WONDER — The Mystery
One Repeat Distance in One Repeat Time
A crest advances one wavelength in one period. Dividing that distance by the time gives v = λ/T = fλ. This relation links a periodic pattern’s phase speed, frequency and wavelength. It does not mean that increasing source frequency must make a fixed non-dispersive string wave travel faster.
Model: For a periodic travelling wave, phase speed is v = fλ. In a fixed non-dispersive medium, speed remains the same and wavelength adjusts when source frequency changes. Dispersive waves can have frequency-dependent phase speed even in unchanged material; a wave packet’s group speed is a separate concept. Those distinctions are enrichment, not an added required formula here.
PREDICT — Commit to Your Answer
DOK 2 — PredictA periodic wave has frequency 2.5 Hz and wavelength 1.2 m. What is its phase speed?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
v = fλ = 2.5×1.2 = 3.0 m/s. Hz times m gives m/s.
▶ PLAY — Live Wave-Equation Patterns
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, change only f, then change only λ. These independent pattern settings change the required phase speed. Also compare the two presets with equal speed to see inverse f–λ changes.
Ideal right-moving pattern y = A cos[2π(x/λ−ft)]. Controls specify f, λ and A, so the required phase speed is their product fλ in each run. Different products represent different medium conditions, not frequency changes in one fixed non-dispersive medium. The equal-speed presets use f = 2 Hz, λ = 2 m and f = 4 Hz, λ = 1 m; both give 4 m/s. Each trial lasts 2 physical seconds, played over 6 real seconds with the same time scale for all settings. The red point stays at x = 4 m. Horizontal scale is 45 pixels/m; displacement is enlarged to 800 pixels/m. Zero amplitude has no displacement disturbance.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Relation, Units and Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Derive the relation
Click to flip
Derive the relation
A periodic travelling crest moves λ during one period T. Therefore v = λ/T = fλ. Rearranging gives λ = v/f and f = v/λ. A single pulse need not have a unique wavelength or frequency.
Rule 2
Check dimensions
Click to flip
Check dimensions
Frequency has units Hz = s⁻¹, wavelength has units m and phase speed has units m/s. Convert kHz or MHz and cm or mm consistently before substituting. Adding f and λ is dimensionally invalid.
Rule 3
Hold the medium condition fixed
Click to flip
Hold the medium condition fixed
In a fixed non-dispersive medium, v stays fixed while f and λ change inversely. If both f and λ are independently changed so their product changes, that is not a comparison at fixed phase speed.
Rule 4
Qualify universal claims
Click to flip
Qualify universal claims
v = fλ refers to periodic phase propagation. The statement “speed never depends on frequency in unchanged material” needs a non-dispersive approximation. Broad pulses and wave packets can contain many periodic components and need more than one λ and f.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Adding frequency to wavelength gives a wave speed.”
Correct — the claim is false.
False. The units differ, so that sum cannot be speed. Multiplication gives Hz·m = m/s.
Myth 2: “The same material guarantees the same phase speed for every possible frequency and wave type.”
Correct — the claim is false.
False. Frequency-independent speed is the non-dispersive model. Real dispersive wave systems can have different phase speeds at different frequencies.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Products and Fixed-Speed Reasoning
DOK 2 — ApplyEvery comparison states what is held fixed.
Instructor Q1 — Independent Pattern Data
Two periodic patterns have equal λ but the second has twice f. Their phase speeds:
Instructor Q2 — Correct Units
Frequency times wavelength has units:
Instructor Q3 — Phase Speed
A periodic pattern has f = 3.0 Hz and λ = .60 m. Find phase speed.
Instructor Q4 — Wavelength
Sound is modelled as non-dispersive with speed 330 m/s and frequency 660 Hz. Find wavelength.
4/4 — Instructor Questions Completed
Separate an algebraic pattern comparison from a frequency change in a fixed non-dispersive medium.
✎ PRACTICE — Independent Wave-Equation Audits
DOK 1–3 — PracticeChallenge 1: A New Pattern Speed
A periodic travelling wave has frequency 7.5 Hz and wavelength .32 m. Find its phase speed.
Step-by-Step Solution
v = fλ = 7.5×.32 = 2.4 m/s.
