Skip to lesson
PCPHYSICS CREST
P

Unit 3 Practice · Work, Energy & Power

Training layer: 30 original MCQs + 8 original FRQs. Use the Notes first; here, feedback is immediate for MCQs and FRQ scoring guides stay hidden until you choose to reveal them. The questions deliberately train system selection, graph area, energy representations, functional dependence, experimental linearization, and the four current AP free-response routines.
How to use Practice
For every miss, identify the reasoning error, not just the letter: wrong system? wrong sign? wrong graph area? wrong energy store? wrong functional dependence?

Multiple-Choice Training · 30 Questions

Q1. Easy3.1
Object B has twice the mass of Object A and three times its speed. What is $K_B/K_A$?
Object Amass m; speed vObject Bmass 2m; speed 3vschematic; arrow lengths not to scale
  • A. 18
  • B. 9
  • C. 6
  • D. 3
$K\propto mv^2$, so $K_B/K_A=2(3^2)=18$. Answer A.
Q2. Medium3.1
A $4.0\,\mathrm{kg}$ cart moves right at $8.0\,\mathrm{m\,s^{-1}}$. An observer moves right at $3.0\,\mathrm{m\,s^{-1}}$. What kinetic energy does that observer assign to the cart?
Cart8 m/s; mass 4 kgObserver3 m/sschematic; arrow lengths not to scale
  • A. 32 J
  • B. 50 J
  • C. 128 J
  • D. 98 J
Relative speed is $5.0\,\mathrm{m\,s^{-1}}$, so $K=\tfrac12(4)(5^2)=50\,\mathrm J$. Answer B.
Q3. Medium3.1
A $2.0\,\mathrm{kg}$ object speeds up from $3.0$ to $7.0\,\mathrm{m\,s^{-1}}$. What is $\Delta K$?
Initial3 m/sFinal7 m/s; same 2 kg objectschematic; arrow lengths not to scale
  • A. 20 J
  • B. 58 J
  • C. 40 J
  • D. 80 J
$\Delta K=\tfrac12(2)(7^2-3^2)=49-9=40\,\mathrm J$. Answer C.
Q4. Easy3.1
Two identical pucks move at velocities $+6\,\mathrm{m\,s^{-1}}$ and $-6\,\mathrm{m\,s^{-1}}$. Which statement is correct?
Puck A+6 m/sPuck B−6 m/sschematic; arrow lengths not to scale
  • A. The first has positive $K$ and the second negative $K$.
  • B. The first has twice the kinetic energy.
  • C. The second has twice the kinetic energy.
  • D. They have equal kinetic energy.
Kinetic energy depends on speed squared, not velocity direction. Answer D.
Q5. Medium3.1
For a fixed mass, which qualitative graph best represents kinetic energy $K$ versus speed $v$?
Kvsame mass; v ≥ 0
  • A. An upward-curving parabola through the origin
  • B. A straight line through the origin
  • C. A horizontal line
  • D. A downward-curving parabola
Because $K=\tfrac12mv^2$, $K$ is quadratic in speed. Answer A.
Q6. Medium3.2
A $50\,\mathrm N$ force pulls a crate $4.0\,\mathrm m$ at $60^\circ$ above the displacement. How much work does the force do?
50 N60°displacement 4.0 m
  • A. 200 J
  • B. 100 J
  • C. 50 J
  • D. 0 J
$W=Fd\cos60^\circ=50(4)(0.5)=100\,\mathrm J$. Answer B.
Q7. Easy3.2
A friction force of $12\,\mathrm N$ opposes a box as it moves $5.0\,\mathrm m$. What work does friction do?
Displacement5 mFriction12 Nschematic; arrow lengths not to scale
  • A. +60 J
  • B. 0 J
  • C. −60 J
  • D. −12 J
The force is opposite the displacement: $W=-fd=-12(5)=-60\,\mathrm J$. Answer C.
