WONDER — The Mystery
Adding Signed Pressure Changes Can Reduce the Result
Two coherent speakers can create positions where pressure changes reinforce and others where they largely cancel. Equal frequency by itself does not guarantee a loud maximum: source phase, path difference and amplitudes matter. Two nearby frequencies produce a time-varying envelope, useful for tuning.
Model: Linear superposition in the same medium. Pressure changes are signed values relative to equilibrium. A stable spatial pattern needs coherence. The live model uses prescribed right-travelling plane waves rather than a full room with spherical spreading. Detailed source power, reflections, hearing and absorption are not modeled.
PREDICT — Commit to Your Answer
DOK 2 — PredictTwo equal-amplitude coherent sounds reach a point with the same frequency and a constant phase difference of 180°. Their resultant pressure amplitude is:
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
Equal-amplitude waves in opposite phase cancel the pressure variation at the chosen point. Equal frequency alone does not establish equal phase, and pressure cancellation does not prove destruction of total energy.
▶ PLAY — Live Phase, Superposition and Beats
DOK 2 — InvestigatePredict, measure and compare
Measure in-phase equal waves, change only their initial phase, then change only frequency difference from the baseline. Test unequal amplitudes at opposite phase.
Two established right-travelling plane sound waves have c = 343 m/s and ρ = 1.20 kg/m³. The first has frequency 40 Hz and peak pressure .200 Pa. The second has frequency 40 + Δf Hz, pressure ratio r, and adjustable initial phase φ. Pressure is the signed sum of the two cosine waves, and dots show the corresponding longitudinal displacement sum. The local envelope is the magnitude of the sum of their rotating pressure amplitudes. A run covers one physical second over six real seconds. The span is 17.15 m, pressure uses 120 pixels/Pa and displacement is enlarged to 2500000 pixels/m. The envelope bar keeps its 0–.400 Pa scale. These prescribed waves do not model independent source power or a room’s spatial energy redistribution; no audio is played.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Coherence, Phase and Beat Evidence
DOK 1 — RecallFlip all 4 rule cards. Keep the quantities and model conditions clear.
Rule 1
Signed superposition
Click to flip
Signed superposition
Pressure changes add algebraically. For equal frequency and a phase difference φ, the resultant peak pressure is √(p₁² + p₂² + 2p₁p₂ cosφ). This phasor formula is extension; aligned waves give p₁ + p₂ and opposite waves give |p₁ − p₂|. Zero cancellation needs equal amplitudes and opposite phase.
Rule 2
Coherence and path difference
Click to flip
Coherence and path difference
A stable two-source interference pattern needs a stable phase relationship. For coherent sources initially in phase, path difference nλ gives reinforcement and (n + ½)λ gives opposition. Any source phase shift must also be included. A general two-speaker spatial pattern is not automatically a standing wave.
Rule 3
Beats and tuning
Click to flip
Beats and tuning
For two nearby frequencies, envelope maxima repeat at f_beat = |f₂ − f₁|. The signed cosine factor changes sign at half that rate, but perceived beat pulses use its magnitude. A given nonzero beat rate leaves two candidates f_ref ± f_beat; raising or lowering the unknown slightly can resolve which candidate applies. No modulation also results if one tone is absent, so check both signals.
Rule 4
Intensity and energy conditions
Click to flip
Intensity and energy conditions
For co-propagating same-medium equal-amplitude waves in phase, resultant pressure doubles and intensity is four times one wave’s intensity. Pressure cancellation alone is not an energy-loss measurement. Spatial patterns can redistribute flux; a standing sound wave may have zero pressure change at a node while material motion remains. Prescribed source fields do not imply that their powers equal their isolated-source powers.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Equal frequencies always produce twice the pressure amplitude.”
Correct — the claim is false.
False. The phase difference and amplitudes determine the resultant; equal opposite-phase waves can cancel.
Myth 2: “Six beats per second proves an unknown tone is six hertz above the reference.”
Correct — the claim is false.
False. It could be six hertz above or below; a small controlled adjustment can distinguish them.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Phase and Beat Interpretation
DOK 2 — ApplyUse signed pressure addition and the absolute frequency difference.
Instructor Q1 — Unequal Opposition
Opposite-phase pressures have peak magnitudes 3 Pa and 2 Pa. The resultant amplitude is:
Instructor Q2 — Coherence
What supports a stable interference pattern?
Instructor Q3 — Beat Rate
Steady tones of 300 and 307 Hz overlap. Find the beat rate.
Instructor Q4 — Two Candidates
A 440 Hz reference gives 3 Hz beats. One candidate is 443 Hz. Find the lower candidate.
4/4 — Instructor Questions Completed
Measure both phase and amplitude; a beat rate measures a frequency difference without its sign.
