WONDER — The Mystery
A Wire Changes a Compass Reading
Oersted observed that a current-carrying wire could deflect a nearby compass. A compass responds to the total local magnetic field, so its deflection depends on both the wire and background field. Can changing current reverse the response?
Model: Use conventional current for the right-hand grip rule. Electrons in a metal drift oppositely. A long straight wire has circular magnetic field lines in planes perpendicular to it; the total field also includes background sources.
PREDICT — Commit to Your Answer
DOK 2 — PredictA long straight wire carries conventional current out of the page. At a point to the right of the wire, what direction is the wire’s magnetic field?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Point the right thumb toward you; fingers curl counterclockwise. At the wire’s right side the tangent is upward.
▶ PLAY — Oersted’s Compass: Wire Plus Background Field
DOK 2 — InvestigatePredict, measure and compare
Measure two currents at the same radius, then change only radius at one of those currents. Compare the compass angle and field. Also investigate zero and reversed current.
Ideal long straight wire normal to the viewing plane. Positive conventional current is out of the page; at the probe on +x its field is +y. Bwire = μ₀I/(2πr), with μ₀ = 4π×10⁻⁷ SI. A fixed Earth-like background field is +40 μT along x. The compass turns under overdamped torque toward the total vector, starting at θ = 0°. Each run lasts 6 model seconds over 6 real seconds. The wire’s circular field arrows and carrier inset are schematic; the moving markers represent electron drift, opposite to conventional current, not electron transit speeds or energy propagation. Zero wire current leaves the background field present.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Current, Geometry and Background
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Conventional current
Click to flip
Conventional current
For field direction use conventional current, the direction positive charge would move. Electrons drifting in a metal move in the opposite direction.
Rule 2
Circular field
Click to flip
Circular field
For a long isolated straight wire, the field circles the wire axis. It is tangent to a circle, not radial and not along the wire. Reversing current reverses the field.
Rule 3
A local superposition
Click to flip
A local superposition
A compass responds to the total horizontal field. Its deflection is not generally proportional to current; with perpendicular wire and background fields tanθ = Bwire/Bbackground.
Rule 4
One electromagnetic framework
Click to flip
One electromagnetic framework
A stationary point charge has an electric field and no magnetic field from translational motion in its rest frame. Currents and magnetic dipoles produce magnetic fields. Time-varying magnetic flux is associated with a circulating electric field; a current still needs a path.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Electron drift points in the same direction as conventional current in a metal.”
Correct — the claim is false.
False. The signs of the mobile carriers make their drift opposite to conventional current.
Myth 2: “Opening the wire circuit removes every magnetic field at a nearby compass.”
Correct — the claim is false.
False. The wire’s steady field disappears as its current becomes zero, but Earth and other sources may still contribute.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Direction and Source Tests
DOK 2 — ApplyAssume steady current, a long wire and a stated laboratory frame.
Instructor Q1 — Current Reversal
Reverse a fixed wire’s conventional current. What changes about its own field?
Instructor Q2 — Static Charge
For an ideal point charge at rest in its own inertial frame, which is correct?
Instructor Q3 — Unit Conversion
Express a 28 μT field magnitude in teslas.
Instructor Q4 — Vector Magnitude
Two perpendicular fields at a point have components +30 μT and +40 μT. Find total magnitude.
4/4 — Instructor Questions Completed
Separate the source field from the total local field, and conventional current from electron drift.
✎ PRACTICE — Independent Current and Compass Audits
DOK 1–3 — PracticeChallenge 1: Field Units
A probe measures a magnetic field magnitude of 75 μT. Express this magnitude in teslas.
Step-by-Step Solution
75 μT = 7.5 × 10⁻⁵ T.
Challenge 2: A Controlled Current Change
At a fixed point near a long straight wire, the wire alone contributes 18 μT when conventional current is 3.0 A. The geometry is unchanged and the current becomes 5.0 A in the same direction. Find the new wire-field magnitude and its ratio to the original.
Step-by-Step Solution
Bnew = 18 × 5/3 = 30 μT; the field ratio is 5/3.
