WONDER — The Mystery
A Delayed Repeat and a Lingering Room Are Different
A sufficiently delayed, audible reflected sound can be heard as an echo. Many overlapping reflections can prolong sound as reverberation. Distance controls travel time; boundary response controls how much sound returns. Material labels alone cannot give a universal reflection or absorption percentage.
Model: Straight normal-incidence plane sound in a lossless air path, with one backed boundary that reflects part of a pressure packet and absorbs the rest. This explanatory model omits spreading, room geometry, transmission and multiple reflections. Real boundaries can reflect, transmit and absorb simultaneously.
PREDICT — Commit to Your Answer
DOK 2 — PredictA backed boundary reflects 25% of a plane sound packet’s energy and transmits none. What happens to the remaining energy in this model?
Commit to both a prediction and a reason before revealing the explanation.
Step 1: Pick your answer.
STOP! Before revealing — why did you pick that?
Correct prediction and reasoning saved.
The energy fractions sum to one: 25% reflection, 0% transmission and 75% absorption. Absorption transfers mechanical wave energy into the material, ultimately mostly thermal energy.
▶ PLAY — Live Pressure Packet and Round-Trip Timing
DOK 2 — InvestigatePredict, measure and compare
Measure the baseline, change only reflector distance, then change only reflected energy fraction from the baseline. Inspect zero reflection and zero emitted pressure.
Air has c = 343 m/s and ρ = 1.20 kg/m³. An 8 ms zero-area pressure packet starts at x = 0, reflects at x = d, and returns once; the source end allows it to leave without another reflection. P is incident peak pressure. The prescribed backed load has reflected energy fraction R, pressure coefficient +√R and absorption 1 − R, with no transmission. Right- and left-going pressures give longitudinal displacement from their time integrals, with opposite signs for opposite directions. Corresponding emitted and returned features have delay 2d/c. A run lasts 2d/c + .008 s over six real seconds. The 60 m span uses 6 pixels/m; pressure uses 90 pixels/Pa and displacement is enlarged to 500000 pixels/m. Cumulative absorbed and returned energies are per square metre and follow packet arrival; no audio or room reverb is generated.
Status: Ready
Playback: 6 real seconds per run; read elapsed physical model time. Pause or Step for measurements.
Measurements
Load givens — then predict and run
Loading a setup earns no trial credit.
♢ DISCOVER — Travel Time, Energy and Wave Behaviour
DOK 1 — RecallFlip all four rule cards. Keep the quantities and model conditions clear.
Rule 1
Reflection and energy accounting
Click to flip
Reflection and energy accounting
For a stationary smooth planar boundary, reflected and incident ray angles are equal, measured from the normal. Incident-energy fractions obey R + T + α = 1, including transmission T and absorption α. A backed layer may have T ≈ 0, but unreflected energy is not always all absorbed. In the same medium, reflected pressure-amplitude ratio is √R (extension). At a rigid sound termination, pressure reflects without inversion while particle displacement reverses sign; do not copy a fixed-string displacement rule to pressure.
Rule 2
Echo and reverberation
Click to flip
Echo and reverberation
For a straight out-and-back path with source and detector together, t = 2d/c. A separate echo needs sufficient delay, level and suitable source duration; .1 s is only a rough classroom estimate, not a universal hearing cutoff. At 340 m/s it gives d ≈ 17 m. Reverberation consists of overlapping reflections; a single near-wall reflection alone is not a complete room-reverb model.
Rule 3
Diffraction and transmission
Click to flip
Diffraction and transmission
Diffraction is spreading around edges and through openings. For the same opening and medium, lower frequency has longer wavelength and usually spreads more noticeably. Diffraction is pronounced when the opening is comparable to wavelength; not every short wavelength is fully blocked. Transmission through a wall is a separate material response. Fluid sound is longitudinal and cannot be polarised like a transverse wave.
Rule 4
Refraction and room design
Click to flip
Refraction and room design
Sound rays change direction when speed varies across their path; at normal incidence a uniform boundary need not bend the ray. Frequency stays fixed at a stationary boundary. In ordinary air, warmer regions have greater sound speed; an inversion with cooler air below can bend rays toward the ground. Concave reflectors can concentrate sound for suitable geometry. Absorption treatments, transmission barriers and desired reverberation time solve different problems and depend on frequency and room use.