Q8. Easy3.2
A block moves horizontally on a level table. Which force does zero work on the block during the horizontal displacement?
Ndisplacement
  • A. Kinetic friction
  • B. A horizontal applied force
  • C. Gravity and friction together always
  • D. The table’s normal force
The normal force is perpendicular to the displacement, so its work is zero. Answer D.
Q9. Medium3.2
A $5.0\,\mathrm{kg}$ object changes speed from $2.0$ to $6.0\,\mathrm{m\,s^{-1}}$. What is the net work done on it?
Initial2 m/s; mass 5 kgFinal6 m/sschematic; arrow lengths not to scale
  • A. 80 J
  • B. 40 J
  • C. 160 J
  • D. 20 J
$W_{net}=\Delta K=\tfrac12(5)(36-4)=80\,\mathrm J$. Answer A.
Q10. Medium3.2
On an $F_{\parallel}$–$x$ graph, force increases linearly from 0 to $10\,\mathrm N$ while $x$ increases from 0 to $4.0\,\mathrm m$. What work is done?
0240510F∥ / Nx / m
  • A. 40 J
  • B. 20 J
  • C. 10 J
  • D. 5 J
Work is triangular area: $\tfrac12(4)(10)=20\,\mathrm J$. Answer B.
Q11. Hard3.2
A force parallel to motion is $+8\,\mathrm N$ from $x=0$ to $2\,\mathrm m$ and $-4\,\mathrm N$ from $x=2$ to $5\,\mathrm m$. What is the total work?
025-408F∥ / Nx / m
  • A. 28 J
  • B. −4 J
  • C. 4 J
  • D. 20 J
Signed area gives $8(2)+(-4)(3)=16-12=4\,\mathrm J$. Answer C.
Q12. Medium3.2
A ball moves between the same two heights along two different frictionless paths. How does the work done by gravity compare?
startfinish
  • A. It is larger on the longer path.
  • B. It is larger on the steeper path.
  • C. It depends on speed.
  • D. It is the same on both paths.
Gravity is conservative, so its work depends only on initial and final configuration. Answer D.
Q13. Easy3.3
An ideal spring with $k=200\,\mathrm{N\,m^{-1}}$ is compressed $0.10\,\mathrm m$. How much elastic potential energy is stored?
k = 200 N/m; compression 0.10 m
  • A. 1.0 J
  • B. 2.0 J
  • C. 10 J
  • D. 20 J
$U_s=\tfrac12kx^2=\tfrac12(200)(0.10)^2=1.0\,\mathrm J$. Answer A.
Q14. Easy3.3
A $3.0\,\mathrm{kg}$ object rises $4.0\,\mathrm m$ near Earth. Use $g=10\,\mathrm{m\,s^{-2}}$. What is $\Delta U_g$ of the object–Earth system?
Objectmass 3 kg; rise 4 mupward is positive; schematic, not to scale
  • A. 30 J
  • B. 120 J
  • C. 40 J
  • D. −120 J
$\Delta U_g=mg\Delta y=3(10)(4)=120\,\mathrm J$. Answer B.
Q15. Medium3.3
A student changes the chosen zero-height for gravitational potential energy. What must remain unchanged?
Initial and finalphysical heights unchangedChosen zeroreference height changedupward is positive; schematic, not to scale
  • A. Every numerical value of $U_g$
  • B. The sign of every $U_g$ value
  • C. Every physically calculated $\Delta U_g$
  • D. The chosen height coordinates
Changing the zero shifts all potential-energy values by the same constant, leaving differences unchanged. Answer C.
Q16. Medium3.3
For two masses with $U=-Gm_1m_2/r$, the separation doubles. How does the potential energy change?
m₁m₂1rpoint masses; separations drawn to scale
