WONDER — The Mystery
Measure Space and Time Separately
A snapshot reveals spatial structure and maximum displacement. Watching one fixed point over time reveals period and frequency. Those measurements describe different quantities, but they are linked: fT = 1, and a periodic travelling wave has v = fλ. A fixed linear medium does not let wavelength and frequency vary independently at fixed speed.
Model: A small sinusoidal transverse wave travels on a uniform string. Amplitude is maximum displacement from equilibrium, wavelength is the smallest repeat distance for equal phase, period is one complete repeat time, and frequency is cycles per second. The linear medium speed is fixed within each trial; changing the speed control selects a different medium condition.
PREDICT — Commit to Your Answer
DOK 2 — PredictThe source frequency doubles while a uniform linear medium keeps the same wave speed. What happens to wavelength and period?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Doubling f halves both λ at fixed v and the period. Amplitude is a separate displacement measure in this linear model.
▶ PLAY — Live Wave Measurements at Fixed Medium Speed
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, double only amplitude, then double only source frequency. Follow local point motion and the travelling crest-to-crest bracket. Compare physical period and wavelength.
Ideal right-moving linear wave y = A cos(kx−ωt), with ω = 2πf, λ = v/f and k = 2π/λ. Controls set amplitude, source frequency and a medium speed that remains fixed during a trial. The red string point stays at x = 4 m and has transverse velocity ∂y/∂t = Aω sin(kx−ωt). A run spans three physical periods and plays over 6 real seconds. Horizontal scale is 45 pixels/m; vertical displacement is enlarged to 800 pixels/m. Wavelength markers follow actual moving crests. At A = 0 there is no displacement disturbance; source frequency and nominal medium spacing remain assigned model settings.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Four Quantities, Explicit Links
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Amplitude and plotted units
Click to flip
Amplitude and plotted units
Displacement amplitude is maximum distance from equilibrium, in metres. Crest-to-trough distance of a symmetric sinusoid is 2A. A sound-pressure amplitude is instead measured in pascals; the plotted variable determines the units.
Rule 2
Wavelength and phase
Click to flip
Wavelength and phase
Wavelength is the smallest spatial repeat between points in the same phase, such as consecutive crests. The span from the first of six consecutive crests to the sixth contains five wavelengths.
Rule 3
Frequency and period
Click to flip
Frequency and period
Frequency is complete cycles per second in Hz; period is seconds per cycle. Always fT = 1 for a periodic signal. Count intervals between repeats rather than counting an endpoint twice.
Rule 4
Speed and comparison conditions
Click to flip
Speed and comparison conditions
For a periodic travelling pattern, v = fλ. At fixed linear-medium speed, raising f lowers λ. In a linear fixed-medium model, changing amplitude alone does not alter f, λ or v. Amplitude-squared intensity comparisons require other relevant wave and medium conditions to match.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Frequency and period can both be chosen independently for the same periodic wave.”
Correct — the claim is false.
False. They are reciprocals. Specifying one specifies the other.
Myth 2: “Doubling any wave amplitude guarantees exactly four times the real destruction.”
Correct — the claim is false.
False. The square-law relation concerns comparable linear-wave energy or intensity under fixed relevant conditions. Actual damage depends on many properties and interactions; it is not a universal destruction law.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Read Heights, Repeats and Intervals
DOK 2 — ApplyA graph’s axis labels and the number of complete intervals matter.
Instructor Q1 — A Peak-to-Peak Trace
A sinusoidal displacement trace runs from −A to +A. Its peak-to-peak displacement is:
Instructor Q2 — A Fixed Medium
Raise source frequency without changing the linear medium. Wavelength:
Instructor Q3 — Displacement Amplitude
A symmetric sinusoidal displacement has peak-to-peak span .044 m. Find its amplitude.
Instructor Q4 — Frequency From Cycles
A fixed point completes 30 full cycles in 2.5 s. Find frequency.
4/4 — Instructor Questions Completed
State what is held fixed before deciding which wave properties can change independently.
✎ PRACTICE — Independent Wave-Property Measurements
DOK 1–3 — PracticeChallenge 1: A New Period
A periodic wave has frequency 8.0 Hz. Find its period.
Step-by-Step Solution
T = 1/8.0 = .125 s.