Challenge 3: Audit the Oersted Report
At a probe right of a long wire, current is toward the observer. The wire’s field is +30 μT along y and Earth’s field is +40 μT along x. A report says: “Total field is 70 μT; reversing current makes the total field zero; electrons drift toward the observer.” Find the original total magnitude. Correct all three errors and propose a current-reversal comparison that keeps the background field and probe geometry controlled.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
The total magnitude is √(40² + 30²) = 50 μT. Reversal changes By to −30 μT while Bx remains +40 μT, so the magnitude remains 50 μT and the compass angle changes from +36.87° to −36.87°. Electron drift is away from the observer. Hold probe position and background field fixed, compare equal positive/negative currents and an I = 0 control.
☷ CHALLENGE — Source, Carrier or Field Response?
DOK 2 — ApplySource, Carrier or Field Response?
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Separate the source field from the total local field, and conventional current from electron drift.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain Oersted’s compass observation using current, circular magnetic field, background-field superposition and electron drift. State the viewing direction for the grip rule.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 11.4 — The Magnetic Effect of Current
Reach the Peak of Understanding
1. Conventional current
For field direction use conventional current, the direction positive charge would move. Electrons drifting in a metal move in the opposite direction.
2. Circular field
For a long isolated straight wire, the field circles the wire axis. It is tangent to a circle, not radial and not along the wire. Reversing current reverses the field.
3. A local superposition
A compass responds to the total horizontal field. Its deflection is not generally proportional to current; with perpendicular wire and background fields tanθ = Bwire/Bbackground.
4. One electromagnetic framework
A stationary point charge has an electric field and no magnetic field from translational motion in its rest frame. Currents and magnetic dipoles produce magnetic fields. Time-varying magnetic flux is associated with a circulating electric field; a current still needs a path.
5. Limits of the wire approximation
B = μ₀I/(2πr) applies outside a sufficiently long thin wire in vacuum or air, away from significant end effects. Finite wire geometry and magnetic materials require other models.
6. Electric field-line distinction
Electrostatic field lines can begin or end on charges or extend to infinity. An induced electric field from changing magnetic flux can circulate in closed loops. It is therefore too broad to say all electric field lines start and end on charges.
7. Evidence rather than a slogan
A compass deflection with circuit changes supports a link between electric current and magnetic field. A useful investigation controls probe geometry, background fields and current, and compares positive, negative and zero current. No deflection in a special geometry does not prove zero wire field.
Worked independent practice
C1: 7.5 × 10⁻⁵ T. C2: 3.0 × 10⁻⁵ T and ratio 5/3. C3: 5.0 × 10⁻⁵ T. Reversal changes the wire component, not the fixed Earth component; electron drift is opposite to conventional current.
Live investigation and access
Ideal long straight wire normal to the viewing plane. Positive conventional current is out of the page; at the probe on +x its field is +y. Bwire = μ₀I/(2πr), with μ₀ = 4π×10⁻⁷ SI. A fixed Earth-like background field is +40 μT along x. The compass turns under overdamped torque toward the total vector, starting at θ = 0°. Each run lasts 6 model seconds over 6 real seconds. The wire’s circular field arrows and carrier inset are schematic; the moving markers represent electron drift, opposite to conventional current, not electron transit speeds or energy propagation. Zero wire current leaves the background field present.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
9702 A Level 20.4 covers long-wire and solenoid fields and their directions; AP Physics 2 12.3 covers current-generated fields. The overdamped compass dynamics and Earth-plus-wire model are supporting enrichment.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I state the current and viewing direction.
- I use conventional current for the grip rule.
- I add background and wire fields as vectors.
- I do not assume deflection is linear in current.
- I distinguish static point charges from magnetic dipoles.
— Crest ☆ “Reach the Peak of Understanding”
Mission 11.4 Complete! · All 10 levels cleared · PHYSICS CREST
★ The Magnetic Effect of Current Investigator
Separate the source field from the total local field, and conventional current from electron drift.