  • A. It doubles in magnitude.
  • B. It becomes four times as negative.
  • C. It becomes positive.
  • D. Its magnitude is halved.
$U\propto-1/r$, so doubling $r$ halves the magnitude of the negative potential energy. Answer D.
Q17. Hard3.3
Three identical masses $m$ sit at the vertices of an equilateral triangle of side $r$. What is the total gravitational potential energy?
mmmrrr
  • A. $-3Gm^2/r$
  • B. $-Gm^2/r$
  • C. $-6Gm^2/r$
  • D. $0$
There are three distinct interacting pairs, each with $-Gm^2/r$. Answer A.
Q18. Medium3.4
A ball falls near Earth with negligible air resistance. For the system {ball + Earth}, what happens to total mechanical energy?
Ball motionair resistance negligibleSystemball + Earthupward is positive; schematic, not to scale
  • A. It increases because $K$ increases.
  • B. It remains constant.
  • C. It decreases because $U_g$ decreases.
  • D. It is zero throughout.
Within the ball–Earth system, $U_g$ decreases while $K$ increases by the same amount. Answer B.
Q19. Easy3.4
A system begins with $50\,\mathrm J$ of mechanical energy. A nonconservative interaction dissipates $20\,\mathrm J$ and no external work is done. What mechanical energy remains?
Initial mechanical50 JThermal conversion20 Jschematic; arrow lengths not to scale
  • A. 70 J
  • B. 50 J
  • C. 30 J
  • D. 20 J
Mechanical energy decreases by the dissipated amount: $50-20=30\,\mathrm J$. Answer C.
Q20. Medium3.4
A frictionless spring–block system is released from compression $A$. If the compression is instead $A/2$, how does the total mechanical energy compare?
Run Acompression A; restRun Bcompression A/2; restschematic; arrow lengths not to scale
  • A. Half as large
  • B. Twice as large
  • C. The same
  • D. One-quarter as large
Spring energy is proportional to $A^2$, so $(1/2)^2=1/4$. Answer D.
Q21. Medium3.4
For a frictionless spring–block system of total energy $E$, what is the kinetic energy at $x=A/2$?
amplitude A; current position x = A/2
  • A. $3E/4$
  • B. $E/4$
  • C. $E/2$
  • D. $E$
$U_s/E=(A/2)^2/A^2=1/4$, so $K=E-U_s=3E/4$. Answer A.
Q22. Medium3.4
Two frictionless tracks have different shapes but the same initial and final heights. An object starts from rest at the same initial height on either track. Compare its final speeds.
startsame final level
  • A. The steeper track gives a larger final speed.
  • B. The final speeds are equal.
  • C. The longer track gives a larger final speed.
  • D. The result depends on mass.
With only conservative gravity, the same vertical drop gives the same change in kinetic energy. Answer B.
Q23. Hard3.4
A projectile is at the highest point of its path. Which statement is correct if air resistance is negligible?
vₓvᵧ = 0
  • A. Its total kinetic energy is zero.
  • B. Its total mechanical energy is zero.
  • C. It still has kinetic energy if its horizontal velocity is nonzero.
  • D. Its gravitational potential energy must equal its initial kinetic energy.
Only the vertical velocity component is zero at the top; horizontal motion can remain. Answer C.
