WONDER — The Mystery
Compare Motion With Propagation
A string point can move across the direction of propagation, while an air parcel in an ordinary sound wave moves along it. Surface water motion can combine horizontal and vertical components. “Surface” describes where a wave is concentrated; it is not a third mutually exclusive direction category that every wave must fit.
Model: Transverse means displacement perpendicular to propagation; longitudinal means displacement parallel to propagation. Ordinary sound in air is longitudinal. Bulk elastic waves in solids can include longitudinal and transverse modes. Freely propagating electromagnetic waves in vacuum are transverse fields, not material particles. Surface-wave particle paths depend on the wave and depth.
PREDICT — Commit to Your Answer
DOK 2 — PredictA wave propagates horizontally right along a string. Its points vibrate vertically. How is this displacement classified?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Classification compares the two directions. The string displacement is transverse regardless of which way the wave travels along the string.
▶ PLAY — Live Transverse, Longitudinal and Mixed Motion
DOK 2 — InvestigatePredict, measure and compare
Compare baseline and doubled amplitude, then baseline and doubled frequency. Watch the red labelled particles and the travelling compression pattern. Inspect the closed mixed-motion orbit separately.
Three prescribed small-displacement travelling patterns share phase φ = 2π(X/λ − ft), with X the equilibrium horizontal coordinate. Transverse: Δx = 0, Δy = A sinφ. Longitudinal: Δx = A sinφ, Δy = 0. Mixed illustration: Δx = −A sinφ, Δy = A cosφ. The mixed pattern demonstrates two components and a first-order closed circular orbit; it is not a gravity-wave dispersion or fluid-drift solver. Real water paths can be elliptical and can drift. Longitudinal density relative to equilibrium is 1/(1+kA cosφ), k = 2π/λ; compressions follow the minimum positive spacing factor. A is limited so particles never cross. A run is two physical periods, played over 6 real seconds. The displayed 6 m span has 60 pixels/m horizontally; longitudinal displacement uses that same horizontal scale. Transverse and mixed-orbit displacement are enlarged to 300 pixels/m. λ and f specify a new pattern with speed fλ in each run.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Directions and Scope
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Transverse displacement
Click to flip
Transverse displacement
The displacement axis is perpendicular to wave propagation. A transverse mechanical wave involves moving matter, whereas a vacuum electromagnetic wave involves transverse electric and magnetic fields.
Rule 2
Longitudinal displacement
Click to flip
Longitudinal displacement
The displacement axis is parallel to propagation. The instantaneous particle velocity can point forward or backward. Ordinary sound in air produces travelling pressure and density changes; particles do not travel across the room with a compression.
Rule 3
Surface is a different description
Click to flip
Surface is a different description
Surface waves occur at an interface and can have mixed motion. Small deep-water surface gravity waves have approximately circular first-order particle paths; finite-depth paths can be elliptical. Circular motion alone does not prove a wave must be a surface wave.
Rule 4
Read the plotted quantity
Click to flip
Read the plotted quantity
A sinusoidal graph of air displacement or pressure does not mean air parcels move vertically. The vertical plotting axis represents the labelled quantity. A longitudinal wave can therefore be drawn as a sine graph without becoming transverse.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Any sine-shaped graph represents a transverse wave.”
Correct — the claim is false.
False. A pressure-versus-position graph of sound can be sinusoidal while air displacement is longitudinal.
Myth 2: “A closed circular particle path automatically creates forward drift.”
Correct — the claim is false.
False. A closed path returns to its starting position. Real fluid drift involves effects beyond that first-order closed-orbit model; surface paths are not universally circular.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Axes and Local Measurements
DOK 2 — ApplyUse the actual vibration axis and distinguish particle displacement from pressure graphs.
Instructor Q1 — Sound Graph
A sinusoidal pressure graph for sound in air is evidence of:
Instructor Q2 — Mixed Motion
Which is the most careful statement about surface water motion?
Instructor Q3 — Perpendicular Axes
A propagation axis is horizontal and a vibration axis is vertical. Find the smaller angle between those axes.
Instructor Q4 — A Complete Local Cycle
A longitudinal particle starts at +.012 m displacement, moves to −.012 m, then returns to +.012 m. Each leg is monotonic. Find its total travelled distance.
4/4 — Instructor Questions Completed
Classify the displacement direction, not the shape of a graph or the direction in which energy travels.
✎ PRACTICE — Independent Motion Classification
DOK 1–3 — PracticeChallenge 1: An Along-Axis Wave
A wave propagates along a straight horizontal line. Each particle vibrates along that same line. Find the smaller angle between the vibration axis and propagation axis.