Challenge 2: Interpret Two Observations
A displacement trace has extrema +.028 m and −.028 m about zero equilibrium. A fixed point completes 12 full cycles in 3.0 s. A simultaneous spatial image shows six consecutive crests spanning 2.5 m from first to last. Find amplitude, frequency, period and wavelength.
Step-by-Step Solution
A = .028 m; f = 12/3.0 = 4.0 Hz; T = .25 s. Six consecutive crests contain five wavelengths, so λ = 2.5/5 = .50 m.
Challenge 3: Audit a Source Change
A uniform linear medium has speed 2.4 m/s. The source frequency changes from 3.0 Hz to 6.0 Hz. Its new displacement extrema are +.012 m and −.012 m about zero equilibrium. Find the new amplitude, wavelength and period. A report says period increases with frequency, wavelength is unchanged because all properties are independent, and the amplitude is the full peak-to-peak span. Correct all three claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
A = .012 m. New λ = 2.4/6.0 = .40 m; T = 1/6.0 ≈ .1667 s. Period halves as frequency doubles. Wavelength halves at fixed speed. The peak-to-peak span is .024 m, twice the amplitude.
☷ CHALLENGE — Match Measurements With Quantities
DOK 2 — ApplyMatch Measurements With Quantities
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
State what is held fixed before deciding which wave properties can change independently.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain amplitude, wavelength, frequency and period using the correct measurements and units. Describe the two mandatory links and what changes when a source frequency changes in a fixed linear medium.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.3 — Wave Properties
Reach the Peak of Understanding
1. Amplitude and plotted units
Displacement amplitude is maximum distance from equilibrium, in metres. Crest-to-trough distance of a symmetric sinusoid is 2A. A sound-pressure amplitude is instead measured in pascals; the plotted variable determines the units.
2. Wavelength and phase
Wavelength is the smallest spatial repeat between points in the same phase, such as consecutive crests. The span from the first of six consecutive crests to the sixth contains five wavelengths.
3. Frequency and period
Frequency is complete cycles per second in Hz; period is seconds per cycle. Always fT = 1 for a periodic signal. Count intervals between repeats rather than counting an endpoint twice.
4. Speed and comparison conditions
For a periodic travelling pattern, v = fλ. At fixed linear-medium speed, raising f lowers λ. In a linear fixed-medium model, changing amplitude alone does not alter f, λ or v. Amplitude-squared intensity comparisons require other relevant wave and medium conditions to match.
5. Comparable intensity
For a specified linear wave, intensity is proportional to the square of the relevant amplitude when medium, frequency and other relevant conditions are fixed. For a string, mean power also contains frequency squared and medium parameters. Different frequencies are not automatically an amplitude-only comparison.
6. Snapshot versus trace
A spatial snapshot y(x) gives wavelength, not period by itself. A fixed-point trace y(t) gives period, not wavelength by itself. If speed is known, the two representations can be connected.
Worked independent practice
C1: .125 s. C2: .028 m, 4.0 Hz, .25 s and .50 m. C3: .012 m, .40 m and .1667 s.
Live investigation and access
Ideal right-moving linear wave y = A cos(kx−ωt), with ω = 2πf, λ = v/f and k = 2π/λ. Controls set amplitude, source frequency and a medium speed that remains fixed during a trial. The red string point stays at x = 4 m and has transverse velocity ∂y/∂t = Aω sin(kx−ωt). A run spans three physical periods and plays over 6 real seconds. Horizontal scale is 45 pixels/m; vertical displacement is enlarged to 800 pixels/m. Wavelength markers follow actual moving crests. At A = 0 there is no displacement disturbance; source frequency and nominal medium spacing remain assigned model settings.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 9702 7.1 and AP Physics 2 14.2 cover periodic-wave quantities and their relationships. The analytic local-velocity model is supporting enrichment. Travelling-wave scope is not claimed as an extra required AP Physics 1 oscillation topic.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I measure amplitude from equilibrium.
- I count gaps between crests.
- I use fT = 1.
- I use v = fλ with declared fixed conditions.
- I qualify amplitude-squared and damage claims.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.3 Complete! · All 10 levels cleared · PHYSICS CREST
★ Wave Properties Investigator
State what is held fixed before deciding which wave properties can change independently.