WONDER — The Mystery
The String Vibrates; Air Carries the Disturbance
A guitar string vibrates, and its body couples that motion to the air. A pattern of small pressure and density changes reaches your ear. Air does not have to travel all the way from guitar to listener. In a bell-jar demonstration, removing air reduces the sound transmitted through the gas, while light still crosses the jar. A little residual sound can travel through solid supports.
Model: Small-amplitude sound in a uniform fluid is a longitudinal mechanical wave. Material oscillates parallel to propagation while pressure and density disturbances carry energy. A solid can also support transverse elastic waves. The fluid model does not carry sound through vacuum, and its ideal oscillations have no mean material drift. Random molecular motion is not shown.
PREDICT — Commit to Your Answer
DOK 2 — PredictA pressure disturbance travels horizontally through still air. Which direction describes the organized oscillatory motion of the air?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Sound in air is longitudinal. A pressure-versus-position curve plots a scalar pressure change; its vertical axis is not the direction of air motion.
▶ PLAY — Live Air Motion and Pressure
DOK 2 — InvestigatePredict, measure and compare
Measure a baseline, double only frequency, then double only displacement amplitude. Compare wavelength, local oscillation and pressure amplitude.
This is an established right-travelling plane sound wave in air: speed c = 343 m/s, density ρ = 1.20 kg/m³. Displacement ξ = A cos(kx−ωt), with k = ω/c and ω = 2πf; pressure change is −ρc² times the spatial derivative of displacement. The dots move longitudinally; the lower curve is pressure change, not a transverse air shape. The 1.372 m span uses 262.4 pixels/m, displacement is enlarged to 500000 pixels/m, and pressure uses 4 pixels/Pa. A run covers .008 physical seconds over six real seconds. There is no source turn-on, spreading, absorption or random molecular motion, and no audio is played.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Separate the Medium from the Pattern
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Mechanical and longitudinal
Click to flip
Mechanical and longitudinal
Sound requires matter. In a fluid, organized material oscillation is parallel to propagation. Mechanical waves in solids may be longitudinal or transverse. A vacuum cannot transmit a mechanical sound wave.
Rule 2
Compression, rarefaction and wavelength
Click to flip
Compression, rarefaction and wavelength
A compression has density and pressure above their undisturbed values; a rarefaction has them below. Wavelength is the distance between successive points in the same phase, such as neighboring compression centers. Compression center to nearest rarefaction center is λ/2 for a sinusoid, not λ.
Rule 3
A graph is a representation
Click to flip
A graph is a representation
A pressure-versus-position graph has pressure on its vertical axis. It does not say the air moves upward. For a sinusoidal travelling sound wave, pressure and displacement are a quarter-cycle out of phase; pressure and material velocity are in phase for rightward propagation.
Rule 4
Frequency and transport
Click to flip
Frequency and transport
T = 1/f and c = fλ for this periodic wave. At fixed medium conditions, increasing frequency shortens wavelength, while changing amplitude in the linear model does not change speed. Ideal particles oscillate locally; energy and the disturbance travel.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Every sound wave, including elastic waves in solids, must be longitudinal.”
Correct — the claim is false.
False. Sound in ordinary fluids is longitudinal, but solids can support transverse as well as longitudinal elastic waves.
Myth 2: “From a compression center to the nearest rarefaction center is one wavelength.”
Correct — the claim is false.
False. Those points are opposite phase and λ/2 apart for a sinusoid. Use successive compression centers for λ.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Read Sound Representations
DOK 2 — ApplyDistinguish local motion, pressure change and the wavelength between equal phases.
Instructor Q1 — Pressure Graph
An upward peak on a pressure-versus-position graph means:
Instructor Q2 — Medium
Which can carry a mechanical sound disturbance?
Instructor Q3 — Period
A tone has frequency 400 Hz. Find its period.
Instructor Q4 — Equal Phases
Neighboring compression centers are .858 m apart. Find the wavelength.
4/4 — Instructor Questions Completed
The pressure pattern travels, while material oscillates along the direction of propagation.
✎ PRACTICE — Independent Sound Investigations
DOK 1–3 — PracticeChallenge 1: Timing a Tone
A steady sinusoidal sound has frequency 625 Hz. Find its period.
