Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 12.16 · Wave Energy, Power and Intensity Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

A Bigger Amplitude Needs a Controlled Comparison

A wave transfers energy; power tells how quickly, and intensity tells power per area. Comparable linear waves often have intensity proportional to an amplitude squared. State the amplitude type and what stays fixed. This rule does not turn wave height into an exact prediction of tsunami damage or make perceived loudness a direct amplitude meter.

Keep the comparison controlledSame f and mediumAmplitude type specified
Given conditions only; arrows and distances are schematic.

Model: Average intensity I is average power P divided by cross-sectional area S normal to propagation. For comparable linear waves at fixed frequency and medium, I ∝ A². Energy transferred in time Δt is PΔt. For the labelled plane-sound extension, displacement amplitude A gives I = ½ρc(2πf)²A²; pressure amplitude p₀ gives I = p₀²/(2ρc). Which amplitude is fixed matters.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Two linear wave beams have the same frequency, medium and cross-sectional area. Displacement amplitude doubles. What happens to average intensity?

Keep the comparison controlledSame f and mediumAmplitude type specified
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Longitudinal Motion and Energy Flux

DOK 2 — Investigate

Predict, measure and compare

Measure a baseline, double only displacement amplitude, then double only frequency. Compare a beam-area-only preset to separate total power from local intensity.

This labelled extension uses a linear plane sound wave in a uniform non-dispersive medium with density 1.20 kg/m³ and speed 343 m/s. Displacement is ξ = A cos(kx−ωt); material velocity is its time derivative, pressure perturbation is ρc times that velocity, and instantaneous acoustic energy flux is pressure perturbation times material velocity. Mean intensity averages that flux over a cycle. The uniform beam has cross-sectional area S; total average power is IS. A run covers .008 physical seconds over six real seconds. Dots oscillate longitudinally, with displacement enlarged to 500000 pixels/m; the moving curve is pressure, not a transverse shape of air. The horizontal spatial scale is 360 pixels over 1.372 m, pressure uses 4 pixels/Pa, and the signed material-velocity arrow uses 5000 pixels/(m/s). The intensity bar has the same 0–.320 W/m² scale for every trial. There is no absorption, spreading or reflected wave in this plane-wave model.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical time:
Wavelength:
Marked material displacement:
Marked material velocity:
Marked pressure perturbation:
Average intensity:
Average beam power:
Marked instantaneous flux:
Mean transferred energy since start:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — Square Law with Quantities and Conditions

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Energy, power and intensity

Click to flip

Energy, power and intensity

Energy E is measured in J; power P is energy transferred per time in W; average intensity I is average P/S in W/m², with S normal to propagation. For a uniform beam, energy transferred over a steady interval is E = ISΔt. Doubling beam area at fixed intensity doubles total power, not local intensity.

Rule 2

Specify the amplitude

Click to flip

Specify the amplitude

For comparable linear waves at fixed frequency and medium, intensity scales as the square of the specified amplitude. Use I₂/I₁ = (A₂/A₁)² and take a positive square root for an amplitude magnitude. The plane-sound extension gives I = ½ρcω²A² for displacement amplitude and I = p₀²/(2ρc) for pressure amplitude. Changing frequency at fixed displacement amplitude differs from changing it at fixed pressure amplitude.

Rule 3

Spreading and absorption

Click to flip

Spreading and absorption

A steady isotropic point source without absorption has I = P/(4πr²), so amplitude at fixed frequency and medium scales as 1/r. Geometric spreading reduces intensity without reducing total outward power. Absorption reduces outward wave power by transferring energy into the material; it does not destroy total energy. A non-spreading ideal plane wave does not lose amplitude merely because it travels farther.

∫

Rule 4

Limits of a simple claim

Click to flip

Limits of a simple claim

The sound displacement formula is a model-specific extension, not a universal E ∝ A²f² law. Electromagnetic intensity at fixed medium scales with electric-field amplitude squared, without this explicit mechanical f² factor. Perceived loudness differs from pressure amplitude or intensity. Actual storm or tsunami damage depends on flow, geometry and structures, so no exact square-law damage multiplier follows from wave height alone.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Doubling a wave’s amplitude always doubles its intensity.”

Myth 2: “Doubling tsunami height guarantees exactly four times the damage.”

6

✦ THE SECOND “AHA!” — Intensity and Controlled Ratios

DOK 2 — Apply

Use power per area and square-law comparisons only under the stated conditions.

Progress
0/4
Keep the comparison controlledSame f and mediumAmplitude type specified
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Amplitude Change

Same-frequency linear waves in the same medium have an amplitude ratio of 3. Their intensity ratio is:

2

Instructor Q2 — Area Change

A uniform beam keeps the same intensity while its cross-sectional area doubles. Its total power:

3

Instructor Q3 — Power per Area

A uniform beam carries average power .0240 W through area .00600 m². Find average intensity.

Power per AreaPower: .0240 WArea: .00600 m²
Given conditions only; arrows and distances are schematic.
W/m²
4

Instructor Q4 — An Intensity Ratio

Two linear waves have the same frequency and medium. Amplitude falls from .00400 m to .00100 m. Find the intensity ratio (new/old).

An Intensity RatioA: .00400 → .00100 mSame f and medium
Given conditions only; arrows and distances are schematic.
7

✎ PRACTICE — Independent Intensity and Power Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Fresh Beam

A uniform beam carries average power .000184 W through cross-sectional area .0800 m² normal to propagation. Find average intensity.

A Fresh BeamP: .000184 WS: .0800 m²
Given conditions only; arrows and distances are schematic.
W/m²
DOK 2 — Application

Challenge 2: Amplitude, Area and Time

A linear wave beam has intensity .0640 W/m² at displacement amplitude .00300 m. Keeping frequency and medium fixed, amplitude becomes .00450 m. The new uniform beam crosses .0250 m² for 8.50 s. Find its intensity and total energy transferred in that time.

Amplitude, Area and TimeA: .00300 → .00450 mOld I: .0640 W/m²S: .0250 m²; t: 8.50 s
Given conditions only; arrows and distances are schematic.
W/m²
J
DOK 3 — Audit & Justify

Challenge 3: Separate Spreading from Absorption

A steady isotropic emitter gives intensity .0160 W/m² at radius 3.00 m. At 6.00 m, uniform absorption between the two spherical surfaces leaves measured intensity .00100 W/m². Frequency and medium are unchanged. Find the intensity expected at 6.00 m with spreading alone, the fraction of total outward power remaining relative to the 3.00 m surface, and amplitude ratio at 6.00 m versus 3.00 m. A report says intensity varies as 1/r, an amplitude ratio equals the intensity ratio, absorption destroys energy, and any frequency change always multiplies light intensity by f² at fixed electric-field amplitude. Correct all four claims.

Spherical surfaces and absorptionRadius: 3.00 → 6.00 mOld I: .0160 W/m²New I: .00100 W/m²
Given conditions only; arrows and distances are schematic.
W/m²

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Classify the Wave-Energy Claim

DOK 2 — Apply

Classify the Wave-Energy Claim

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain the differences between energy, power and intensity; explain a controlled square-law comparison and distinguish spreading from absorption. State why the amplitude type and fixed conditions matter.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.