WONDER — The Mystery
Restoring, Damping and Driving Have Different Jobs
A spring stores and returns energy while its force points toward equilibrium. Viscous damping opposes velocity and transfers mechanical energy to the surroundings. A driver supplies energy. These forces can act together; a mass passing x = 0 can still have a damping force and nonzero acceleration.
Model: For a linear horizontal model, m ẍ + b ẋ + kx = F₀ cos(Ωt). Undamped natural angular frequency is ω₀ = √(k/m), critical damping is b_c = 2√(mk), and damping ratio is ζ = b/b_c. Free motion has F₀ = 0. Damped driven motion eventually follows the drive frequency after transients decay. Light damping gives a large response near the natural frequency; detailed quantitative response is labelled extension.
PREDICT — Commit to Your Answer
DOK 2 — PredictAn undriven viscously damped mass passes through x = 0 moving in the positive direction. Its spring restoring force is zero. What is the net horizontal force?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The equilibrium position is defined for rest with no drive. During passage, net force is −bv < 0, so acceleration is nonzero.
▶ PLAY — Live Free, Damped and Driven Motion
DOK 2 — InvestigatePredict, measure and compare
Measure a weakly damped free release, change only damping to critical, then return to the baseline damping and apply the driver. Explore undamped resonance, an overdamped free release and a different driving frequency.
A horizontal ideal linear spring has m = 1.00 kg and k = 16.0 N/m. Each run begins at x = +.0250 m with zero velocity and spans eight physical seconds over six real seconds. Damping ratio ζ sets b = 2ζ√(mk); ζ = 0, 1 and greater than 1 give undamped, critical and overdamped free motion. Driver switch 0 means free motion; 1 applies .100 cos(Ωt) N, where Ω/ω₀ is the frequency-ratio slider. Exact homogeneous and particular solutions include the release transient in every run; the singular undamped resonant case uses its finite-time growing solution. Position uses 1000 pixels/m and all force arrows use 45 pixels/N. The lower trace records actual displacement as time advances, alongside the moving mass. A zero driving-frequency ratio applies a constant force rather than an oscillating driver. The theoretical steady amplitude is separate from the measured transient; no finite steady amplitude is claimed at undamped resonance.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Classify the Motion and the Resonance Claim
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Different force directions
Click to flip
Different force directions
Spring restoring force −kx opposes displacement; viscous damping −bv opposes velocity. They can point in the same direction or opposite directions. At x = 0 the spring force is zero, but a moving damped mass can have net force −bv plus any applied drive. A vertical spring equilibrium is extended by mg/k, rather than its natural length.
Rule 2
Free damping regimes
Click to flip
Free damping regimes
For the linear viscous model, b_c = 2√(mk). With 0 < b < b_c, free motion oscillates with decreasing amplitude; at b = b_c a release from rest returns without overshoot, with the fastest asymptotic decay among nonoscillatory cases at fixed m and k; above b_c, return is slower. These release conditions matter: an arbitrary initial velocity can cross equilibrium even in a nonoscillatory solution. Real damping need not be linear in velocity.
Rule 3
Forced response and energy
Click to flip
Forced response and energy
After transients die out, a damped oscillator responds at the drive frequency, not necessarily its undamped natural frequency. At steady periodic motion, average energy supplied by the drive equals average energy transferred through damping. Instantaneous mechanical energy can still vary. In free motion, dE/dt = −bv²; damping transfers energy rather than destroying it.
Rule 4
Resonance and the labelled extension
Click to flip
Resonance and the labelled extension
Small damping makes the response peak tall and narrow near ω₀. For fixed sinusoidal force amplitude, steady displacement amplitude is F₀/√[(k−mΩ²)²+(bΩ)²]. Its nonzero maximum lies at Ω = √(k/m−b²/(2m²)) when ζ < 1/√2; heavier damping has no nonzero displacement peak. This follows by minimizing the squared denominator, and is more precise than saying every peak is exactly at ω₀. Ideal undamped resonant amplitude grows with time, rather than becoming infinite instantly.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “At x = 0 a damped oscillator always has zero net force.”
Correct — the claim is false.
False. A moving mass still has −bv and may have an external drive. The spring restoring term alone vanishes at x = 0.
Myth 2: “Resonance always gives an infinite amplitude immediately, regardless of damping.”
Correct — the claim is false.
False. Damping limits the steady response. In the ideal undamped resonant model, displacement grows over time but is finite at every finite time.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Signs, Natural Frequency and Critical Damping
DOK 2 — ApplyThe net force and the spring restoring term are different quantities.
Instructor Q1 — Opposing Motion
A mass has x > 0 and v < 0. Its spring force and viscous damping force point:
Instructor Q2 — Driven Steady Motion
After damped transients die away, the oscillation frequency equals:
Instructor Q3 — Damping Force
A viscous coefficient is .750 N·s/m and velocity is +.200 m/s. Find signed damping force.
Instructor Q4 — Critical Coefficient
A linear oscillator has m = .500 kg and k = 8.00 N/m. Find the critical viscous coefficient.
4/4 — Instructor Questions Completed
Classify free decay separately from driven response, and distinguish a finite-time transient from a steady resonance curve.
✎ PRACTICE — Independent Damping and Resonance Audit
DOK 1–3 — PracticeChallenge 1: A Fresh Signed Force
A linear viscous damper has coefficient .460 N·s/m. A mass moves at velocity +.00500 m/s. Find its signed damping force.
Step-by-Step Solution
F_d = −bv = −.460×.00500 = −.00230 N.