Step-by-Step Solution
T = 1/625 = .00160 s.
Challenge 2: A Spatial Record
A sinusoidal sound travels at 340 m/s. Successive compression centers are .425 m apart. Find its frequency and the separation from a compression center to the nearest rarefaction center.
Step-by-Step Solution
λ = .425 m. f = 340/.425 = 800 Hz. The nearest rarefaction is λ/2 = .2125 m away.
Challenge 3: Audit Matter and Wave Motion
A sinusoidal plane sound in air travels at 345 m/s with wavelength .690 m. A marked particle starts at its maximum positive displacement of .00000230 m. After .00400 s, find the distance travelled by the pressure pattern, the number of complete particle oscillations and the particle displacement change. A report says the particle travels that pattern distance, a pressure-graph peak means upward particle motion, and the same wave crosses vacuum without matter. Correct all three claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
f = 345/.690 = 500 Hz; T = .00200 s. The pattern travels 345×.00400 = 1.38 m. The particle completes two cycles and returns to its initial displacement, so its change is zero. Its oscillation is local and parallel to propagation. A pressure peak means higher pressure, not vertical motion. Vacuum cannot carry this mechanical wave.
☷ CHALLENGE — Classify the Sound Statement
DOK 2 — ApplyClassify the Sound Statement
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
The pressure pattern travels, while material oscillates along the direction of propagation.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain how a sound pressure pattern travels while air oscillates locally. Explain compression and rarefaction, the graph axes, and the need for a medium.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 13.1 — What Is Sound?
Reach the Peak of Understanding
1. Mechanical and longitudinal
Sound requires matter. In a fluid, organized material oscillation is parallel to propagation. Mechanical waves in solids may be longitudinal or transverse. A vacuum cannot transmit a mechanical sound wave.
2. Compression, rarefaction and wavelength
A compression has density and pressure above their undisturbed values; a rarefaction has them below. Wavelength is the distance between successive points in the same phase, such as neighboring compression centers. Compression center to nearest rarefaction center is λ/2 for a sinusoid, not λ.
3. A graph is a representation
A pressure-versus-position graph has pressure on its vertical axis. It does not say the air moves upward. For a sinusoidal travelling sound wave, pressure and displacement are a quarter-cycle out of phase; pressure and material velocity are in phase for rightward propagation.
4. Frequency and transport
T = 1/f and c = fλ for this periodic wave. At fixed medium conditions, increasing frequency shortens wavelength, while changing amplitude in the linear model does not change speed. Ideal particles oscillate locally; energy and the disturbance travel.
Worked independent practice
C1: .00160 s. C2: 800 Hz and .2125 m. C3: 1.38 m pattern distance, two complete local cycles, zero displacement change, with all three report errors corrected.
Live investigation and access
This is an established right-travelling plane sound wave in air: speed c = 343 m/s, density ρ = 1.20 kg/m³. Displacement ξ = A cos(kx−ωt), with k = ω/c and ω = 2πf; pressure change is −ρc² times the spatial derivative of displacement. The dots move longitudinally; the lower curve is pressure change, not a transverse air shape. The 1.372 m span uses 262.4 pixels/m, displacement is enlarged to 500000 pixels/m, and pressure uses 4 pixels/Pa. A run covers .008 physical seconds over six real seconds. There is no source turn-on, spreading, absorption or random molecular motion, and no audio is played.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
The core links to Cambridge AS waves and longitudinal-wave representations and AP Physics 2 periodic mechanical waves. The pressure–displacement derivative is an explanatory extension, checked against OpenStax University Physics 17.1; it is not an additional required formula.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I qualify longitudinal sound as sound in a fluid.
- I distinguish pressure graphs from particle paths.
- I measure wavelength between equal phases.
- I distinguish local motion from wave transport.
- I state the medium and its conditions.
— Crest ☆ “Reach the Peak of Understanding”
Mission 13.1 Complete! · All 10 levels cleared · PHYSICS CREST
★ What Is Sound? Investigator
The pressure pattern travels, while material oscillates along the direction of propagation.