WONDER — The Mystery
Pitch, Intensity and Timbre Describe Different Features
A loud low note and a soft high note are possible. Pure-tone pitch mainly follows frequency. Intensity measures physical energy flow, while loudness is a perception affected by frequency, duration and the listener. A violin and flute can have the same fundamental frequency yet different waveforms and timbre.
Model: We compare linear plane sound in the same air and at the same listening location. Pressure amplitude is specified, rather than an unnamed wave height. Intensity at fixed medium scales with pressure amplitude squared. A sinusoid is a pure tone; adding integer harmonics changes its shape. Detailed decibel and timbre calculations are enrichment.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo pure tones in the same air have the same pressure amplitude. Their frequencies are 440 Hz and 880 Hz. Which has the higher pitch?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
880/440 = 2: one octave. In the stated plane-wave model equal pressure amplitudes give equal physical intensity, but this does not guarantee equal perceived loudness.
▶ PLAY — Live Tone and Harmonic-Mix Lab
DOK 2 — InvestigatePredict, measure and compare
Complete baseline, frequency-only and pressure-only trials. Then add a second harmonic while keeping the fundamental pressure fixed and inspect the shape.
An established right-travelling plane wave has c = 343 m/s and ρ = 1.20 kg/m³. Pressure is p₁ cos(kx−ωt) + h p₁ cos(2kx−2ωt). Material displacement is the corresponding longitudinal sum; both frequency components obey c = fλ. The harmonic pressure ratio h is adjustable. Average intensity is (p₁² + h²p₁²)/(2ρc), and the enrichment sound intensity level is 10 log₁₀(I/10⁻¹²) dB for nonzero I. The canvas spans 1.372 m, uses 40 pixels/Pa, and enlarges displacement to 5000000 pixels/m. A run covers .010 physical seconds over six real seconds. No audio or perceived-loudness scale is produced.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Use Physical Quantities with Conditions
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Pitch and octaves
Click to flip
Pitch and octaves
For a pure tone, frequency is the main pitch cue. Doubling frequency is one octave; amplitude can change without changing frequency. A4 = 440 Hz is a common tuning reference, not a rule followed by every performance.
Rule 2
Intensity and loudness
Click to flip
Intensity and loudness
Intensity is average power per area in W/m²; loudness is perceived. For a plane wave, I = p₀²/(2ρc) using peak pressure amplitude p₀, or I = p_rms²/(ρc). Specify the medium and amplitude type. At fixed displacement amplitude, changing frequency also changes intensity; at fixed pressure amplitude in this model it does not.
Rule 3
Decibels, enrichment
Click to flip
Decibels, enrichment
Intensity level β = 10 log₁₀(I/I₀), with I₀ = 10⁻¹² W/m². Level difference is 10 log₁₀(I₂/I₁); +10 dB means ten times physical intensity. For same-medium pressure comparisons, Δβ = 20 log₁₀(p₂/p₁). Zero dB is the reference intensity, not silence; zero intensity has no finite logarithmic level.
Rule 4
Timbre and hearing
Click to flip
Timbre and hearing
The relative strengths and phases of harmonics, along with attack and decay, contribute to timbre. Adding a second harmonic to a nonzero fundamental does not double that fundamental. The often-used hearing range of about 20 Hz–20 kHz is approximate and varies by person, level and conditions. Neither a frequency alone nor a level alone proves audibility.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Doubling pressure amplitude doubles intensity and guarantees twice the perceived loudness.”
Correct — the claim is false.
False. In the same linear plane-wave medium, intensity quadruples; loudness perception has no universal exact doubling rule.
Myth 2: “Zero decibels means no sound energy.”
Correct — the claim is false.
False. Zero dB corresponds to the chosen nonzero reference intensity. Silence has zero intensity and no finite logarithmic level.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Tone and Level Comparisons
DOK 2 — ApplyChoose the physical quantity and state the controlled comparison.
Instructor Q1 — Pitch
A pure tone frequency doubles. Its pitch moves:
Instructor Q2 — Timbre
A second harmonic is added while the original fundamental remains. Which conclusion is supported?
Instructor Q3 — A Tone Period
A pure tone has frequency 500 Hz. Find its period.
Instructor Q4 — Intensity Ratio
Pressure amplitude triples for comparable plane waves in the same medium. Find the intensity ratio.
4/4 — Instructor Questions Completed
Frequency, pressure amplitude and harmonic mix are separate controls; perceived loudness is not an exact intensity multiplier.
✎ PRACTICE — Independent Music and Level Audits
DOK 1–3 — PracticeChallenge 1: A High Tone
A pure tone has frequency 8.00 kHz. Find its period.