Challenge 2: Identify the Damping Ratio
An oscillator has m = .400 kg, k = 10.0 N/m and viscous coefficient .800 N·s/m. Find the critical coefficient and its damping ratio b/b_c.
Step-by-Step Solution
b_c = 2√(.400×10.0) = 4.00 N·s/m and ζ = .800/4.00 = .200. The free-motion regime is underdamped.
Challenge 3: Audit a Driven Motion Report
A .300 kg mass on a 12.0 N/m horizontal spring has viscous coefficient .600 N·s/m. At one instant x = 0, velocity is +.400 m/s and applied drive is +.150 N. Find signed acceleration and instantaneous rate of change of mechanical energy. A report says spring force zero means net force zero, damped steady motion always uses the natural frequency, constant driven amplitude means no energy is supplied, and all displacement-response peaks are exactly at the natural frequency. Correct all four claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Spring force = 0; damping force = −.240 N; net force = −.0900 N, so a = −.300 m/s². dE/dt = F_drive v−bv² = .0600−.0960 = −.0360 W. Damped steady motion follows the drive; average input replaces dissipated energy even at constant amplitude. For this fixed-force model, ω₀ = √40 = 6.32456 rad/s but displacement peak is √38 = 6.16441 rad/s, slightly lower. The precise peak formula is labelled extension; the key qualitative point is near-natural resonance at light damping.
☷ CHALLENGE — Match the Motion Claim
DOK 2 — ApplyMatch the Motion Claim
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Classify free decay separately from driven response, and distinguish a finite-time transient from a steady resonance curve.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain restoring force, damping and forcing with their directions and energy roles. Distinguish free damping regimes from driven steady response, and describe what damping does to a resonance curve.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.17 — Damping, Forced Motion and Resonance
Reach the Peak of Understanding
1. Different force directions
Spring restoring force −kx opposes displacement; viscous damping −bv opposes velocity. They can point in the same direction or opposite directions. At x = 0 the spring force is zero, but a moving damped mass can have net force −bv plus any applied drive. A vertical spring equilibrium is extended by mg/k, rather than its natural length.
2. Free damping regimes
For the linear viscous model, b_c = 2√(mk). With 0 < b < b_c, free motion oscillates with decreasing amplitude; at b = b_c a release from rest returns without overshoot, with the fastest asymptotic decay among nonoscillatory cases at fixed m and k; above b_c, return is slower. These release conditions matter: an arbitrary initial velocity can cross equilibrium even in a nonoscillatory solution. Real damping need not be linear in velocity.
3. Forced response and energy
After transients die out, a damped oscillator responds at the drive frequency, not necessarily its undamped natural frequency. At steady periodic motion, average energy supplied by the drive equals average energy transferred through damping. Instantaneous mechanical energy can still vary. In free motion, dE/dt = −bv²; damping transfers energy rather than destroying it.
4. Resonance and the labelled extension
Small damping makes the response peak tall and narrow near ω₀. For fixed sinusoidal force amplitude, steady displacement amplitude is F₀/√[(k−mΩ²)²+(bΩ)²]. Its nonzero maximum lies at Ω = √(k/m−b²/(2m²)) when ζ < 1/√2; heavier damping has no nonzero displacement peak. This follows by minimizing the squared denominator, and is more precise than saying every peak is exactly at ω₀. Ideal undamped resonant amplitude grows with time, rather than becoming infinite instantly.
Worked independent practice
C1: −.00230 N. C2: critical coefficient 4.00 N·s/m, ratio .200 (underdamped). C3: −.300 m/s² and −.0360 W, with net force −.0900 N. A driven steady cycle still requires energy input.
Live investigation and access
A horizontal ideal linear spring has m = 1.00 kg and k = 16.0 N/m. Each run begins at x = +.0250 m with zero velocity and spans eight physical seconds over six real seconds. Damping ratio ζ sets b = 2ζ√(mk); ζ = 0, 1 and greater than 1 give undamped, critical and overdamped free motion. Driver switch 0 means free motion; 1 applies .100 cos(Ωt) N, where Ω/ω₀ is the frequency-ratio slider. Exact homogeneous and particular solutions include the release transient in every run; the singular undamped resonant case uses its finite-time growing solution. Position uses 1000 pixels/m and all force arrows use 45 pixels/N. The lower trace records actual displacement as time advances, alongside the moving mass. A zero driving-frequency ratio applies a constant force rather than an oscillating driver. The theoretical steady amplitude is separate from the measured transient; no finite steady amplitude is claimed at undamped resonance.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
A Level 9702 17.3 requires qualitative damped/forced oscillations and resonance. Quantitative viscous regimes, analytic transients and response formulas here are labelled extension. They are checked using the force equation and energy balance, with the steady-response denominator also verified against Richard Fitzpatrick, University of Texas at Austin, Driven Damped Harmonic Oscillation (https://farside.ph.utexas.edu/teaching/315/Waveshtml/node15.html). The exact displacement peak is independently derived from that denominator; no claim is made that a qualitative resonance approximation is exact.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I sum every force, including at x = 0.
- I compare damping with the critical coefficient.
- I distinguish free motion from forced steady motion.
- I balance energy over a driven steady cycle.
- I state near-natural resonance and label quantitative extensions.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.17 Complete! · All 10 levels cleared · PHYSICS CREST
★ Damping, Forced Motion and Resonance Investigator
Classify free decay separately from driven response, and distinguish a finite-time transient from a steady resonance curve.