WONDER — The Mystery
Same Repeat Rate, Different Spacing and Direction
A periodic wave meeting a stationary linear boundary drives the boundary at the source frequency. Its transmitted speed can differ, so its repeat spacing changes. At oblique incidence, matching phase along the boundary also changes the propagation direction. At normal incidence, spacing can change without bending.
Model: For stationary linear transmission, f₁ = f₂ and λ₂/λ₁ = v₂/v₁. For isotropic plane waves, phase matching gives sinθ₁/v₁ = sinθ₂/v₂. Optical refraction uses n₁ sinθ₁ = n₂ sinθ₂ with v = c/n. Angles are measured from the normal. Boundary reflection depends on impedance and other conditions, not speed alone.
PREDICT — Commit to Your Answer
DOK 2 — PredictA normally incident periodic wave enters a stationary medium where its phase speed halves. What changes?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
λ = v/f halves at unchanged f. Both incidence and transmission angles are zero.
▶ PLAY — Live Moving Wavefront Refraction
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, change only incidence angle, then change only second-medium speed. Watch moving fronts meet the stationary boundary with matching phase and compare wavelength and direction.
Geometrical phase-front model for ideal isotropic non-dispersive media. Medium 1 speed is 4 m/s. Controls set source frequency, incidence angle from the vertical normal and medium 2 speed. Both media share the same frequency and tangential wave-vector component. Each trial covers two physical seconds played over six real seconds. Spatial scale is 50 pixels/m in both directions; front spacing and arrow angles use this same scale. The model shows steady phase fronts, not a pulse launch, displacement amplitudes, reflected power or absorption. When the speed ratio requires sinθ₂ > 1, no propagating transmitted front is shown; the gold returning ray represents the corresponding optical lossless total-internal-reflection case. Evanescent fields are outside this geometrical model.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Frequency, Spacing, Angle and Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Frequency and wavelength
Click to flip
Frequency and wavelength
A stationary time-independent linear boundary preserves temporal frequency. At the same f, a smaller transmitted speed gives a proportionally smaller wavelength. Moving or time-varying boundaries can require a different treatment.
Rule 2
Direction and the normal
Click to flip
Direction and the normal
For isotropic media, sinθ₁/v₁ = sinθ₂/v₂. Slower transmission bends toward the normal; faster transmission bends away when transmission is possible. At normal incidence both angles remain zero even if wavelength changes.
Rule 3
Reflection is conditional
Click to flip
Reflection is conditional
A boundary may reflect, transmit or absorb. Impedance matching can eliminate reflection; an ideal reflector can eliminate propagating transmission. The same-tension ideal-string coefficients r = (v₂−v₁)/(v₁+v₂) and t = 1+r describe displacement only in that particular model.
Rule 4
Keep the variable and model explicit
Click to flip
Keep the variable and model explicit
String displacement, sound pressure and electromagnetic fields have different reflection conditions. Never infer an acoustic pressure inversion just from string speed ordering. Energy conservation includes reflected, transmitted and absorbed energy where relevant.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every stationary boundary must change the transmitted frequency.”
Correct — the claim is false.
False. In the stated linear time-independent model, transmitted temporal frequency stays equal to the source frequency.
Myth 2: “Every change in wavelength forces a change in ray direction.”
Correct — the claim is false.
False. At normal incidence the wavelength can change while the ray remains along the normal.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Boundary Relations and Geometry
DOK 2 — ApplyUse the boundary condition and angle reference.
Instructor Q1 — Normal Incidence
A wave slows down at normal incidence. Its direction:
Instructor Q2 — Reflection Claim
The speed-only reflection coefficient can be used for every sound-pressure and optical boundary:
Instructor Q3 — Transmitted Spacing
A stationary transmitted periodic wave has f = 8 Hz and speed 12 m/s. Find wavelength.
Instructor Q4 — Source Rate
At a stationary linear boundary the incident frequency is 720 Hz. Find transmitted frequency.
4/4 — Instructor Questions Completed
Preserved frequency does not imply preserved wavelength, and changed speed does not guarantee bending.
✎ PRACTICE — Independent Boundary Evidence
DOK 1–3 — PracticeChallenge 1: An Unseen Transmitted Wave
A periodic source sends a wave through a stationary linear boundary. Source frequency is 600 Hz and transmitted phase speed is 300 m/s. Find transmitted wavelength.
Step-by-Step Solution
Transmitted f = 600 Hz, so λ₂ = 300/600 = .500 m.