Step-by-Step Solution
T = 1/8000 = .000125 s.
Challenge 2: A Controlled Pressure Change
Two comparable plane sounds in the same air have peak pressure amplitudes .00230 Pa and .00690 Pa. Find the new/old intensity ratio and the intensity-level increase.
Step-by-Step Solution
The pressure ratio is 3; intensity ratio is 9. Δβ = 10 log₁₀9 = 9.54243 dB.
Challenge 3: Audit a Recording Report
A pure tone has frequency 360 Hz and intensity .0000320 W/m². In the same plane-wave medium its pressure amplitude doubles and frequency becomes 720 Hz. Find the new intensity and level increase. A report claims intensity only doubles, higher pitch always means greater physical intensity, 0 dB is silence, and adding a 1440 Hz harmonic afterward replaces the 720 Hz fundamental. Correct all four claims.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
I₂ = 4I₁ = .000128 W/m²; Δβ = 10 log₁₀4 = 6.02060 dB. In this model the pressure change controls the intensity ratio, while the higher frequency changes pitch. Zero dB denotes I₀, not silence. Adding a 1440 Hz harmonic while retaining 720 Hz changes timbre and waveform; it does not replace the fundamental.
☷ CHALLENGE — Classify the Music Quantity
DOK 2 — ApplyClassify the Music Quantity
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Frequency, pressure amplitude and harmonic mix are separate controls; perceived loudness is not an exact intensity multiplier.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain pitch, physical intensity, perceived loudness and timbre. State a controlled amplitude comparison and explain the decibel reference.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 13.2 — The Sound of Music
Reach the Peak of Understanding
1. Pitch and octaves
For a pure tone, frequency is the main pitch cue. Doubling frequency is one octave; amplitude can change without changing frequency. A4 = 440 Hz is a common tuning reference, not a rule followed by every performance.
2. Intensity and loudness
Intensity is average power per area in W/m²; loudness is perceived. For a plane wave, I = p₀²/(2ρc) using peak pressure amplitude p₀, or I = p_rms²/(ρc). Specify the medium and amplitude type. At fixed displacement amplitude, changing frequency also changes intensity; at fixed pressure amplitude in this model it does not.
3. Decibels, enrichment
Intensity level β = 10 log₁₀(I/I₀), with I₀ = 10⁻¹² W/m². Level difference is 10 log₁₀(I₂/I₁); +10 dB means ten times physical intensity. For same-medium pressure comparisons, Δβ = 20 log₁₀(p₂/p₁). Zero dB is the reference intensity, not silence; zero intensity has no finite logarithmic level.
4. Timbre and hearing
The relative strengths and phases of harmonics, along with attack and decay, contribute to timbre. Adding a second harmonic to a nonzero fundamental does not double that fundamental. The often-used hearing range of about 20 Hz–20 kHz is approximate and varies by person, level and conditions. Neither a frequency alone nor a level alone proves audibility.
Worked independent practice
C1: .000125 s. C2: ratio 9 and 9.54243 dB. C3: .000128 W/m² and 6.02060 dB, with all four report claims corrected.
Live investigation and access
An established right-travelling plane wave has c = 343 m/s and ρ = 1.20 kg/m³. Pressure is p₁ cos(kx−ωt) + h p₁ cos(2kx−2ωt). Material displacement is the corresponding longitudinal sum; both frequency components obey c = fλ. The harmonic pressure ratio h is adjustable. Average intensity is (p₁² + h²p₁²)/(2ρc), and the enrichment sound intensity level is 10 log₁₀(I/10⁻¹²) dB for nonzero I. The canvas spans 1.372 m, uses 40 pixels/Pa, and enlarges displacement to 5000000 pixels/m. A run covers .010 physical seconds over six real seconds. No audio or perceived-loudness scale is produced.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Core wave quantities and controlled intensity comparisons support Cambridge AS waves and AP Physics 2 periodic waves. Timbre, hearing-range interpretation and detailed logarithmic decibel work are enrichment, rather than additional required AP or Cambridge outcomes.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I state which amplitude is compared.
- I distinguish physical intensity from perceived loudness.
- I use logarithmic level differences.
- I distinguish fundamental from an added harmonic.
- I treat hearing limits as approximate.
— Crest ☆ “Reach the Peak of Understanding”
Mission 13.2 Complete! · All 10 levels cleared · PHYSICS CREST
★ The Sound of Music Investigator
Frequency, pressure amplitude and harmonic mix are separate controls; perceived loudness is not an exact intensity multiplier.