✎ PRACTICE — Independent Interference and Tuning Audits
DOK 1–3 — PracticeChallenge 1: A Fresh Tone Pair
Two steady nearby tones have frequencies 523.8 Hz and 528.4 Hz. Find the beat rate.
Step-by-Step Solution
f_beat = |528.4 − 523.8| = 4.60 Hz.
Challenge 2: Unequal Coherent Sounds
Two same-frequency coherent plane sounds have pressure amplitudes .0120 Pa and .00900 Pa. Find the resultant amplitude when they are in phase, and when their phase difference is 180°.
Step-by-Step Solution
In phase: .0120 + .00900 = .0210 Pa. Opposite phase: |.0120 − .00900| = .00300 Pa; it does not cancel completely.
Challenge 3: Resolve a Tuner’s Ambiguity
An unknown steady tone produces 6 beats/s with a 512 Hz reference. Raising only the unknown tone by 2 Hz reduces the beat rate to 4 beats/s. Find the original and adjusted unknown frequencies. A report assumes equal frequency always means in phase, says every pressure minimum has zero total wave energy, and counts the beat rate as half the frequency difference. Correct all three claims and justify which candidate the adjustment selects.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
The candidates are 506 and 518 Hz. Raising 506 to 508 Hz reduces the difference from 6 to 4 Hz; raising 518 to 520 would increase it to 8 Hz. Thus original 506 Hz, adjusted 508 Hz. Equal frequency needs a phase condition for reinforcement. A pressure node can retain material motion and kinetic energy. Envelope maxima repeat at the full absolute difference, not half of it.
☷ CHALLENGE — Classify the Interference Evidence
DOK 2 — ApplyClassify the Interference Evidence
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Measure both phase and amplitude; a beat rate measures a frequency difference without its sign.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain signed sound superposition, the role of coherence and phase, and how a tuner resolves the two candidates implied by a beat rate.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 13.4 — Sound Interference and Beats
Reach the Peak of Understanding
1. Signed superposition
Pressure changes add algebraically. For equal frequency and a phase difference φ, the resultant peak pressure is √(p₁² + p₂² + 2p₁p₂ cosφ). This phasor formula is extension; aligned waves give p₁ + p₂ and opposite waves give |p₁ − p₂|. Zero cancellation needs equal amplitudes and opposite phase.
2. Coherence and path difference
A stable two-source interference pattern needs a stable phase relationship. For coherent sources initially in phase, path difference nλ gives reinforcement and (n + ½)λ gives opposition. Any source phase shift must also be included. A general two-speaker spatial pattern is not automatically a standing wave.
3. Beats and tuning
For two nearby frequencies, envelope maxima repeat at f_beat = |f₂ − f₁|. The signed cosine factor changes sign at half that rate, but perceived beat pulses use its magnitude. A given nonzero beat rate leaves two candidates f_ref ± f_beat; raising or lowering the unknown slightly can resolve which candidate applies. No modulation also results if one tone is absent, so check both signals.
4. Intensity and energy conditions
For co-propagating same-medium equal-amplitude waves in phase, resultant pressure doubles and intensity is four times one wave’s intensity. Pressure cancellation alone is not an energy-loss measurement. Spatial patterns can redistribute flux; a standing sound wave may have zero pressure change at a node while material motion remains. Prescribed source fields do not imply that their powers equal their isolated-source powers.
Worked independent practice
C1: 4.60 Hz. C2: .0210 Pa and .00300 Pa. C3: 506 Hz then 508 Hz, with the candidate-selection evidence and three report corrections.
Live investigation and access
Two established right-travelling plane sound waves have c = 343 m/s and ρ = 1.20 kg/m³. The first has frequency 40 Hz and peak pressure .200 Pa. The second has frequency 40 + Δf Hz, pressure ratio r, and adjustable initial phase φ. Pressure is the signed sum of the two cosine waves, and dots show the corresponding longitudinal displacement sum. The local envelope is the magnitude of the sum of their rotating pressure amplitudes. A run covers one physical second over six real seconds. The span is 17.15 m, pressure uses 120 pixels/Pa and displacement is enlarged to 2500000 pixels/m. The envelope bar keeps its 0–.400 Pa scale. These prescribed waves do not model independent source power or a room’s spatial energy redistribution; no audio is played.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS interference requires coherence and sound interference; beat calculations are enrichment for Cambridge. AP Physics 2 14.6 includes beats and superposition. The phasor amplitude and explicit plane-wave displacement model are explanatory extensions.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I add signed pressure changes.
- I distinguish equal frequency from phase alignment.
- I require amplitude matching for complete cancellation.
- I check both tuning candidates.
- I avoid inferring total energy from pressure alone.
— Crest ☆ “Reach the Peak of Understanding”
Mission 13.4 Complete! · All 10 levels cleared · PHYSICS CREST
★ Sound Interference and Beats Investigator
Measure both phase and amplitude; a beat rate measures a frequency difference without its sign.