WONDER — The Mystery
Tightening and Shaking Are Different Changes
A small transverse disturbance on a uniform taut string travels at a speed set by tension and mass per unit length. Shaking faster changes the repeat spacing. Tightening the string changes the propagation speed. Those are different controlled investigations.
Model: For small transverse waves on an ideal uniform taut string, v = √(Fₜ/μ), where μ = mass/length. This model neglects bending stiffness, damping, tension changes during motion and dispersion. At fixed Fₜ and μ, speed is independent of source frequency and small amplitude, with λ = v/f. These conclusions are conditional, not universal claims about ocean waves or shocks.
PREDICT — Commit to Your Answer
DOK 2 — PredictOn the same ideal taut string, tension and mass per length are unchanged while source frequency doubles. What happens?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
v = √(Fₜ/μ) is unchanged. Therefore λ = v/f halves.
▶ PLAY — Live Taut-String Investigation
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, quadruple only tension, then double only source frequency. Use a fourth preset to quadruple mass per length. Compare speed and wavelength separately.
An ideal right-moving string pattern has v = √(Fₜ/μ) and λ = v/f. Displacement amplitude is .020 m. Each run covers three physical periods, played over six real seconds; the displayed duration changes when frequency changes. Horizontal scale is 45 pixels/m and vertical displacement is enlarged to 800 pixels/m. The red material point stays at x = 4 m. Positive tension and density avoid singular or slack-string cases outside this model.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Medium Model and Square-Root Scaling
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
String speed
Click to flip
String speed
v = √(Fₜ/μ), with tension Fₜ in N and μ in kg/m. Use μ = m/L for a uniform string. Do not confuse tension Fₜ with period T.
Rule 2
Controlled scaling
Click to flip
Controlled scaling
At fixed μ, quadrupling tension doubles speed; doubling tension gives √2 times speed. At fixed tension, quadrupling μ halves speed. Changing both variables can cancel.
Rule 3
Frequency comparison
Click to flip
Frequency comparison
At fixed tension and μ, changing source frequency does not change speed in this linear non-dispersive model. Wavelength adjusts inversely. Small-amplitude independence is also a model condition.
Rule 4
Limits and different media
Click to flip
Limits and different media
Actual propagation can depend on wave type, stiffness, temperature, frequency and amplitude. Dispersion or nonlinear waves require qualifications. Sound speeds are approximate and condition-dependent; density alone does not rank every material’s sound speed.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Quadrupling both tension and mass per length must quadruple speed.”
Correct — the claim is false.
False. The ratio Fₜ/μ stays fixed, so its square root and the wave speed stay fixed.
Myth 2: “Doubling source frequency doubles speed on the unchanged ideal taut string.”
Correct — the claim is false.
False. Speed stays fixed; wavelength halves in the stated model.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Ratios, Roots and Controlled Changes
DOK 2 — ApplyState which variable stays fixed.
Instructor Q1 — Tension Scaling
At fixed μ, doubling tension makes speed:
Instructor Q2 — Density Scaling
At fixed tension, quadrupling μ makes speed:
Instructor Q3 — New Speed
An ideal string has tension 9 N and μ = .25 kg/m. Find wave speed.
Instructor Q4 — New Repeat Spacing
A string wave has speed 12 m/s and frequency 6 Hz. Find wavelength.
4/4 — Instructor Questions Completed
A change in source frequency is different from a change in medium properties.
✎ PRACTICE — Independent String-Speed Evidence
DOK 1–3 — PracticeChallenge 1: An Unseen String
A uniform ideal taut string has tension 18 N and mass per length .080 kg/m. Find its small-wave speed.
Step-by-Step Solution
v = √(18/.080) = 15.0 m/s.
Challenge 2: Measure the String First
A uniform 3.00 m string has mass .090 kg and tension 12.0 N. Its source frequency is 25.0 Hz. Find mass per length, propagation speed and wavelength.
Step-by-Step Solution
μ = .090/3.00 = .0300 kg/m; v = √(12/.0300) = 20.0 m/s; λ = 20/25 = .800 m.
Challenge 3: Audit a Confounded Experiment
Run A uses tension 25 N, μ = .25 kg/m and frequency 4 Hz. Run B uses tension 100 N, μ = 1.00 kg/m and frequency 10 Hz. Find run B speed and wavelength. A report says tension alone has doubled speed, keeps run A wavelength, and calls this a controlled test of tension. Evaluate all three claims and propose a fair comparison.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Run B speed = √(100/1.00) = 10.0 m/s, equal to run A. Both tension and μ quadrupled, cancelling in their ratio. New λ = 10/10 = 1.00 m, not run A’s 2.50 m. A controlled tension comparison keeps density and source frequency fixed while changing tension alone.
☷ CHALLENGE — Classify the Comparison
DOK 2 — ApplyClassify the Comparison
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
A change in source frequency is different from a change in medium properties.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain how tension and mass per length set speed in the ideal string model. Distinguish changing the source from changing medium conditions, describe square-root scaling and state the model limits.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.6 — Wave Speed and Medium Conditions
Reach the Peak of Understanding
1. String speed
v = √(Fₜ/μ), with tension Fₜ in N and μ in kg/m. Use μ = m/L for a uniform string. Do not confuse tension Fₜ with period T.
2. Controlled scaling
At fixed μ, quadrupling tension doubles speed; doubling tension gives √2 times speed. At fixed tension, quadrupling μ halves speed. Changing both variables can cancel.
3. Frequency comparison
At fixed tension and μ, changing source frequency does not change speed in this linear non-dispersive model. Wavelength adjusts inversely. Small-amplitude independence is also a model condition.
4. Limits and different media
Actual propagation can depend on wave type, stiffness, temperature, frequency and amplitude. Dispersion or nonlinear waves require qualifications. Sound speeds are approximate and condition-dependent; density alone does not rank every material’s sound speed.
5. Numerical correction
The original example changing tension from 25 N to 100 N is a quadrupling, so at fixed density its speed doubles. Calling that change a doubling of tension would give the wrong scaling explanation.
Worked independent practice
C1: 15.0 m/s. C2: .0300 kg/m, 20.0 m/s and .800 m. C3: 10.0 m/s and 1.00 m; tension and density cancel, and a fair trial fixes density and source frequency.
Live investigation and access
An ideal right-moving string pattern has v = √(Fₜ/μ) and λ = v/f. Displacement amplitude is .020 m. Each run covers three physical periods, played over six real seconds; the displayed duration changes when frequency changes. Horizontal scale is 45 pixels/m and vertical displacement is enlarged to 800 pixels/m. The red material point stays at x = 4 m. Positive tension and density avoid singular or slack-string cases outside this model.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
AS 9702 7.1 covers progressive-wave speed and the wave equation. AP Physics 2 14.1 explicitly includes taut-string speed; 14.2 supplies periodic-wave relations. The detailed string-speed model is an application beyond the AS 7.1 formula list.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I calculate mass per length.
- I take the square root.
- I change one variable in a fair comparison.
- I distinguish speed from frequency and wavelength.
- I state the small-wave ideal-string assumptions.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.6 Complete! · All 10 levels cleared · PHYSICS CREST
★ Wave Speed and Medium Conditions Investigator
A change in source frequency is different from a change in medium properties.