current equals e.m.f./R. Real circuits can also have inductance and other effects.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “A nonzero constant flux linkage must induce a continuous current.”
Correct — the claim is false.
False. Constant linkage gives zero induced e.m.f. in this model.
Myth 2: “Flux is the number of lines an artist draws through the coil.”
Correct — the claim is false.
False. Drawn line density is only a representation. Flux has the physical unit Wb and is calculated from the field and oriented area.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Normal Angles and Linkage
DOK 2 — ApplyUse the angle to the area normal and keep per-turn quantities separate.
Instructor Q1 — Maximum Flux
A uniform B passes through a fixed flat loop. Positive flux is greatest when the normal is:
Instructor Q2 — Open Loop
An open coil’s flux linkage changes. Which statement is possible?
Instructor Q3 — Uniform Flux
A flat area 0.030 m² has a uniform 0.40 T field normal to it. Find flux.
Instructor Q4 — Equal Turns
An 80-turn coil has flux 0.0020 Wb per turn. Find flux linkage.
4/4 — Instructor Questions Completed
Distinguish flux, flux linkage, induced e.m.f. and current before interpreting a magnet–coil experiment.
✎ PRACTICE — Independent Flux and Evidence Problems
DOK 1–3 — PracticeChallenge 1: Oriented Flux
A uniform 0.35 T magnetic field passes through a flat loop of area 0.012 m². The field makes 60° with the positive area normal. Find the signed magnetic flux.
Step-by-Step Solution
Φ = 0.35 × 0.012 × cos60° = 0.0021 Wb.
Challenge 2: Normal or Plane?
A 120-turn coil of area 0.0080 m² lies in a uniform 0.25 T field. The field is 30° to the plane of the coil and points through its chosen positive side. Find flux per turn and total flux linkage.
Step-by-Step Solution
Normal angle = 60°. Φ = 0.25 × 0.0080 × 0.5 = 0.0010 Wb. NΦ = 0.120 Wb.
Challenge 3: Audit a Fixed Coil
A stationary 60-turn coil of area 0.010 m² is held in a constant uniform 0.20 T field making 60° with its positive normal. A report says: “Flux per turn is 0.0020 Wb, flux linkage has units tesla, and the nonzero linkage guarantees a steady induced e.m.f.” Find the correct flux per turn and the induced e.m.f. Explain all three errors and state what extra information would be needed to calculate current if the geometry began changing.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Φ = 0.20 × 0.010 × 0.5 = 0.0010 Wb; linkage = 0.060 Wb, not tesla. Its derivative is zero, so the induced e.m.f. is zero. To calculate a current after a change one needs the rate of linkage change plus the circuit connections and resistance, and inductance if significant.
☷ CHALLENGE — Induced E.M.F., Current or Neither?
DOK 2 — ApplyInduced E.M.F., Current or Neither?
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Distinguish flux, flux linkage, induced e.m.f. and current before interpreting a magnet–coil experiment.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain why a moving magnet can induce an e.m.f., why common motion can leave linkage unchanged, why an open coil need not carry current, and how a plane angle differs from a normal angle.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 11.3 — Magnetic Flux and Induction
Reach the Peak of Understanding
1. Field and flux differ
B is a vector field measured in teslas. Flux Φ is an oriented surface quantity measured in webers. For a uniform field over a flat area Φ = BA cosθ; in a nonuniform field contributions must be summed over the surface.
2. Choose the normal
θ is between B and the area normal, not between B and the plane. At 0° the positive flux is maximal; at 90° it is zero. Reversing the chosen normal reverses the flux sign.
3. Linkage and induction
For N identical turns with equal flux, linkage is NΦ. E.m.f. is −d(NΦ)/dt. Nonzero flux need not mean nonzero e.m.f.; changing B, A or orientation matters only when it changes linkage.
4. E.m.f. is not current
An open coil may have induced e.m.f. without sustained current. In a closed resistive idealization current equals e.m.f./R. Real circuits can also have inductance and other effects.
5. Rain analogy: its limits
Rain intensity × projected opening area corresponds to a collection rate, not the total water accumulated. It illustrates projection only. Magnetic flux is not fluid flow or charge flow, and a bucket’s water level is not induced current.
6. Three changes, one criterion
Changing B, A or orientation may change linkage, but simultaneous changes can cancel and some instantaneous derivatives vanish. Constant linkage gives zero induced e.m.f. A nonzero field can coexist with zero flux or zero e.m.f.
Worked independent practice
C1: 2.1 × 10⁻³ Wb. C2: 1.0 × 10⁻³ Wb per turn and 0.120 Wb linkage. C3: 1.0 × 10⁻³ Wb per turn, 0.060 Wb linkage and zero induced e.m.f.; the report overlooks the cosine, uses the wrong unit and confuses a value with its rate of change.
Live investigation and access
Extension model: a point dipole of signed moment ±0.50 A m² moves along the axis of a thin circular 50-turn coil of radius a = 0.025 m. z = 0.120 − vt metres. Exact point-dipole flux through each circular loop is Φ = (μ₀ m a²)/(2(a²+z²)³ᐟ²), with μ₀ = 4π×10⁻⁷ SI. E.m.f. = −50 dΦ/dt; current = e.m.f./10 Ω in a closed resistive circuit, neglecting self-inductance and back reaction. Positive normal points +z; positive circulation is counterclockwise viewed from +z. Each run lasts 6 model seconds over 6 real seconds. Bars, turns and charge-marker speed are schematic. Pause freezes the model state; it is not a physical stop of the prescribed trajectory. Set v = 0 to investigate a stationary magnet.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
9702 A Level 20.5 covers flux, linkage and induction. AP Physics 2 12.4 covers induction and Faraday’s law. The exact point-dipole circular-loop flux used in Stage 3 is enrichment, not a required derivation.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I distinguish B and Φ.
- I use the angle to the area normal.
- I distinguish per-turn flux from linkage.
- I use changing linkage rather than motion as the induction criterion.
- I check whether a current path is closed.
— Crest ☆ “Reach the Peak of Understanding”
Mission 11.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Magnetic Flux and Induction Investigator
Distinguish flux, flux linkage, induced e.m.f. and current before interpreting a magnet–coil experiment.