Q24. Hard3.4
A block just maintains contact at the top of a frictionless vertical loop of radius $R$. What is its minimum speed there?
centercircular pathschematic; vectors labeled by their physical role
  • A. $2\sqrt{gR}$
  • B. $gR$
  • C. $\sqrt{2gR}$
  • D. $\sqrt{gR}$
At the minimum-contact condition, $N=0$ and $mg=mv^2/R$, giving $v=\sqrt{gR}$. Answer D.
Q25. Hard3.4
A spring launches a block from a frictionless section onto a rough horizontal region. If spring compression $D$ is doubled while all else is fixed, how does the stopping distance change?
compression Drough regionat restspring section frictionless; schematic
  • A. It becomes 4 times as large.
  • B. It doubles.
  • C. It halves.
  • D. It is unchanged.
Initial spring energy is proportional to $D^2$, while friction work is proportional to distance. Answer A.
Q26. Medium3.4
A falling block is treated as a system containing only the block. Which statement is correct?
Block motionfallingSelected systemblock only; Earth outsideupward is positive; schematic, not to scale
  • A. The block has gravitational potential energy inside this one-object system.
  • B. Gravity does positive external work and the block’s kinetic energy increases.
  • C. Mechanical energy of the block must be constant.
  • D. Gravity is an internal force of the block-only system.
For a block-only system, gravity is external and transfers energy into the block by work. Answer B.
Q27. Easy3.4
An energy-bar chart for a frictionless system shows total mechanical energy constant while $U$ decreases. What must happen to $K$?
initialU0.75EK0.25ElaterU0.25EK0.75E
  • A. It must also decrease.
  • B. It must remain constant.
  • C. It must increase by the same amount.
  • D. It becomes negative.
With constant $K+U$, a decrease in $U$ is balanced by an equal increase in $K$. Answer C.
Q28. Easy3.5
A machine transfers $600\,\mathrm J$ of energy in $3.0\,\mathrm s$. What is its average power?
Transferred energy600 JElapsed time3.0 sschematic; arrow lengths not to scale
  • A. 1800 W
  • B. 600 W
  • C. 20 W
  • D. 200 W
$P_{avg}=\Delta E/\Delta t=600/3=200\,\mathrm W$. Answer D.
Q29. Medium3.5
A vehicle moves at $15\,\mathrm{m\,s^{-1}}$ while a $400\,\mathrm N$ driving force acts parallel to its velocity. What is the instantaneous power?
400 Nvelocity 15 m/s
  • A. 6.0 kW
  • B. 26.7 W
  • C. 415 W
  • D. 0.60 kW
$P=Fv=400(15)=6000\,\mathrm W=6.0\,\mathrm{kW}$. Answer A.
Q30. Medium3.5
A constant-power motor accelerates a car from rest for a fixed time. Use the ideal energy model and neglect resistive losses. If the car mass is changed from $m$ to $4m$, how does the final speed change?
Car Amass m; starts at restCar Bmass 4m; starts at restsame power and elapsed time; ideal model
  • A. It becomes $v/4$.
  • B. It becomes $v/2$.
  • C. It remains $v$.
  • D. It becomes $2v$.
For fixed $P\Delta t$, $\tfrac12mv^2$ is fixed, so $v\propto1/\sqrt m$; multiplying mass by 4 halves speed. Answer B.