All rules explored.
MISCONCEPTION ATTACK — Destroy the Myths
DOK 2 — AnalyzeChoose TRUE or FALSE for each claim. The explanation appears after an attempt; only a correct answer completes the claim.
Myth 1: “Any reflection delayed by .100 s is always heard as a distinct echo.”
Correct — the claim is false.
False. Source duration, reflected level and listening conditions also matter; the delay estimate is not a universal threshold.
Myth 2: “All energy not reflected from a real wall is necessarily absorbed.”
Correct — the claim is false.
False. Part may be transmitted. Include reflection, transmission and absorption in the energy balance.
Both myths corrected. Continue to the instructor questions.
✦ THE SECOND “AHA!” — Trace the Path and Account for Energy
DOK 2 — ApplyCount both legs of an echo path and distinguish energy fractions from amplitudes.
Instructor Q1 — Energy Partition
A panel reflects 20% and transmits 30% of incident energy. Its absorption fraction is:
Instructor Q2 — Doorway
For one doorway in the same air, reducing frequency generally makes diffraction:
Instructor Q3 — Round Trip
A reflector is 34 m from a collocated source and detector; c = 340 m/s. Find echo delay.
Instructor Q4 — Pressure Ratio
A backed load reflects .36 of incident plane-wave energy into the same air. For incident peak pressure .100 Pa, find reflected peak pressure (extension).
4/4 — Instructor Questions Completed
Separate travel delay, reflected level and human perception; include transmission before inferring absorption.
✎ PRACTICE — Independent Echo and Acoustic-Panel Audits
DOK 1–3 — PracticeChallenge 1: Locate a Reflector
A short pulse from a collocated source and detector returns from one stationary reflector after .146 s. Sound speed in uniform air is 340 m/s. Find the one-way reflector distance.
Step-by-Step Solution
Total path = 340 × .146 = 49.64 m; one-way distance = 49.64/2 = 24.82 m.
Challenge 2: Measured Energy at a Panel
A .00230 J pulse meets a panel. Reflected energy is .000575 J and transmitted energy .000460 J. Find absorbed energy and the dimensionless reflected-energy fraction.
Step-by-Step Solution
E_abs = .00230 − .000575 − .000460 = .001265 J. R = .000575/.00230 = .250.
Challenge 3: Audit an Acoustic Treatment
At a specified test frequency, panel A reflects 36% and transmits 20% of an incident .00240 J pulse. Panel B reflects 9% and transmits 20%. Each panel is 12.0 m from a collocated source and detector in air with c = 344 m/s. Find B’s absorbed energy, reflected peak-pressure ratio B/A in the same air, and round-trip delay. Recommend which panel reduces reflected energy more at this frequency. A report says all unreflected energy is absorbed, reducing reflection changes travel delay, .100 s guarantees a distinct echo, and lower-frequency sound diffracts less through the same opening. Correct all four claims. The pressure-ratio calculation is extension.
Explanation checks are indicative. Compare your reasoning with the worked solution or your teacher.
Step-by-Step Solution
B absorbs (1 − .09 − .20) × .00240 = .001704 J. Same-medium pressure ratio B/A = √(.09/.36) = .500. Both delays = 2 × 12/344 = .069767 s, unchanged by reflection fraction alone. Panel B reduces reflected energy more at this frequency. Unreflected energy can be transmitted; .100 s is not a universal perceptual threshold. Lower f at fixed c gives longer wavelength and usually more diffraction through one opening. This is not a complete room optimisation.
☷ CHALLENGE — Classify the Boundary Evidence
DOK 2 — ApplyClassify the Boundary Evidence
Select each statement and place it in its matching category. Judge the physical conditions.
0 / 6 correct
Physics Insight
Separate travel delay, reflected level and human perception; include transmission before inferring absorption.
TEACH — The Feynman Technique
DOK 3 — TeachYour Final Mission: Explain echo versus reverberation, and distinguish absorption, transmission, diffraction and refraction.
Use simple words and at least three short sentences. This checks effort; compare your physics with the Vault or your teacher.
Type Your Explanation (≥ 3 sentences)
Draw a labelled explanation with at least three purposeful strokes. This checks effort; compare your physics with the Vault or your teacher.