Challenge 2: Convert and Connect
A uniform non-dispersive medium has wave speed 325 m/s. Its source frequency is 1.25 kHz. Find wavelength and period.
Step-by-Step Solution
f = 1250 Hz. Wavelength = 325/1250 = .260 m. Period = 1/1250 = .000800 s, or .800 ms.
Challenge 3: Audit a Fixed-Medium Claim
A source in an unchanged non-dispersive medium changes frequency from 200 Hz to 500 Hz. The medium speed is 350 m/s. Find the new wavelength and period. A report keeps the old wavelength and claims the new speed is 875 m/s, calls the new period 500 s, and says this proves every wave in unchanged material has frequency-independent speed. Correct all three claims and state the relevant model condition.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
New λ = 350/500 = .700 m; T = 1/500 = .00200 s. The old λ was 350/200 = 1.75 m, which cannot remain unchanged at fixed v when f changes. Speed stays 350 m/s here. Period is reciprocal to frequency. Frequency-independent speed is the non-dispersive assumption, not a proof about every material or wave.
☷ CHALLENGE — Relations and Comparison Conditions
DOK 2 — ApplyRelations and Comparison Conditions
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Separate an algebraic pattern comparison from a frequency change in a fixed non-dispersive medium.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Derive v = fλ from one wavelength in one period. Explain why source frequency and wavelength trade inversely in a fixed non-dispersive medium, how to convert units and why the fixed-speed model should not be universalized.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.4 — The Wave Equation
Reach the Peak of Understanding
1. Derive the relation
A periodic travelling crest moves λ during one period T. Therefore v = λ/T = fλ. Rearranging gives λ = v/f and f = v/λ. A single pulse need not have a unique wavelength or frequency.
2. Check dimensions
Frequency has units Hz = s⁻¹, wavelength has units m and phase speed has units m/s. Convert kHz or MHz and cm or mm consistently before substituting. Adding f and λ is dimensionally invalid.
3. Hold the medium condition fixed
In a fixed non-dispersive medium, v stays fixed while f and λ change inversely. If both f and λ are independently changed so their product changes, that is not a comparison at fixed phase speed.
4. Qualify universal claims
v = fλ refers to periodic phase propagation. The statement “speed never depends on frequency in unchanged material” needs a non-dispersive approximation. Broad pulses and wave packets can contain many periodic components and need more than one λ and f.
5. Source frequency at a stationary boundary
For steady linear transmission across a stationary boundary, the temporal frequency stays set by the source. A changed phase speed changes wavelength; it does not automatically change the source oscillation rate.
6. Applied estimates
Wave speeds in air, water, solids or optical materials require stated conditions and are not exact universal values. A radio wavelength is not automatically a vehicle antenna’s physical length; common antenna designs can use fractions of a wavelength and additional loading.
Worked independent practice
C1: 2.4 m/s. C2: .260 m and .000800 s. C3: .700 m and .00200 s; speed remains 350 m/s in the stated model.
Live investigation and access
Ideal right-moving pattern y = A cos[2π(x/λ−ft)]. Controls specify f, λ and A, so the required phase speed is their product fλ in each run. Different products represent different medium conditions, not frequency changes in one fixed non-dispersive medium. The equal-speed presets use f = 2 Hz, λ = 2 m and f = 4 Hz, λ = 1 m; both give 4 m/s. Each trial lasts 2 physical seconds, played over 6 real seconds with the same time scale for all settings. The red point stays at x = 4 m. Horizontal scale is 45 pixels/m; displacement is enlarged to 800 pixels/m. Zero amplitude has no displacement disturbance.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 9702 7.1 explicitly requires derivation and use of v = fλ; AP Physics 2 14.2 covers periodic-wave relationships. Phase/group-speed and dispersion qualifications are explanatory enrichment. The simulator is an independent-pattern calculator, with equal-speed comparisons explicitly supplied.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I derive the product using distance/time.
- I convert prefixes consistently.
- I keep fixed-medium assumptions explicit.
- I distinguish phase speed from a packet’s group speed.
- I do not assign one λ to every arbitrary pulse.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.4 Complete! · All 10 levels cleared · PHYSICS CREST
★ The Wave Equation Investigator
Separate an algebraic pattern comparison from a frequency change in a fixed non-dispersive medium.