Free-Response Training · 8 Questions

FRQ 1. Hard3.410 pointsMathematical Routines
Summit-to-hill energy chain
A small cart of mass $m$ is released from rest at height $H$ above the bottom of a frictionless track. It passes through the bottom and then moves over the top of a circular hill of radius $R$, where the track is convex downward. The top of the hill is at height $h$ above the bottom. The cart is guided along the approach so it reaches the summit without any earlier loss of contact; the requested contact condition is at the summit only.

(a) [2 pts] Draw and label the forces on the cart at the top of the hill.
(b) [3 pts] Starting with conservation of energy, derive the cart speed $v_t$ at the top in terms of $g,H,h$.
(c) [3 pts] Starting with Newton’s second law in the radial direction, derive the normal force at the top.
(d) [2 pts] State the condition on $H$ for the cart to reach the top and remain in contact there; justify physically.
hHpoint object; track schematic, not to scale
Suggested scoring guide
(a) 2 pts: weight $mg$ downward; normal force upward, away from the hill surface. No separate “centripetal force” arrow.
(b) 3 pts: $mgH=mgh+\tfrac12mv_t^2$, so $\boxed{v_t=\sqrt{2g(H-h)}}$.
(c) 3 pts: toward the center is downward, so $mg-N=mv_t^2/R$. Thus $\boxed{N=mg-mv_t^2/R}$.
(d) 2 pts: For passage over the summit, $H>h$. The limiting $H=h$ gives zero speed at the summit and does not describe passage. Contact at the convex summit also requires $N\ge0$. The limiting case is $N=0$, so $v_t^2\le gR$. Using the energy result gives $2g(H-h)\le gR$, hence $\boxed{h\lt H\le h+R/2}$. If the release height is too large, the cart arrives too fast for gravity alone to provide the required downward curvature while the track can only push outward.
Total: 10 points
FRQ 2. Hard3.3–3.410 pointsMathematical Routines
Falling mass compresses a spring
A block of mass $m$ is released from rest a vertical distance $y$ above the top of an initially uncompressed vertical spring of spring constant $k$. The block moves down a frictionless vertical guide and makes smooth contact with a massless plate attached to the spring; no energy is dissipated at contact. It remains in contact while the spring compresses a maximum distance $x$.

(a) [2 pts] Choose a system that lets you use energy conservation without external gravitational work, and identify its initial and final energy stores.
(b) [4 pts] Starting with conservation of energy, derive an equation relating $x$ to $m,k,g,y$.
(c) [2 pts] If the release height $y$ is increased, predict whether $x$ increases, decreases, or stays the same. Justify without algebra.
(d) [2 pts] Explain why using $mgy=\tfrac12kx^2$ would be incomplete.
released from restmaximum compressionyrelaxed topxspring fixed below; frictionless vertical guide
Suggested scoring guide
(a) 2 pts: choose block + Earth + spring. Initially the energy is gravitational potential; at maximum compression the block is momentarily at rest and energy is gravitational + spring potential.
(b) 4 pts: choose zero gravitational potential at the original spring top. Initial $U_g=mgy$. Final block position is $x$ below that level, so $U_{g,f}=-mgx$ and $U_s=\tfrac12kx^2$. Therefore $mgy=-mgx+\tfrac12kx^2$, or $\boxed{\tfrac12kx^2=mg(y+x)}$.
(c) 2 pts: greater release height means more initial gravitational potential energy, so more spring energy is required at the turning point; $x$ increases.
(d) 2 pts: the block continues moving downward while compressing the spring, losing an additional $mgx$ of gravitational potential energy.
Total: 10 points
FRQ 3. Hard3.212 pointsTranslation Between Representations
Force–position graph to motion representations
A $2.0\,\mathrm{kg}$ cart moves right at $2.0\,\mathrm{m/s}$ at $x=0$. The net force parallel to the track increases linearly from 0 N at $x=0$ to $12\,\mathrm N$ at $x=3\,\mathrm m$, remains $12\,\mathrm N$ from $x=3$ to $5\,\mathrm m$, then decreases linearly to 0 N at $x=6\,\mathrm m$.

(a) [3 pts] Sketch the described $F_{net}$ versus $x$ graph with numerical scales.
(b) [3 pts] Use the graph to calculate the cart’s kinetic energy at $x=5\,\mathrm m$.
(c) [3 pts] Determine the cart speed at $x=5\,\mathrm m$.
(d) [3 pts] Sketch a qualitative $K$ versus $x$ graph from $0$ to $6\,\mathrm m$ and explain why its slope changes in the way shown.
Initial cartm = 2 kg; v = 2 m/sForce dataspecified in questionschematic; arrow lengths not to scale
Suggested scoring guide
(a) 3 pts: correct linearly rising segment 0→12 N over 0→3 m, horizontal 12 N over 3→5 m, linearly falling to 0 N at 6 m; axes/scales labeled.
(b) 3 pts: work to 5 m is triangle $\tfrac12(3)(12)=18$ J plus rectangle $(2)(12)=24$ J, total $42$ J. Initial $K_i=\tfrac12(2)(2^2)=4$ J, so $\boxed{K(5)=46\,\mathrm J}$.
(c) 3 pts: $46=\tfrac12(2)v^2$, so $\boxed{v=\sqrt{46}\approx6.78\,\mathrm{m\,s^{-1}}}$.
(d) 3 pts: $K(x)$ starts at 4 J and rises throughout. Its local slope equals $F_{net}$: slope increases from 0→3 m, is constant from 3→5 m, then decreases to zero by 6 m.
Total: 12 points
FRQ 4. Hard3.3–3.412 pointsTranslation Between Representations
Turning points reveal mechanical-energy dissipation
An attached block–spring system on a horizontal track is released from rest at x = −A and first stops on the other side at x = +B, where $0\lt B\lt A$. A rough patch between the endpoints dissipates mechanical energy; outside that patch the track is frictionless. The spring constant is k.

