WONDER — The Mystery
Count Complete Returns, Not Every Crossing
An oscillator passes equilibrium twice per full cycle, moving in opposite directions. To measure a period, start and finish at the same phase: the same position and direction, or successive matching extremes. Time many complete cycles, then divide by the correct count.
Model: For a stable periodic oscillator, T = Δt/N and f = N/Δt = 1/T when the interval contains N complete cycles. Amplitude is maximum displacement from equilibrium, half the peak-to-peak range for a symmetric oscillation. Period, frequency and amplitude do not alone specify every possible waveform or starting phase.
PREDICT — Commit to Your Answer
DOK 2 — PredictA symmetric oscillator crosses equilibrium once to the right and next to the left. The time between those two crossings is:
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
A full cycle returns to matching phase. Consecutive opposite-direction crossings are separated by T/2.
▶ PLAY — Live Cycle Counter and Timing Trace
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, change only cycle time, then change only amplitude. Watch the moving cart, count complete returns and compare the running clock with the last completed-cycle timing interval.
Prescribed sinusoidal kinematics x = A cos(2πt/T), represented by a moving cart; no pendulum-length or spring-force model is implied. Controls set cycle time T, amplitude A and the number N of complete cycles to observe. The trial lasts NT physical seconds, played over six real seconds. Gold trace marks identify completed returns to the positive extreme. Between completed cycles, the measurement uses the time of the last matched-phase return, not the current partial-cycle clock. Before one full cycle, measured T and f are unavailable. Cart displacement scale is 3000 pixels/m; trace displacement scale is 600 pixels/m. The time axis spans the full physical trial duration. Amplitude independence of T is imposed by this kinematic model, not proven for every oscillator.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Measurement, Calibration and Uncertainty
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Count complete cycles
Click to flip
Count complete cycles
T = Δt/N, f = N/Δt and Tf = 1 for a stable periodic signal. Frequency has units Hz; period has units s. Same position with opposite direction is a half-cycle marker, not a full return.
Rule 2
Measure amplitude
Click to flip
Measure amplitude
Amplitude is maximum displacement from equilibrium; peak-to-peak range is 2A for a symmetric signal. A voltage trace has voltage amplitude; it becomes mechanical displacement only with a stated transducer calibration.
Rule 3
Use calibrated traces
Click to flip
Use calibrated traces
On an oscilloscope, period equals horizontal divisions per full cycle times time per division. Signal amplitude equals vertical displacement from the equilibrium line times gain per division. Use consistent prefixes, and distinguish amplitude from peak-to-peak voltage.
Rule 4
Control uncertainty and assumptions
Click to flip
Control uncertainty and assumptions
Timing many complete cycles reduces fractional effect of a fixed total start/stop timing uncertainty: ΔT/T = Δt/t if the count is exact. Repeats help assess scatter; this does not remove systematic error, miscounting or changing period. Pendulum amplitude independence is only a small-angle approximation.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every equilibrium crossing completes one whole oscillation.”
Correct — the claim is false.
False. Opposite-direction crossings are half a cycle apart.
Myth 2: “Doubling amplitude can never change an oscillator’s period or maximum speed.”
Correct — the claim is false.
False. Even ideal SHM has v_max = ωA, so speed grows with amplitude. Period independence needs a linear or small-oscillation model; it is not universal.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Count, Calibrate and Convert
DOK 2 — ApplyUse the whole interval and the correct phase count.
Instructor Q1 — Matching Phase
A full cycle returns to:
Instructor Q2 — Vertical Calibration
A symmetric signal with 6 V peak-to-peak has amplitude:
Instructor Q3 — Many Cycles
Twelve complete cycles take 18.0 s. Find period.
Instructor Q4 — Fast Signal
A periodic signal has frequency 400 Hz. Find period.
4/4 — Instructor Questions Completed
Correct phase markers and calibrated axes matter as much as the arithmetic.
✎ PRACTICE — Independent Timing and Trace Audits
DOK 1–3 — PracticeChallenge 1: An Unseen Timing Record
Fifteen complete oscillations take 24.0 s. Find frequency.
Step-by-Step Solution
f = 15/24.0 = .625 Hz.
