Skip to lesson
PC

PHYSICS CREST

Global Physics Academy

Mission 13.3 · Speed of Sound Reach the Peak of Understanding
Journey Tracker
Progress
0/10
1

WONDER — The Mystery

One Disturbance, Different Travel Times

A flash reaches an observer before the thunder because light and sound have very different speeds. Sound speed depends on the material, its elastic response, density and state. Steel rod, water and air are useful examples, but “all solids are faster than all gases” is not a universal rule.

Compare propagationSame physical distanceMaterial properties matterTravel time is measurable
Given conditions only; arrows and distances are schematic.

Model: Uniform still media and small disturbances. For dry air near ordinary temperatures we use the enrichment approximation c ≈ 331 + .6T, with c in m/s and T in °C. Water has the illustrative fixed speed 1500 m/s; longitudinal waves in the chosen slender steel rod use 5000 m/s. These are model values, not universal constants for every liquid or steel geometry. Audible air is treated as non-dispersive.

2

PREDICT — Commit to Your Answer

DOK 2 — Predict

Dry air warms from 0 °C to 30 °C without changing gas composition. In the ordinary-temperature model, sound speed:

Compare propagationSame physical distanceMaterial properties matterTravel time is measurable
Given conditions only; arrows and distances are schematic.

Commit to both a prediction and a reason before revealing the explanation.

Step 1: Pick your answer.

STOP! Before revealing — why did you pick that?

3

▶ PLAY — Live Pulse Travel in Three Media

DOK 2 — Investigate

Predict, measure and compare

Measure a baseline in 0 °C air, change only air temperature, then change only medium. Compare distances after the same .020 s. Try frequency alone too.

A pulse front emitted at t = 0 moves at x = ct through a uniform medium. The displayed track spans 100 m at 3.6 pixels/m. Every run covers .020 physical seconds over six real seconds, so front position rather than equal-screen crossing time shows the speed difference. The colored marker follows the wave front; its rings are schematic and it is not a material particle. Air uses c ≈ 331 + .6T over −20 to 40 °C. Water and the selected slender steel rod use fixed illustrative speeds 1500 and 5000 m/s; the air-temperature control is unused for those cases. Wavelength readouts describe a periodic tone at the chosen frequency, not the width of this schematic pulse.

Use the labelled readouts.

Status: Ready

Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.

Measurements

Physical time:
Medium:
Temperature used:
Model sound speed:
Pulse-front distance:
Periodic-tone wavelength:
Predicted one-way time to 100 m:

Load givens — then predict and run

Loading a setup earns no trial credit.

4

♢ DISCOVER — State the Material and the Model

DOK 1 — Recall

Flip all 4 rule cards. Keep the quantities and model conditions clear.

Rule 1

Elasticity and density

Click to flip

Elasticity and density

A fluid’s small-signal speed obeys c = √(B/ρ), with B the appropriate bulk modulus and ρ the density. This detailed relation is extension. Stiffness and inertia must be considered together; greater density reduces speed only if the elastic modulus is held fixed. Different kinds of solid wave have different elastic-modulus relations.

Rule 2

Dry air and temperature

Click to flip

Dry air and temperature

For a fixed ideal-gas composition, c scales with √T_K. The classroom approximation c ≈ 331 + .6T_C is useful near ordinary temperatures, not near absolute zero or over arbitrary temperature ranges. Water and steel also have state-dependent speeds; fixed values in this lab deliberately omit that dependence.

Rule 3

Periodic waves and pulse travel

Click to flip

Periodic waves and pulse travel

For periodic waves c = fλ. The source frequency remains unchanged at a stationary boundary, while wavelength adjusts to the new speed. In this non-dispersive model increasing frequency does not increase c. A pulse travel time follows distance divided by speed; a pulse need not have a unique wavelength.

∫

Rule 4

Timing a signal

Click to flip

Timing a signal

One-way travel gives d = ct. An echo returning to the source travels twice the boundary distance, so d = ct_echo/2. For simultaneous light and sound signals, delay = d/c_sound − d/c_light; the light term is negligible only under the stated ordinary-distance approximation.

Flip all 4 cards to reveal the rules. 0/4 flipped
5

MISCONCEPTION ATTACK — Destroy the Myths

DOK 2 — Analyze

Choose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.

Myth 1: “Every solid transmits sound faster than every gas.”

Myth 2: “Doubling audible frequency doubles speed in the same still-air model.”

6

✦ THE SECOND “AHA!” — Travel, Frequency and Material Conditions

DOK 2 — Apply

Use the stated approximation only within its ordinary-temperature range.

Progress
0/4
Compare propagationSame physical distanceMaterial properties matterTravel time is measurable
Given conditions only; arrows and distances are schematic.

1

Instructor Q1 — Material Comparison

Which controls sound speed?

2

Instructor Q2 — Frequency Change

Same air conditions; frequency doubles. Wavelength:

3

Instructor Q3 — Warm Air

Use the taught dry-air approximation for 20 °C. Find c.

Warm AirDry air: 20 °C
Given conditions only; arrows and distances are schematic.
m/s
4

Instructor Q4 — One-Way Flight

A pulse travels 51.0 m at 340 m/s. Find its one-way travel time.

One-Way FlightDistance: 51.0 mSpeed: 340 m/s
Given conditions only; arrows and distances are schematic.
s
7

✎ PRACTICE — Independent Speed and Timing Audits

DOK 1–3 — Practice
DOK 1 — Routine

Challenge 1: A Cool Day

Dry air is at 10.0 °C. Find the sound speed predicted by the ordinary-temperature approximation taught in this mission.

A Cool DayDry air: 10.0 °C
Given conditions only; arrows and distances are schematic.
m/s
DOK 2 — Application

Challenge 2: An Underwater Echo

A sound echo returns to its stationary source after .0920 s in water where c = 1500 m/s. The reflector is stationary and the path is straight. Find its distance from the source and the wavelength of a 60.0 kHz periodic signal in that water.

An Underwater Echoc: 1500 m/sEcho time: .0920 sf: 60.0 kHz
Given conditions only; arrows and distances are schematic.
m
m
DOK 3 — Audit & Justify

Challenge 3: Audit a Controlled Experiment

A straight 120 m air path is tested at 0 °C and 30 °C using the taught dry-air approximation. A 1.00 kHz tone is used both times. Find the decrease in one-way travel time and the warm-air wavelength. A report says doubling source frequency would double speed, density alone proves that water must be slower than air, and the approximate air formula remains valid at every temperature. Correct all three claims and identify what must be controlled when testing the temperature effect.

Audit a Controlled ExperimentPath: 120 mAir: 0 °C → 30 °CTone: 1.00 kHz
Given conditions only; arrows and distances are schematic.
s
m

Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.

8

☷ CHALLENGE — Classify the Speed Statement

DOK 2 — Apply

Classify the Speed Statement

Select each statement and place it in its matching category. Judge the physical conditions.

0 / 6 correct

9

TEACH — The Feynman Technique

DOK 3 — Teach

Your Final Mission: Explain why light arrives before sound, what material properties control sound speed, and how one-way timing differs from echoes.

Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.

Type Your Explanation (≥ 3 sentences)

Final reward below

Hidden exam secrets inside — Crest's private notebook.