Step-by-Step Solution
The axes are parallel, so their smaller angle is 0°. The displacement is longitudinal.
Challenge 2: Local Motion Is Not the Crest
An ideal transverse string point moves monotonically from +.015 m to −.015 m and back to +.015 m in .40 s. Find its total distance travelled and the frequency of this repeating motion.
Step-by-Step Solution
Each monotonic leg is .030 m, so total distance is .060 m. Frequency = 1/.40 = 2.5 Hz.
Challenge 3: Audit a Particle Track
A wave travels right. A tracked particle’s displacement is Δx = .020 sin(4πt) m, Δy = 0, with t in seconds. Find its displacement amplitude and frequency. A report calls it transverse because its displacement graph is a sine curve, says light needs the same particle medium, and says all surface waves have perfectly closed circular paths that cause net drift. Correct all three claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Amplitude is .020 m; angular frequency is 4π rad/s, so f = 2 Hz. Motion is longitudinal because Δx is along rightward propagation. A sine graph alone does not determine direction. Freely propagating light needs no material medium. Surface paths depend on conditions and can be elliptical; a closed orbit has zero net displacement, so the closed circle alone cannot cause drift.
☷ CHALLENGE — Direction, Field or Surface Condition
DOK 2 — ApplyDirection, Field or Surface Condition
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Classify the displacement direction, not the shape of a graph or the direction in which energy travels.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain transverse and longitudinal motion using a string and sound in air. Explain why a sine graph is not a direction test, why light needs no material medium and how mixed surface motion differs from a universal circular-orbit claim.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.2 — Transverse and Longitudinal Waves
Reach the Peak of Understanding
1. Transverse displacement
The displacement axis is perpendicular to wave propagation. A transverse mechanical wave involves moving matter, whereas a vacuum electromagnetic wave involves transverse electric and magnetic fields.
2. Longitudinal displacement
The displacement axis is parallel to propagation. The instantaneous particle velocity can point forward or backward. Ordinary sound in air produces travelling pressure and density changes; particles do not travel across the room with a compression.
3. Surface is a different description
Surface waves occur at an interface and can have mixed motion. Small deep-water surface gravity waves have approximately circular first-order particle paths; finite-depth paths can be elliptical. Circular motion alone does not prove a wave must be a surface wave.
4. Read the plotted quantity
A sinusoidal graph of air displacement or pressure does not mean air parcels move vertically. The vertical plotting axis represents the labelled quantity. A longitudinal wave can therefore be drawn as a sine graph without becoming transverse.
5. Compression markers must move
For longitudinal ξ = A sin(kX−ωt), spacing factor is 1+kA cosφ. Compression is greatest near cosφ = −1 and travels with the pattern. Fixed labels on static screen positions would misrepresent the moving compression.
6. Media support different modes
Bulk liquids and gases support ordinary pressure waves but not bulk elastic shear waves. Solids can support substantial longitudinal and transverse elastic waves. These are medium constraints, not a rule that any wave in a named material has one possible motion.
Worked independent practice
C1: 0°. C2: .060 m and 2.5 Hz. C3: .020 m and 2.0 Hz; the tracked displacement is longitudinal.
Live investigation and access
Three prescribed small-displacement travelling patterns share phase φ = 2π(X/λ − ft), with X the equilibrium horizontal coordinate. Transverse: Δx = 0, Δy = A sinφ. Longitudinal: Δx = A sinφ, Δy = 0. Mixed illustration: Δx = −A sinφ, Δy = A cosφ. The mixed pattern demonstrates two components and a first-order closed circular orbit; it is not a gravity-wave dispersion or fluid-drift solver. Real water paths can be elliptical and can drift. Longitudinal density relative to equilibrium is 1/(1+kA cosφ), k = 2π/λ; compressions follow the minimum positive spacing factor. A is limited so particles never cross. A run is two physical periods, played over 6 real seconds. The displayed 6 m span has 60 pixels/m horizontally; longitudinal displacement uses that same horizontal scale. Transverse and mixed-orbit displacement are enlarged to 300 pixels/m. λ and f specify a new pattern with speed fλ in each run.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 9702 7.2 and AP Physics 2 14.1 cover the transverse/longitudinal distinction. The mixed surface-pattern illustration and density Jacobian are declared enrichment; no universal third direction category is claimed. AP Physics 1 uses this as supporting wave groundwork.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I compare displacement with propagation.
- I read graph-axis labels.
- I distinguish vacuum fields from medium particles.
- I qualify surface-wave orbit models.
- I do not infer drift from a closed circle.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ Transverse and Longitudinal Waves Investigator
Classify the displacement direction, not the shape of a graph or the direction in which energy travels.