Challenge 2: Read a Calibrated Signal
An oscilloscope shows 4.8 horizontal divisions per full cycle at .50 ms/div. The symmetric signal spans 6.0 vertical divisions peak-to-peak at .80 V/div. Find period, frequency and voltage amplitude.
Step-by-Step Solution
T = 4.8×.50 ms = 2.40 ms = .00240 s; f ≈ 416.667 Hz. Peak-to-peak voltage = 6.0×.80 = 4.80 V; amplitude = 2.40 V.
Challenge 3: Audit Crossings and Timing Error
Twenty consecutive half-cycle intervals between alternating-direction equilibrium crossings take 9.60 s. The displacement range is .0800 m peak-to-peak. Total timing uncertainty for that interval is ±.20 s, and the crossing count is exact. Find period, displacement amplitude and fractional period uncertainty. A report counts twenty whole cycles, calls .0800 m the amplitude, and says timing many cycles eliminates all measurement errors. Evaluate the claims and explain a fair repeated measurement.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Twenty half cycles are ten full cycles. T = 9.60/10 = .960 s. A = .0800/2 = .0400 m. Fractional uncertainty = .20/9.60 ≈ .02083, or 2.083%. Repeat timing the same number of full same-phase cycles under the same conditions. Many-cycle timing reduces fractional fixed timing uncertainty; it does not remove all systematic error or miscounting.
☷ CHALLENGE — Separate Measurement Quantities
DOK 2 — ApplySeparate Measurement Quantities
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Correct phase markers and calibrated axes matter as much as the arithmetic.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain full-cycle timing, period and reciprocal frequency, calibrated amplitude and how many-cycle timing affects uncertainty. Distinguish amplitude from speed and qualify period-independence claims.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.12 — Measuring Oscillations
Reach the Peak of Understanding
1. Count complete cycles
T = Δt/N, f = N/Δt and Tf = 1 for a stable periodic signal. Frequency has units Hz; period has units s. Same position with opposite direction is a half-cycle marker, not a full return.
2. Measure amplitude
Amplitude is maximum displacement from equilibrium; peak-to-peak range is 2A for a symmetric signal. A voltage trace has voltage amplitude; it becomes mechanical displacement only with a stated transducer calibration.
3. Use calibrated traces
On an oscilloscope, period equals horizontal divisions per full cycle times time per division. Signal amplitude equals vertical displacement from the equilibrium line times gain per division. Use consistent prefixes, and distinguish amplitude from peak-to-peak voltage.
4. Control uncertainty and assumptions
Timing many complete cycles reduces fractional effect of a fixed total start/stop timing uncertainty: ΔT/T = Δt/t if the count is exact. Repeats help assess scatter; this does not remove systematic error, miscounting or changing period. Pendulum amplitude independence is only a small-angle approximation.
Worked independent practice
C1: .625 Hz. C2: .00240 s, about 416.667 Hz and 2.40 V. C3: .960 s, .0400 m and fractional uncertainty .02083 (about 2.083%).
Live investigation and access
Prescribed sinusoidal kinematics x = A cos(2πt/T), represented by a moving cart; no pendulum-length or spring-force model is implied. Controls set cycle time T, amplitude A and the number N of complete cycles to observe. The trial lasts NT physical seconds, played over six real seconds. Gold trace marks identify completed returns to the positive extreme. Between completed cycles, the measurement uses the time of the last matched-phase return, not the current partial-cycle clock. Before one full cycle, measured T and f are unavailable. Cart displacement scale is 3000 pixels/m; trace displacement scale is 600 pixels/m. The time axis spans the full physical trial duration. Amplitude independence of T is imposed by this kinematic model, not proven for every oscillator.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 7.1 includes oscilloscope time-base and gain measurements; A Level 17.1 includes oscillation quantities. AP Physics 1 7.2–7.3 supports period, frequency and representations. The uncertainty example assumes exact cycle counting and a stated total interval uncertainty.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I use matching phase markers.
- I distinguish half cycles from full cycles.
- I calibrate each graph axis.
- I halve symmetric peak-to-peak range.
- I state the uncertainty assumptions.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.12 Complete! · All 10 levels cleared · PHYSICS CREST
★ Measuring Oscillations Investigator
Correct phase markers and calibrated axes matter as much as the arithmetic.