(a) [3 pts] Draw initial and final bars for kinetic and elastic potential energy, and a separate bar for the energy dissipated.
(b) [3 pts] Sketch $U_s(x)$ and mark the two turning-point mechanical-energy levels on the same axes.
(c) [3 pts] Derive the mechanical energy dissipated in the crossing.
(d) [3 pts] For $B=A/2$, determine the fraction of initial mechanical energy dissipated and explain the unchanged potential-energy curve.
initial x = −A; final x = +B, where 0 < B < A
Suggested scoring guide
(a) 3 pts: Initial K=0 and $U_s=\tfrac12kA^2$; final K=0 and $U_s=\tfrac12kB^2$; dissipation equals the difference. Use a common bar scale; represent zero with a line.
(b) 3 pts: $U_s=\tfrac12kx^2$ is one upward parabola. Mark initial level $\tfrac12kA^2$ at −A and lower final level $\tfrac12kB^2$ at +B. Total mechanical energy drops while traversing the rough patch; these are endpoint levels, not one constant line for the crossing.
(c) 3 pts: Initial mechanical energy equals final mechanical energy plus dissipation: $\boxed{E_{diss}=\tfrac12k(A^2-B^2)}$.
(d) 3 pts: For B=A/2, the remaining energy is one-quarter of the initial value, so three-quarters is dissipated. The spring’s potential curve is unchanged because its constant and deformation-energy law remain the same.
Total: 12 points
FRQ 5. Hard3.2–3.410 pointsExperimental Design and Analysis
Determine kinetic friction from spring launches
A block of known mass $m$ is launched by a horizontal spring of known spring constant $k$ from several compressions $D$. After a frictionless spring launch and leaving the spring, it crosses a rough horizontal strip and stops. The rough strip is long enough to stop the block in every trial. You have a meterstick but no force sensor.

(a) [4 pts] Describe a procedure to determine $\mu_k$, including what is varied and what is measured.
(b) [2 pts] Derive a linear graph that can be used to determine $\mu_k$.
(c) [2 pts] State how the slope gives $\mu_k$.
(d) [2 pts] Give one uncertainty-reduction method and one sign that the simple friction model may be failing.
compression Drough regionat restspring section frictionless; schematic
Suggested scoring guide
(a) 4 pts: use several measured spring compressions $D$; release from rest; measure stopping distance $x$ on the rough strip; repeat/average each setting; keep block/surface unchanged.
(b) 2 pts: $\tfrac12kD^2=\mu_kmgx$, so $x=[k/(2\mu_kmg)]D^2$. Plot $x$ vertically against $D^2$ horizontally.
(c) 2 pts: slope $S=k/(2\mu_kmg)$, so $\boxed{\mu_k=k/(2mgS)}$.
(d) 2 pts: repeat/average and use a best-fit line over a wide range; systematic curvature or a substantial nonzero intercept can signal model/surface issues.
Total: 10 points
FRQ 6. Hard3.510 pointsExperimental Design and Analysis
Measure constant motor power
A small battery-powered winch lifts different known masses vertically through a marked interval after reaching steady speed. Assume the winch operates at approximately constant mechanical output power over the tested range. You have known masses, a meterstick, and a stopwatch.