Cyan pen selected.
Final reward below
Hidden exam secrets inside — Crest's private notebook.
Crest’s Secret Notebook
Mission 13.6 — Sound at Boundaries
Reach the Peak of Understanding
1. Reflection and energy accounting
For a stationary smooth planar boundary, reflected and incident ray angles are equal, measured from the normal. Incident-energy fractions obey R + T + α = 1, including transmission T and absorption α. A backed layer may have T ≈ 0, but unreflected energy is not always all absorbed. In the same medium, reflected pressure-amplitude ratio is √R (extension). At a rigid sound termination, pressure reflects without inversion while particle displacement reverses sign; do not copy a fixed-string displacement rule to pressure.
2. Echo and reverberation
For a straight out-and-back path with source and detector together, t = 2d/c. A separate echo needs sufficient delay, level and suitable source duration; .1 s is only a rough classroom estimate, not a universal hearing cutoff. At 340 m/s it gives d ≈ 17 m. Reverberation consists of overlapping reflections; a single near-wall reflection alone is not a complete room-reverb model.
3. Diffraction and transmission
Diffraction is spreading around edges and through openings. For the same opening and medium, lower frequency has longer wavelength and usually spreads more noticeably. Diffraction is pronounced when the opening is comparable to wavelength; not every short wavelength is fully blocked. Transmission through a wall is a separate material response. Fluid sound is longitudinal and cannot be polarised like a transverse wave.
4. Refraction and room design
Sound rays change direction when speed varies across their path; at normal incidence a uniform boundary need not bend the ray. Frequency stays fixed at a stationary boundary. In ordinary air, warmer regions have greater sound speed; an inversion with cooler air below can bend rays toward the ground. Concave reflectors can concentrate sound for suitable geometry. Absorption treatments, transmission barriers and desired reverberation time solve different problems and depend on frequency and room use.
Worked independent practice
C1: 24.82 m. C2: .001265 J and .250. C3: .001704 J, .500 and .069767 s; panel B reflects less at the tested frequency, with four report errors corrected.
Live investigation and access
Air has c = 343 m/s and ρ = 1.20 kg/m³. An 8 ms zero-area pressure packet starts at x = 0, reflects at x = d, and returns once; the source end allows it to leave without another reflection. P is incident peak pressure. The prescribed backed load has reflected energy fraction R, pressure coefficient +√R and absorption 1 − R, with no transmission. Right- and left-going pressures give longitudinal displacement from their time integrals, with opposite signs for opposite directions. Corresponding emitted and returned features have delay 2d/c. A run lasts 2d/c + .008 s over six real seconds. The 60 m span uses 6 pixels/m; pressure uses 90 pixels/Pa and displacement is enlarged to 500000 pixels/m. Cumulative absorbed and returned energies are per square metre and follow packet arrival; no audio or room reverb is generated.
Run, Pause, Step and Reset work offline. Complete three matched measurements. Loading a preset is not completing a trial. Saved progress resumes paused. Reduced-motion Run gives a final snapshot; Step allows deliberate inspection. Hints and solutions require a genuine unsuccessful numerical attempt and never complete a task. Explanation rubrics are indicative; compare your physics with the solution or a teacher. Teaching submission checks effort rather than certifying scientific accuracy.
Course scope
Cambridge AS 9702 8.1 covers reflected waves in stationary-wave formation and 8.2 covers diffraction. Echo ranging is supporting application; room acoustics, energy fractions and explicit pressure-packet calculations are enrichment. AP Physics 2 14.3 covers boundaries and 14.7 diffraction; absorber design and pressure reflection coefficients are extension.
Sources: Cambridge International 9702 syllabus ; College Board AP Physics 2 CED. Detailed extension models are labelled in the mission.
✓ Crest’s Checklist
- I count both legs of the echo path.
- I include transmission in the energy balance.
- I distinguish energy and pressure fractions.
- I qualify echo perception.
- I separate diffraction from wall transmission.
— Crest ☆ “Reach the Peak of Understanding”
Mission 13.6 Complete! · All 10 levels cleared · PHYSICS CREST
★ Sound at Boundaries Investigator
Separate travel delay, reflected level and human perception; include transmission before inferring absorption.