Challenge 2: Light at an Oblique Boundary
Vacuum light of wavelength 600 nm enters a transparent isotropic medium with refractive index √2. Incidence is 45° from the normal. Find the refracted angle and wavelength in the medium.
Step-by-Step Solution
sinθ₂ = sin45°/√2 = .5, so θ₂ = 30°. Medium wavelength is 600 nm/√2 ≈ 424.264 nm = 4.24264×10⁻⁷ m.
Challenge 3: Audit the Boundary Report
A periodic plane wave travels from speed 6.0 m/s to 3.0 m/s across a stationary linear isotropic boundary. Frequency is 5.0 Hz and incidence is 30° from the normal. Find transmitted wavelength and angle. A report halves frequency, keeps the old wavelength and claims every boundary must reflect simply because it has a speed change. Correct all three claims, and explain what happens to direction at normal incidence.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
Frequency stays 5 Hz; λ₂ = 3/5 = .600 m. sinθ₂ = (3/6)sin30° = .25; θ₂ ≈ 14.48°. Old λ₁ = 1.20 m cannot remain. Reflection depends on impedance and boundary conditions and need not occur at every boundary. At normal incidence direction remains normal even when spacing changes.
☷ CHALLENGE — Separate Invariant, Change and Qualification
DOK 2 — ApplySeparate Invariant, Change and Qualification
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Preserved frequency does not imply preserved wavelength, and changed speed does not guarantee bending.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain preserved frequency, changed wavelength and bending from the normal at an oblique stationary boundary. Include normal incidence and qualify claims about reflection, amplitude and energy.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 12.8 — Wave Transmission and Refraction
Reach the Peak of Understanding
1. Frequency and wavelength
A stationary time-independent linear boundary preserves temporal frequency. At the same f, a smaller transmitted speed gives a proportionally smaller wavelength. Moving or time-varying boundaries can require a different treatment.
2. Direction and the normal
For isotropic media, sinθ₁/v₁ = sinθ₂/v₂. Slower transmission bends toward the normal; faster transmission bends away when transmission is possible. At normal incidence both angles remain zero even if wavelength changes.
3. Reflection is conditional
A boundary may reflect, transmit or absorb. Impedance matching can eliminate reflection; an ideal reflector can eliminate propagating transmission. The same-tension ideal-string coefficients r = (v₂−v₁)/(v₁+v₂) and t = 1+r describe displacement only in that particular model.
4. Keep the variable and model explicit
String displacement, sound pressure and electromagnetic fields have different reflection conditions. Never infer an acoustic pressure inversion just from string speed ordering. Energy conservation includes reflected, transmitted and absorbed energy where relevant.
5. Pulse widths and everyday claims
At a stationary equal-tension string junction, a transmitted pulse with the same temporal duration has spatial width proportional to transmitted speed: slowing makes it narrower, not wider. Sound frequency crossing a boundary does not prove that a voice produced underwater has identical pitch or timbre; production and hearing conditions differ.
Worked independent practice
C1: .500 m. C2: 30° and 4.24264×10⁻⁷ m. C3: .600 m and about 14.48°; f stays 5 Hz, reflection is conditional and normal incidence does not bend.
Live investigation and access
Geometrical phase-front model for ideal isotropic non-dispersive media. Medium 1 speed is 4 m/s. Controls set source frequency, incidence angle from the vertical normal and medium 2 speed. Both media share the same frequency and tangential wave-vector component. Each trial covers two physical seconds played over six real seconds. Spatial scale is 50 pixels/m in both directions; front spacing and arrow angles use this same scale. The model shows steady phase fronts, not a pulse launch, displacement amplitudes, reflected power or absorption. When the speed ratio requires sinθ₂ > 1, no propagating transmitted front is shown; the gold returning ray represents the corresponding optical lossless total-internal-reflection case. Evanescent fields are outside this geometrical model.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 7.1 supplies v = fλ; detailed refraction here is supporting prior knowledge and enrichment. AP Physics 2 14.3 covers wave boundaries, and 13.3 explicitly covers optical refraction and total internal reflection. The simulator is geometric and makes no reflected-power claim.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 1 and AP Physics 2 CEDs, as mapped above. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I keep boundary frequency unchanged under the stated conditions.
- I measure angles from the normal.
- I distinguish normal from oblique incidence.
- I do not infer reflection solely from speed.
- I state the limits of the phase-front model.
— Crest ☆ “Reach the Peak of Understanding”
Mission 12.8 Complete! · All 10 levels cleared · PHYSICS CREST
★ Wave Transmission and Refraction Investigator
Preserved frequency does not imply preserved wavelength, and changed speed does not guarantee bending.