(a) [4 pts] Design a procedure to test the constant-power model and determine the power.
(b) [2 pts] Identify a graph whose slope equals the mechanical power.
(c) [2 pts] Explain how you would use repeated trials and the graph to assess the model.
(d) [2 pts] If the lifting speed decreases for larger masses, explain why that can still be consistent with constant power.
motormsteady liftinghvertical cord; air resistance negligible
Suggested scoring guide
(a) 4 pts: lift several known masses through a measured common height $h$; allow the load to reach steady speed before the measured interval, then time each lift; calculate $\Delta U_g=mgh$ for each; use multiple masses and repeat timings.
(b) 2 pts: plot energy gained $mgh$ vertically versus lift time $t$ horizontally. For constant power, $\Delta E=Pt$, so slope is $P$.
(c) 2 pts: average repeated times, use a best-fit line, and inspect residuals/intercept; random scatter is expected but systematic curvature indicates power is not constant.
(d) 2 pts: $P=Fv\approx mgv$ during steady lifting, so for fixed $P$, larger $m$ requires smaller $v$.
Total: 10 points
FRQ 7. Hard3.48 pointsQualitative/Quantitative Translation
Compression versus stopping distance
A block of mass $m$ is launched from a spring of constant $k$ compressed by $D$. After a frictionless spring launch and leaving the spring, the block enters a rough horizontal region with coefficient $\mu_k$ and stops after distance $x$.

(a) [2 pts] Without equations, predict how $x$ changes if the compression is doubled. Justify.
(b) [3 pts] Starting with an energy principle, derive $x$ in terms of $k,D,\mu_k,m,g$.
(c) [1 pt] State whether the expression agrees with part (a).
(d) [2 pts] Use the expression to predict the effect of doubling the block mass and justify.
compression Drough regionat restspring section frictionless; schematic
Suggested scoring guide
(a) 2 pts: stopping distance becomes four times larger because spring energy grows with the square of compression while each meter of rough track dissipates the same amount for fixed mass/surface.
(b) 3 pts: $\tfrac12kD^2=\mu_kmgx$, so $\boxed{x=kD^2/(2\mu_kmg)}$.
(c) 1 pt: yes; $x\propto D^2$.
(d) 2 pts: doubling $m$ halves $x$ because $x\propto1/m$; the heavier block experiences a larger friction force for the same $\mu_k$.
Total: 8 points
FRQ 8. Hard3.58 pointsQualitative/Quantitative Translation
Same power, different cars
A constant-power motor accelerates Car A of mass $m$ from rest for time $t$, reaching speed $v$. The same motor then accelerates Car B of mass $4m$ from rest for the same time, with negligible resistive losses. Treat startup from rest as an ideal energy model; a real motor has a brief finite-force startup.

(a) [2 pts] Predict Car B’s final speed relative to $v$ without doing algebra. Justify.
(b) [3 pts] Derive the speed of an object accelerated from rest for time $t$ by constant power $P$.
(c) [1 pt] Use the result to check the prediction in part (a).
(d) [2 pts] If instead Car A runs for four times as long, predict its new speed factor and justify.
Car Amass mCar Bmass 4mstart at rest; same elapsed time t
Suggested scoring guide
(a) 2 pts: Car B reaches half the speed; the same transferred energy must become kinetic energy of a larger mass. Because $K$ depends on $v^2$, the speed is not reduced by a factor of 4.
(b) 3 pts: $Pt=\Delta K=\tfrac12mv^2$, so $\boxed{v=\sqrt{2Pt/m}}$.
(c) 1 pt: with $m\to4m$, $v\to v/2$, consistent with the qualitative prediction.
(d) 2 pts: $v\propto\sqrt t$, so multiplying time by 4 doubles the speed.
Total: 8 points